基于激光跟踪仪的快速镜面准直与姿态测量方法

杨振; 沈越; 邓勇; 李丛

doi:10.3788/IRLA201847.1017001

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于激光跟踪仪的快速镜面准直与姿态测量方法

杨振, 沈越, 邓勇, 李丛

文章导航 > 红外与激光工程 > 2018 > 47(10): 1017001-1017001(6)

杨振, 沈越, 邓勇, 李丛. 基于激光跟踪仪的快速镜面准直与姿态测量方法[J]. 红外与激光工程, 2018, 47(10): 1017001-1017001(6). doi: 10.3788/IRLA201847.1017001

引用本文:

杨振, 沈越, 邓勇, 李丛. 基于激光跟踪仪的快速镜面准直与姿态测量方法[J]. 红外与激光工程, 2018, 47(10): 1017001-1017001(6). doi: 10.3788/IRLA201847.1017001

Yang Zhen, Shen Yue, Deng Yong, Li Cong. Rapid cubic prism collimation and attitude measurement method based on laser tracker[J]. Infrared and Laser Engineering, 2018, 47(10): 1017001-1017001(6). doi: 10.3788/IRLA201847.1017001

Citation:

Yang Zhen, Shen Yue, Deng Yong, Li Cong. Rapid cubic prism collimation and attitude measurement method based on laser tracker[J]. Infrared and Laser Engineering, 2018, 47(10): 1017001-1017001(6). doi: 10.3788/IRLA201847.1017001

基于激光跟踪仪的快速镜面准直与姿态测量方法

doi: 10.3788/IRLA201847.1017001

1.
信息工程大学地理空间信息学院,河南郑州 450001

详细信息

作者简介:
杨振(1981-),男,讲师,主要从事精密工程测量方面的研究。Email:12290074@sina.com

中图分类号: P258

Rapid cubic prism collimation and attitude measurement method based on laser tracker

1.
Institute of Surveying and Mapping,Information Engineering University,Zhengzhou 450001,China

摘要: 提出了一种利用激光跟踪仪进行镜面准直和姿态测量的方法，分析了测量精度。分别利用高精度电子经纬仪与激光跟踪仪对单个立方镜和双立方镜进行准直和姿态测量，计算固定立方镜相邻镜面夹角和双立方镜坐标系间的转换参数，对比新方法的测量精度。同时比较测量效率、测量环境要求。实验结果显示：比于传统镜面拟合法低于0.5'的准直测量精度，新方法精度达到10量级，与主流的经纬仪方法相当；同时，新方法在测量效率上较经纬仪方法提高1倍以上，对测量环境的要求也较为宽松，在实际生产中可以代替经纬仪进行准直与姿态测量工作。
- 准直 /
- 激光跟踪仪 /
- 姿态测量 /
- 立方镜
Abstract: A method of laser cubic prism collimation and attitude measurement was proposed in this paper, and the accuracy was analyzed. A single cubic prism and double cubic prisms were collimated and measured respectively by using high precision electronic theodolites and laser tracker system. The angle of adjacent surface and coordinate transformation parameters were calculated, and the measuring accuracy of new method was compared. The measurement efficiency and environmental requirements was also compared. The experiments results show that the new method achieved an accuracy of 10, which is significantly inproved compared to other traditional methods with an accuracy of 0.5', indicating that this new method had the equivalent accuracy to other mainstream theodolite method. At the same time the efficiency of new method was improved by more than double, and the requirements for the measurement environment were also more relaxed. It could replace the method of theodolite in the actual production.
- collimation /
- laser tracker /
- attitude measurement /
- cubic prism

