[1] Lv Yong, Feng Qibo, Sun Shijun, et al. Feasibility analysis of on-orbit intersection angle monitoring for three-line-array mapping camera[J]. Infrared and Laser Engineering, 2012, 41(2): 3390-3395. (in Chinese) 吕勇, 冯其波, 孙世君, 等. 三线阵测绘相机交会角在轨监测可行性分析 [J]. 红外与激光工程, 2012, 41(2): 3390-3395.
[2]
[3]
[4] Zhang Lei, Yang Jianfeng, Xue Bin, et al. Super-resolution reconstruction of Chang'e -1 satellite CCD stereo camera images [J]. Infrared and Laser Engineering, 2012, 41 (2): 404-408. (in Chinese) 张磊, 杨建峰, 薛彬, 等. 嫦娥一号卫星CCD 立体相机影像超分辨率重建算法[J]. 红外与激光工程, 2012, 41(2): 404-408.
[5]
[6] Zhang Jihua, Menq Chia-Hsiang. A linear/angular interferometer capable of measuring large angular motion[J]. Meas Sci Technol, 1999, 10(12): 1247-1253.
[7]
[8] Menq Chia-Hsiang, Zhang Jihua, Shi Jian. Design and development of an interferometer with improved angular tolerance and its application to x-y theta measurement[J]. Rev Sci Instrum, 2000, 71(12): 4633-4638.
[9]
[10] Jong-Ahn Kim. Design methods for six-degree-of-freedom displacement measurement systems using cooperative targets [J]. Precision Engineering, 2002, 26(1): 99-104.
[11]
[12] Miller J M, Barton R O. Multi-axis alignment apparatus:US, 4804270[P]. 1989-02-14.
[13] Liu Yongdong, Wang Jia, Liang Jinwen. Dynamic target pose measurement by laser tracking[J]. Laser Infrared, 1999, 29(6): 148-150. (in Chinese) 刘永东, 王佳, 梁晋文. 动态目标全姿态激光跟踪测量[J].激光与红外, 1999, 29(6): 148-150.
[14]
[15]
[16] Kenta Umetsu, Ryosyu Furutnani, Sonko Osawa, et al. Geometric calibration of a coordinate measuring machine using a laser tracking system[J]. Meas Sci Technol, 2005,16(12): 2466-2472.
[17] Sharon S W, James I C, Kevin J S, et al. Optical position measurement for a large gap magnetic suspension system[C]//SPIE, 1991, 37: 163-182.
[18]
[19] Ruan Xiaodong, Li Shilun, Zhuge Liang, et al. Study on the pose measurement of multi-degree-freedom mechanisms with stereovision[J]. China Mechanical Engineering, 2000, 11(5): 571-573. (in Chinese) 阮晓东, 李世伦, 诸葛良, 等. 用立体视觉测量多自由度机械装置姿态的研究[J]. 中国机械工程, 2000, 11(5): 571-573.
[20]
[21]
[22] Kuang Cuifang, Feng Qibo, Zhang Bin, et al. A four- degree-of-freedom laser measurement system( FDMS) using a single-mode fiber-coupled laser module[J]. Sensors and Actuators A, 2005, 125(1): 100-108.
[23]
[24] Ni J, Wu S M. An on-line measurement technique for machine volumetric error compensation[J]. ASME Trans Journal of Engineering for Industry, 1993, 115: 85-92.
[25] Fan Kuangzhao, Chen Mujung. A 6-degree-of-freedom measurement system for the accuracy of X-Y stage[J]. Precision Engineering, 2000, 24(1): 15-23.
[26]
[27]
[28] Vann Charles S. Six degrees of freedom sensor: US, 5883803[P]. 1999-03-16.
[29] Lv Yong, Sun Peng, Liu Lishuang, et al. A roll angle measurement method based on dual CCDs[J]. Optical Technique, 2013, 39(5): 478-479. (in Chinese) 吕勇, 孙鹏, 刘力双, 等. 基于双CCD的滚转角测量方法研究[J]. 光学技术, 2013, 39(5): 478-479.