基于双五棱镜组件的大间距光轴平行性检测方法

张磊; 邱伟; 张凯

doi:10.3788/IRLA201847.0717005

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于双五棱镜组件的大间距光轴平行性检测方法

张磊, 邱伟, 张凯

文章导航 > 红外与激光工程 > 2018 > 47(7): 717005-0717005(5)

张磊, 邱伟, 张凯. 基于双五棱镜组件的大间距光轴平行性检测方法[J]. 红外与激光工程, 2018, 47(7): 717005-0717005(5). doi: 10.3788/IRLA201847.0717005

引用本文:

张磊, 邱伟, 张凯. 基于双五棱镜组件的大间距光轴平行性检测方法[J]. 红外与激光工程, 2018, 47(7): 717005-0717005(5). doi: 10.3788/IRLA201847.0717005

Zhang Lei, Qiu Wei, Zhang Kai. Detection method of large space optical axis parallelism based on double pentaprism components[J]. Infrared and Laser Engineering, 2018, 47(7): 717005-0717005(5). doi: 10.3788/IRLA201847.0717005

Citation:

Zhang Lei, Qiu Wei, Zhang Kai. Detection method of large space optical axis parallelism based on double pentaprism components[J]. Infrared and Laser Engineering, 2018, 47(7): 717005-0717005(5). doi: 10.3788/IRLA201847.0717005

基于双五棱镜组件的大间距光轴平行性检测方法

doi: 10.3788/IRLA201847.0717005

张磊¹,
邱伟^2, ,,
张凯¹

1.
长春理工大学光电工程学院光电测控与光信息传输技术教育部重点实验室,吉林长春 130022;
2.
上海航天控制技术研究所,上海 200000

基金项目:

国家自然科学基金（11474037）

详细信息

作者简介:
张磊(1981-),男,副教授,博士,主要从事光学测试方面的研究。Email:zhangl@cust.edu.cn

通讯作者: 邱伟(1983-),男,工程师,博士,主要从事光电探测与制导方面的研究。Email:wallenq@163.com

中图分类号: TN206

Detection method of large space optical axis parallelism based on double pentaprism components

Zhang Lei¹,
Qiu Wei^{2
, ,},
Zhang Kai¹

1.
Key Laboratory of Optoelectric Measurement and Optical Information Transmission Technology of Ministry of Education,School of Opto-Electronic Engineering,Changchun University of Science and Technology,Changchun 130022,China;
2.
Shanghai Aerospace Control Technology Institute,Shanghai 200000,China

摘要: 光轴平行性是多光轴光电设备的重要参数，对其进行检测十分必要。随着光电设备复杂程度的逐步增加，其光轴之间的距离不断增大，传统的小口径检测手段已经不能满足现有光电设备的检测需求。针对大间距光轴之间的平行性的检测，设计了一种基于双五棱镜结构的扩径组件，实现了平行光管的出射光束的平移，并利用双光楔结构对扩径组件进行修正，将平行光管的有效口径由300 mm扩展至1 200 mm。对扩径组件进行数学建模分析和实际装调，并对检测系统进行整体精度测试。实验结果表明：平行光管出射的光束经扩径组件后能够保持良好的平行性，其平行误差在11以内，满足大间距光轴检测的精度要求。
- 平行性检测 /
- 光束平移 /
- 动态光学 /
- 光轴
Abstract: The optical axis parallelism was an important parameter for the multi optical axis optoelectronic device. It was very necessary to detect the parallelism. With the gradual increase in the complexity of optoelectronic devices, the distance between optical axes was increasing. The traditional small aperture detection methods could no longer meet the requirements of existing photoelectric devices. In order to detect the parallelism between large space optical axis, a expanding component based on double pentaprism structure was designed to realize the translation of the beam emitted from the collimator, and the error of the expanding component was modified by double wedge structure. The effective aperture of the collimator was extended from 300 mm to 1 200 mm. Mathematical modeling analysis and actual adjustment of the expanding component were carried out and the precision experiment was done. The experimental results of the detecting system show that the beam emitted by the collimator could maintain good parallelism after expanding. The parallelism deviation is within 11, which could meet the precision requirements of large space optical axis detection.
- measurement of parallelism /
- beam translation /
- dynamic optics /
- optical axis

