[1] |
|
[2] |
Tong Zilei. Compensation technology for the image motion of CCD camera[J]. Laser Infrared, 2005, 35(9): 628-632. (in Chinese) 童子磊.CCD相机的像移补偿技术[J].激光与红外, 2005, 35(9): 628-632. |
[3] |
|
[4] |
Zhou Li, Yang Shihong, Gao Xiaodong. Scanning control system of a simple structure step framing aerial camera[J]. Opto-Electronic Engineering, 2010, 37(10): 128-131. (in Chinese) 周黎,杨世洪,高晓东.一种简易结构步进分幅式航空相机摆扫控制系统[J]. 光电工程, 2010, 37(10): 128-131. |
[5] |
|
[6] |
Mao Minjun. The research of scanning control and image motion compensation technology in wide-field step-staring imaging[D]. Shanghai: Shanghai Institute of Technical Physics, Chinese Academy of Sciences, 2010: 31-48. (in Chinese) 毛闵军. 宽视场凝视成像的扫描控制与像移补偿技术研究[D].上海:中国科学院上海技术物理研究所,2010:31-48. |
[7] |
Ying-Shieh Kung, Nguyen Vu Quynh, Nguyen Trung Hieu, et al. Simulink/Modelsim co-simulation and FPGA realization of speed control IC for PMSM drive[C]//International Conference on Power Electronics and Engineering Application, 2011: 718-722. |
[8] |
|
[9] |
|
[10] |
Kung Y S, Chen C S, Wong K I, et al. Development of a FPGA-based control IC for PMSM drive with adaptive fuzzy control[C]//Proceedings of the IEEE Industrial Electronics 31st Annual Conference, 2005: 1544-1549. |
[11] |
|
[12] |
Chee-Mun Ong. Dynamic Simulation of Electric Machinery:Using Matlab/Simulink[M]. US: Prentice Hall, 1997. |
[13] |
Su Sike, Li Yongjun, Yang Long, et al. The DSP Principle and Design of Control System[M]. Beijing: Tsinghua University Press, 2010. (in Chinese) 粟思科,李拥军,杨龙, 等. DSP原理及控制系统设计[M]. 北京: 清华大学出版社, 2010. |
[14] |
|
[15] |
Dubey G K. Fundamentals of Electrical Drives[M]. Alpha Science, 2001. |
[16] |
|
[17] |
Takahashi I,Noguchi T. A new quick response and high efficiency control strategy of an induction motor[J]. IEEE Trans on Industrial Applications, 1986, 22(5): 821-827. |
[18] |
|
[19] |
Utkin V I. Sliding mode control design principles and application to electric drives[J]. IEEE Trans on Industrial Electronics, 1993, 40(1): 23-36. |