[1]	Wang Zhi, Wu Guodong. Calibration of transition matrix on cubic prisms in mapping camera and star sensor[J]. Optics and Precision Engineering, 2012, 1(20):96-101. (in Chinese)
[2]	Li Guangyun, Li Zongchun. The Principles and Applications of Industrial Measuring Systems[M]. Beijing:Surveying and Mapping Press, 2011:4-12. (in Chinese)
[3]	Zhang Jie, Wang Jinghai, Shi Lei, et al. The research of real-time attitude measurement based on theodolite by using auto collimation[J]. Opto-Electronic Engineering, 2015, 5(42):40-44. (in Chinese)
[4]	Yan Yonggang, Ouyang Jianfei, Liu Wanli, et al. Error correction for the tracking mirror[C]//2008 International Conference on Intelligent Computation Technology and Automation, 2008.
[5]	Cai Wei, He Xiaomei, Wang Jihu, et al. The measurement of performance of SMR with laser tracker[J]. Acta Merologica Sinica, 2008, 29(4):77-81. (in Chinese)
[6]	Chalfoun J, Bidard C, Keller D, et al. Calibration using generalized error matrices of a long reach articulated carrier[C]//IEEE Conference on Automation Science and Engineering Scottsdale, 2007:22-25.
[7]	emScon 3.0 programmers manual tracker programming interface[R]. Leica Geosystem, 2010.
[8]	Fan Baixing. Research and realization of the high precision coordinate measurement technique using laser tracker[D]. Zhengzhou:PLA Information Engineering University, 2013:18-20(in Chinese).
[9]	Ouyang Jianfei, Liu Wanli, Yan Yonggang, et al. Coordinate measuring accuracy of laser tracker[J]. Infrared and Laser Engineering, 2008,37(4):15-18. (in Chinese)
[10]	Suo Rui, Liang Zhiyong, Fan Zhijun, et al. Dual-frequency laser interferometer present state and development[J]. Laser Infrared, 2004,34(8):251-253. (in Chinese)
[11]	Liu Ying, Xie Chi, Yang Fu. Study of measurement uncertainty forecasting for laser tracker system[J]. China Measurement Test, 2010, 36(7):25-27. (in Chinese)
[12]	Wang Wei, Guo Jieying, Ren Chunzhen, et al. The vector measurement method of a special satellite thruster[J]. Journal of Changchun University of Science and Technology(Natural Science Edition), 2016, 39(2):30-34. (in Chinese)
[13]	Huang Guiping, Qing Guiqing, Ma Kaifeng. Attitude calibration on three-line array CCD camera of space stereo mapping[J]. Journal of Astronautic Metrology and Measurement, 2013, 338:17-20. (in Chinese)
[14]	Holler Y, Krause B, Petrov A, et al. Precise transfer measurement of the magnetic axis to outside monuments[J]. IEEE Transactions on Applied Superconductivity, 2008, 18(2):1645-1647.
[15]	Zhang Jie, Zhang Wei, Fan Shenghong, et al. A new method for rapid measurement of spacecraft attitude[J]. Radio Communications Technology, 2017, 4(43):67-70. (in Chinese)

