[1] Wang Lingxue, Cai Yi. Recent progress and perspectives of infrared optical systems [J]. Infrared Technology, 2019, 41(1): 1-12. (in Chinese)
[2] Huang Y F, Xu J, Bai S J. Satellite infrared remote sensing technology and its application in disaster prevention and relief [J]. Spacecraft Recovery & Remote Sensing, 2020, 41(5): 118-126. (in Chinese)
[3] Deng Sanyong, Yue Song, Zhang Dongliang, et al. Design of solid-immersion infrared metalens [J]. Infrared and Laser Engineering, 2022, 51(3): 20210360. (in Chinese)
[4] Li X D, Huang Y, Zhang P Q. Infrared imaging system and application [J]. Laser & Infrared, 2014, 44(3): 229-234. (in Chinese)
[5] Li Shijie, Xu Chao, Huang Yuetian, et al. Processing technology of cutting ZnS crystal [J]. Infrared and Laser Engineering, 2020, 49(7): 20190567. (in Chinese)
[6] Goel S. The current understanding on the diamond machining of silicon carbide [J]. Journal of Physics D: Applied Physics, 2014, 47(24): 243001. doi:  10.1088/0022-3727/47/24/243001
[7] Wang Peng, Zhang Hao, Jia Yapeng, et al. Removal of the single point diamond turning marks by spiral sine trace bonnet polishing process [J]. Infrared and Laser Engineering, 2020, 49(7): 20200212. (in Chinese) doi:  10.3788/IRLA20200212
[8] Guo Xiaoguang, Wang Xiaoli, Kang Renke, et al. Influence of tool wear on cutting mechanism of single point diamond turning of silicon [J]. Journal of Materials Science and Engineering, 2020, 38(3): 355-362, 381. (in Chinese)
[9] Mohammadi H, Poyraz H, Ravindra D, et al. An experimental study on single point diamond turning of an unpolished silicon wafer via micro-laser assisted machining [J]. Advanced Materials Research, 2014, 1017: 175-180.
[10] Zhang Haidong, Wang Xiaokun, Xue Donglin, et al. Surface testing method for ultra-large convex aspheric surfaces [J]. Chinese Optics, 2019, 12(5): 1147-1154. (in Chinese)
[11] Chang Suping, Xie Tiebang, Dai Rong, et al. High-precision non-contact profile measurement for spherical surfaces and aspherical surfaces [J]. Journal of Physics: Conference Series, 2005, 13(1): 151.
[12] Xu Lingdi, Fang Anli, Yu Jianhai, et al. Ultrasonic-vibration assisted grinding of a zerodour freeform optical mirror [J]. Optics and Precision Engineering, 2019, 27(12): 2564-2570. (in Chinese)
[13] 江梓源. 光学镜面加工机器人研抛轨迹规划及柔顺控制研究[D]. 北京: 中国矿业大学, 2021.

Jiang Ziyuan. Study on polishing trajectory planning and compliance control of optical mirror machining robot [D]. Beijing: China University of Mining and Technology, 2021. (in Chinese)
[14] Lin Zewen, Wang Zhenzhong, Huang Xuepeng, et al. Influence of robotic structural deformation on bonnet polishing removal function [J]. High Power Laser and Particle Beams, 2021, 33(5): 200293. (in Chinese) doi:  10.11884/HPLPB202133.200293
[15] Sigmund P. Theory of sputtering. I. sputtering yield of amorphous and polycrystalline targets [J]. Phys Rev, 1969, 184(2): 383.
[16] Li Wenqing, Zhang Jiyou, Wang Yonggang, et al. Evolution of full band errors in ion beam processing [J]. Spacecraft Recovery & Remote Sensing, 2020, 41(5): 47-54. (in Chinese) doi:  10.3969/j.issn.1009-8518.2020.05.006
[17] Wang Yonggang, Li Ang, Meng Xiaohui, et al. Thermal effect in ion beam figuring of optical mirror assembly [J]. Spacecraft Recovery & Remote Sensing, 2021, 42(3): 72-78. (in Chinese) doi:  10.3969/j.issn.1009-8518.2021.03.008
[18] Yang Qiushi, Zhang Jiyou, Yu Jianhai, et al. Research on error analysis of support deformation for large aperture space mirrors [J]. Spacecraft Recovery & Remote Sensing, 2020, 41(3): 60-70. (in Chinese) doi:  10.3969/j.issn.1009-8518.2020.03.007
[19] Wang Kejun, Dong Jihong, Zhou Pingwei, et al. Back support structure design of mirror of space remote sensor [J]. Infrared and Laser Engineering, 2019, 48(7): 0718004. (in Chinese) doi:  10.3788/IRLA201948.0718004
[20] Liu H, Zhu X, Kang R, et al. Three-point-support method based on position determination of supports and wafers to eliminate gravity-induced deflection of wafers [J]. Precision Engineering, 2016, 46: 339-348. doi:  10.1016/j.precisioneng.2016.06.003