[1]	Huang Xin, Shen Xiangheng, Ye Lu. Development of testing instrument of optical-axial parallelism for multi-axial systems[J]. Journal of Applied Optics, 2015, 36(1):19-23. (in Chinese)
[2]	Liu B Q, Zhao C. Design and realization of a collimator for checking the multi-spectral and multi-axis parallelism[J]. Instrumentation Technology, 2015(5):5-7.
[3]	Liu Yachen, Zhang Xinlei, Gao Yang. Study for multi-spectral axes parallelism calibration of photoelectric tracking and aiming system[J]. Journal of Astronautic Metrology and Measurement, 2015(4):5-8. (in Chinese)
[4]	Xu Haiyan, Su Shibin, Zhang Min, et al. Design and research on detection system for multi-optical axes consistency[J]. Journal of Gun Launch Control, 2013(4):78-81. (in Chinese)
[5]	Xiao Z, Guo X, Xia Y, et al. Research on detection system of optical sights triaxial parallelism[J]. Optik, 2014, 125(16):4427-4430.
[6]	Zhang Lei, Cui Qiyin, Zhang Kai. Multi-axis parallelism measuring system with temperature insensitivity[J]. Journal of Changchun University of Science and Technology (Natural Science Edition), 2017, 40(4):10-13. (in Chinese)
[7]	Zhou Zinan, Ma Jun, Yu Pei. Laser/infrared optical system design of common optical path and athermalization[J]. Laser Optoelectronics Progress, 2015, 52(1):12202. (in Chinese)
[8]	Shi Long, Chen Ning, Wang Bing, et al. Measurement methods for parallelism of optical paths for vehicle-based laser platform[J]. Infrared and Laser Engineering, 2016, 45(S1):S117002. (in Chinese)
[9]	Yan Zongqun, Yang Jianchang, Xie Zhihong. Optical axis parallelism calibration system of large-scale multi-spectral multi-optical axis[J]. Journal of Applied Optics, 2016, 37(6):823-828. (in Chinese)
[10]	Chen Zhibin, Xiao Wenjian, Ma Dongxi. A method for large distance multi-optical axis parallelism online detection[J]. Acta Optica Sinica, 2017, 37(1):112006. (in Chinese)
[11]	Li Zhengyang, Fu Yuegang. Optical characteristics of right-angle roof prism and corner-cube prism[J]. Journal of Applied Optics, 2008, 29(5):833-836. (in Chinese)

[1]	何文彦, 孔明东, 任戈, 魏铭. 非平行光束对窄带滤光片光谱性能的影响 . 红外与激光工程, 2022, 51(8): 20210757-1-20210757-7. doi: 10.3788/IRLA20210757
[2]	李慧, 樊宏杰, 陈前荣, 邹前进. 运动平移台静态指向误差建模、测试与修正 . 红外与激光工程, 2021, 50(12): 20210161-1-20210161-7. doi: 10.3788/IRLA20210161
[3]	张超, 邢辉, 宋俊儒, 闫钧华, 张凯, 李重阳, 刘志远, 金忠瑞. 大口径凹椭球面反射镜光轴偏心测量方法 . 红外与激光工程, 2021, 50(12): 20210196-1-20210196-7. doi: 10.3788/IRLA20210196
[4]	胡波, 吴超鹏, 杨永, 张旭, 宋宏, 陶军. 水下光源主光轴光谱辐照度分布模型 . 红外与激光工程, 2019, 48(9): 910001-0910001(7). doi: 10.3788/IRLA201948.0910001
[5]	高春清, 张世坤, 付时尧, 胡新奇. 涡旋光束的自适应光学波前校正技术 . 红外与激光工程, 2017, 46(2): 201001-0201001(6). doi: 10.3788/IRLA201746.0201001
[6]	王阳, 黄煜, 李占峰, 王淑荣. 利用恒星对天文观测系统光轴平行性检校 . 红外与激光工程, 2017, 46(5): 517003-0517003(6). doi: 10.3788/IRLA201746.0517003
[7]	于海, 万秋华, 梁立辉, 王树洁. 光电编码器的动态误码检测系统 . 红外与激光工程, 2016, 45(9): 917002-0917002(6). doi: 10.3788/IRLA201645.0917002
[8]	肖文健, 马东玺, 陈志斌, 张勇, 肖程, 秦梦泽. 大尺寸空间角测量系统光轴指向不确定度评定 . 红外与激光工程, 2016, 45(11): 1118004-1118004(7). doi: 10.3788/IRLA201645.1118004
[9]	王贵圆, 常本康, 富容国, 冯澍, 孙斌, 李英杰. 分光轴式多源图像融合系统近距离配准方法研究 . 红外与激光工程, 2016, 45(11): 1104003-1104003(7). doi: 10.3788/IRLA201645.1104003
[10]	罗奇, 李新阳. 自适应光学系统光轴抖动抑制控制器设计 . 红外与激光工程, 2016, 45(4): 432003-0432003(6). doi: 10.3788/IRLA201645.0432003
[11]	施龙, 陈宁, 王兵, 邵帅, 杨词银, 董宇星, 郭汝海. 激光车载平台光路平行性检测方法 . 红外与激光工程, 2016, 45(S1): 152-156. doi: 10.3788/IRLA201645.S117002
[12]	郝爱花, 胡炳樑. 非平行光束光栅照明C-T成像光谱仪消像散研究与设计 . 红外与激光工程, 2015, 44(7): 2132-2136.
[13]	母一宁, 王贺, 李平, 姜会林. 光斑尺寸对光轴检测的约束分析及验证试验 . 红外与激光工程, 2015, 44(3): 1061-1067.
[14]	周雷刚, 梁庭, 高利聪. 影响全天域光轴平行度检测精度因素分析 . 红外与激光工程, 2015, 44(11): 3413-3417.
[15]	席志红, 初守艳, 肖易寒. 基于预选算法的全局平移运动参数估计 . 红外与激光工程, 2013, 42(11): 3144-3149.
[16]	魏枫林, 母一宁, 尚瑞瑞, 刘泉. 基于四象序列的最大熵原则的光轴对准方法 . 红外与激光工程, 2013, 42(7): 1902-1906.
[17]	周于鸣, 赵野, 王海超, 闻广泉. 大口径轻质反射镜光轴水平卸载支撑方法 . 红外与激光工程, 2013, 42(5): 1285-1290.
[18]	孙高, 朱明超, 刘慧, 贾宏光. 半捷联导引头光轴稳定性 . 红外与激光工程, 2013, 42(2): 489-494.
[19]	石进峰, 吴清文, 杨献伟, 刘宏伟, 黄勇. 光轴竖直大口径长焦距平行光管热设计 . 红外与激光工程, 2013, 42(6): 1617-1622.
[20]	陈哲, 吕锋, 葛菁华, 张军, 余健辉, 林宏奂, 隋展. 增强偏振态二维无序分布特性的光学晶体退偏器 . 红外与激光工程, 2013, 42(5): 1258-1264.