[1]	许航, 熊芝, 张刘港, 冯维, 翟中生, 周维虎, 董登峰. 基于加权最小二乘的激光跟踪姿态角测量方法 . 红外与激光工程, 2022, 51(6): 20210675-1-20210675-6. doi: 10.3788/IRLA20210675
[2]	王博, 董登峰, 高兴华, 周维虎. 基于主动红外视觉探测的激光跟踪仪目标跟踪恢复方法 . 红外与激光工程, 2021, 50(4): 20200254-1-20200254-9. doi: 10.3788/IRLA20200254
[3]	平少栋, 傅云霞, 张丰, 任瑜, 孔明. 镜面反射式激光跟踪干涉测长的测量方法研究 . 红外与激光工程, 2021, 50(12): 20210624-1-20210624-7. doi: 10.3788/IRLA20210624
[4]	何俊, 张福民, 张画迪, 曲兴华. 基于球心拟合的多边激光跟踪系统自标定方法 . 红外与激光工程, 2020, 49(8): 20190438-1-20190438-7. doi: 10.3788/IRLA20190438
[5]	王聪, 陈佳夷, 栗孟娟, 王海超, 李斌. 基于干涉测量的Ф1.3 m非球面反射镜定心 . 红外与激光工程, 2020, 49(1): 0113001-0113001(6). doi: 10.3788/IRLA202049.0113001
[6]	孙永雪, 夏振涛, 韩海波, 陈丽, 刘瑞芳, 陈刚义, 王珂. 大型太阳模拟器准直镜装调及辐照特性测试 . 红外与激光工程, 2019, 48(4): 417006-0417006(5). doi: 10.3788/IRLA201948.0417006
[7]	杨自鹏, 刘敏, 周佑君, 董鹏, 杨传成. 异型载荷适配器工艺方案及精度测量方法研究 . 红外与激光工程, 2019, 48(S1): 72-77. doi: 10.3788/IRLA201948.S117001
[8]	安其昌, 张景旭, 杨飞, 赵宏超. GSSMP转动精度的测量与标定 . 红外与激光工程, 2018, 47(9): 917004-0917004(7). doi: 10.3788/IRLA201847.0917004
[9]	安其昌, 张景旭, 杨飞, 孙敬伟. GSSM系统抖动测量误差分析 . 红外与激光工程, 2017, 46(2): 217002-0217002(7). doi: 10.3788/IRLA201746.0217002
[10]	毛晓楠, 周琦, 马英超, 闫晓军, 唯乐思, 余路伟, 尹海宁, 张晴. 浦江一号卫星星敏感器在轨测量精度分析 . 红外与激光工程, 2017, 46(5): 517002-0517002(7). doi: 10.3788/IRLA201746.0517002
[11]	董登峰, 程智, 周维虎, 纪荣祎, 刘鑫. 激光跟踪仪目标脱靶量精密探测方法 . 红外与激光工程, 2016, 45(6): 617002-0617002(7). doi: 10.3788/IRLA201645.0617002
[12]	洪天琦, 黄喆, 杨凌辉, 郭思阳, 邹剑, 叶声华. 外部测量装置的捷联惯导对准方法 . 红外与激光工程, 2016, 45(5): 531002-0531002(5). doi: 10.3788/IRLA201645.0531002
[13]	李丹妮, 呼丹, 王劲松, 张继明, 安志勇. 火炮偏离角测量数字化系统 . 红外与激光工程, 2016, 45(3): 317003-0317003(5). doi: 10.3788/IRLA201645.0317003
[14]	王亚丽, 魏振忠, 张广军, 邵明伟. 视觉引导激光跟踪测量系统的Cayley变换校准方法 . 红外与激光工程, 2016, 45(5): 517001-0517001(5). doi: 10.3788/IRLA201645.0517001
[15]	邹百英, 赵慧洁, 张颖, 李建华. 离轴抛物面镜准直输出辐照度特性 . 红外与激光工程, 2015, 44(2): 688-692.
[16]	杨飞, 刘国军, 安其昌. 平差理论在大口径光学元件轮廓检测中的应用 . 红外与激光工程, 2015, 44(10): 2965-2969.
[17]	马艳, 肖胜炜, 张万经. 用于研制纳米长度标准的激光准直原子技术研究 . 红外与激光工程, 2014, 43(9): 2929-2934.
[18]	吕勇, 冯其波, 刘立双, 耿蕊, 吴思进. 基于多准直光的六自由度测量方法 . 红外与激光工程, 2014, 43(11): 3597-3602.
[19]	安其昌, 张景旭, 孙敬伟. 基于极大似然估计的TMT三镜轴系装调 . 红外与激光工程, 2013, 42(11): 3002-3007.
[20]	王超, 张涯辉, 何培龙. 利用单站光测图像确定回转体目标三维姿态 . 红外与激光工程, 2013, 42(9): 2515-2518.

点击查看大图

计量

文章访问数: 337
HTML全文浏览量: 43
PDF下载量: 38
被引次数: 0

基于激光跟踪仪的快速镜面准直与姿态测量方法

doi: 10.3788/IRLA201847.1017001

1. 信息工程大学地理空间信息学院,河南郑州 450001

作者简介:
杨振(1981-),男,讲师,主要从事精密工程测量方面的研究。Email:12290074@sina.com

收稿日期: 2018-05-05
修回日期: 2018-06-03
刊出日期: 2018-10-25

中图分类号: P258

关键词:

摘要: 提出了一种利用激光跟踪仪进行镜面准直和姿态测量的方法，分析了测量精度。分别利用高精度电子经纬仪与激光跟踪仪对单个立方镜和双立方镜进行准直和姿态测量，计算固定立方镜相邻镜面夹角和双立方镜坐标系间的转换参数，对比新方法的测量精度。同时比较测量效率、测量环境要求。实验结果显示：比于传统镜面拟合法低于0.5'的准直测量精度，新方法精度达到10量级，与主流的经纬仪方法相当；同时，新方法在测量效率上较经纬仪方法提高1倍以上，对测量环境的要求也较为宽松，在实际生产中可以代替经纬仪进行准直与姿态测量工作。