[1] Jiang Y. Advanced Optical Fiber Sensing Technology [M]. Beijing: Science Press, 2009: 147-169. (in Chinese)
[2]
[3]
[4] Liao Y B, Li M, Yan C S. Modern Optical Information Sensing Principle [M]. Beijing: Tsinghua Science and Technology Press, 2009: 201-208. (in Chinese)
[5] Lee C E, Taylor H F, Markus A M, et al. Optical-fiber Fabry-Perot embedded sensor[J]. Optics Letters, 1989, 14(21): 1225-1227.
[6]
[7]
[8] San H S, Song Z J, Wang X, et al. Piezoresistive pressure sensors for harsh environments [J]. Optics and Precision Engineering, 2012, 20(3): 550-555. (in Chinese)
[9]
[10] Jia C Y. Study on miniature low pressure Fabry-Perot interferometric fiber optic sensor[D]. Dalian: Dalian Uiversity of Technology, 2009. (in Chinese)
[11]
[12] Chen Chinhsing, Chen Minchih, Liu Wenfung. Electrical power sensor based on fiber Bragg grating and piezo-electric transducer [J]. Optics and Precision Engineering, 2011, 19(9): 2255. (in Chinese)
[13] Xiao S R, Zhu P, Ben F L. Analysis on characteristics of optical fiber sensor for atmospheric pressure [J]. Optics and Precision Engineering, 2008, 16(6): 1042-1047. (in Chinese)
[14]
[15]
[16] Li M, Wang M, Li H. Optical MEMS pressure sensor based on Fabry-Perot interferometry [ J ] . Optics Express, 2006, 14 (4): 1497-1504. (in Chinese)
[17] Franssila S. Introduction to Microfabrication [M]. US: Wiley, 2010: 230-246.
[18]
[19]
[20] Zhang Z P. Optical Fiber Sensor Principle [M]. Beijing: China Metrology Press, 1991: 1304-1308. (in Chinese)
[21] Jiang Y, Tang C J. Principles and Applications of Optical Fiber Fabry-Perot Interferometer[M]. Beijing: National Defence Industry Press, 2009: 1803-1807. (in Chinese)
[22]
[23]
[24] Iliescu C, Miao J, Tay F E H. Stress control in masking layers for deep wet micromachining of Pyrex glass [J]. Sensors and Actuators A: Physical, 2005, 117(2): 286-292.
[25]
[26] Kutchoukov V G, Laugere F, Van Der Vlist W, et al. Fabrication of nanofluidic devices using glass-to-glass anodic bonding [ J ] . Sensors and Actuators A: Physical, 2004, 114 (2): 521-527.
[27] Berthold A, Nicola L, Sarro PM, et al. Glass-to-glass anodic bonding with standard IC technology thin films as intermediate layers [J]. Sensors and Actuators A: Physical, 2000, 82(1): 224-228.
[28]
[29] Zheng Z X, Lin Y F, Fen Y J. Research of 7740 Glass wet etching grooves and slot lithography graphic [J]. Journal of Xiamen University: JCR Science Edition, 2005, 44 (3): 370-372. (in Chinese)
[30]
[31] Iliescu C, Jing J, Tay F E H, et al. Characterization of masking layers for deep wet etching of glass in an improved HF/HCl solution [J]. Surface and Coatings Technology, 2005, 198(1): 314-318.