点击查看大图

计量

文章访问数: 286
HTML全文浏览量: 65
PDF下载量: 31
被引次数: 0

基于双五棱镜组件的大间距光轴平行性检测方法

doi: 10.3788/IRLA201847.0717005

张磊¹,
邱伟^{2,
,},
张凯¹

1. 长春理工大学光电工程学院光电测控与光信息传输技术教育部重点实验室,吉林长春 130022;

2. 上海航天控制技术研究所,上海 200000

作者简介:
张磊(1981-),男,副教授,博士,主要从事光学测试方面的研究。Email:zhangl@cust.edu.cn

通讯作者: 邱伟(1983-),男,工程师,博士,主要从事光电探测与制导方面的研究。Email:wallenq@163.com

收稿日期: 2018-02-05
修回日期: 2018-03-03
刊出日期: 2018-07-25

基金项目:

国家自然科学基金（11474037）

中图分类号: TN206

关键词:

摘要: 光轴平行性是多光轴光电设备的重要参数，对其进行检测十分必要。随着光电设备复杂程度的逐步增加，其光轴之间的距离不断增大，传统的小口径检测手段已经不能满足现有光电设备的检测需求。针对大间距光轴之间的平行性的检测，设计了一种基于双五棱镜结构的扩径组件，实现了平行光管的出射光束的平移，并利用双光楔结构对扩径组件进行修正，将平行光管的有效口径由300 mm扩展至1 200 mm。对扩径组件进行数学建模分析和实际装调，并对检测系统进行整体精度测试。实验结果表明：平行光管出射的光束经扩径组件后能够保持良好的平行性，其平行误差在11以内，满足大间距光轴检测的精度要求。

English Abstract

Detection method of large space optical axis parallelism based on double pentaprism components

1. Key Laboratory of Optoelectric Measurement and Optical Information Transmission Technology of Ministry of Education,School of Opto-Electronic Engineering,Changchun University of Science and Technology,Changchun 130022,China;

2. Shanghai Aerospace Control Technology Institute,Shanghai 200000,China

Received Date: 2018-02-05
Rev Recd Date: 2018-03-03
Publish Date: 2018-07-25

Keywords:

Abstract: The optical axis parallelism was an important parameter for the multi optical axis optoelectronic device. It was very necessary to detect the parallelism. With the gradual increase in the complexity of optoelectronic devices, the distance between optical axes was increasing. The traditional small aperture detection methods could no longer meet the requirements of existing photoelectric devices. In order to detect the parallelism between large space optical axis, a expanding component based on double pentaprism structure was designed to realize the translation of the beam emitted from the collimator, and the error of the expanding component was modified by double wedge structure. The effective aperture of the collimator was extended from 300 mm to 1 200 mm. Mathematical modeling analysis and actual adjustment of the expanding component were carried out and the precision experiment was done. The experimental results of the detecting system show that the beam emitted by the collimator could maintain good parallelism after expanding. The parallelism deviation is within 11, which could meet the precision requirements of large space optical axis detection.