[1] Bello Uard Y, Clavel Llavel L R. Shape memory alloy flexures [J]. Materials Science and Engineering, 2004, 378: 210-215.
[2]
[3]
[4] Hopkins J B, Culpepper M L. Synthesis of precision serial flexure systems using freedom and constraint topologies (FACT)[J]. Precision Engineering, 2011, 35: 638-649.
[5] Salisbury S P, Mard R B. Analytical stiffness estimation for short flexures[J]. Mechatronics, 2006,16: 399-403.
[6]
[7]
[8] Hale L, Klingmann J, Markle D. New photolithography steeping machine [R]. Livermore: Lawrence Livermore National Laboratory, 1995.
[9]
[10] Hale L C. Principles and techniques for designing precision machines[D]. Boston: Massachusetts Institute of Technology, 1999.
[11] Awtar S, SEN S. A generalized constraint model for twodimensional beam flexures: nonlinear load-displacement formulation [J]. Journal of Mechanical Design, 2010, 132: 1-11.
[12]
[13]
[14] Eun J H, Kyung S M, Shin H S, et al. Optimal design of a flexure-hinge precision stage with a lever [J]. Journal of Mechanical Science and Technology, 2007, 21: 616-623.
[15] Liu Hua, Liu Weiqi, Feng Rui, et al. Design of flexible-supporting mechanism with double compensation rods for moving mirror [J]. Optics and Precision Engineering, 2011, 19(6): 1313-1319.(in Chinese) 柳华,刘伟奇,冯睿,等. 柔性双补偿杆式动镜支撑机构的 设计[J]. 光学精密工程,2011,19(6):1313-1319.
[16]
[17]
[18] Li Haixing, Ding Yalin, Hui Shouwen, et al. Design of compliance factor experiment setup for single-axis flexure hinge [J]. Optics and Precision Engineering, 2011, 19(7): 1552-1559. (in Chinese) 李海星,丁亚林,惠守文,等. 单轴柔性铰链柔度系数试验 装置的设计[J].光学精密工程,2011,19(7):1552-1559.
[19]
[20] Pampiona T, Rossin Ch, MartinA L, et al. Three bipods slicer prototype: Tests and finite element calculations [C]//SPIE, 2008, 7018: 1-11.
[21]
[22] Hale L C, Taylor J S. Experiences with opto-mechanical systems that affect optical surfaces at the sub-nanometer level[R]. Livermore: Lawrence Livermore National Laboratory, 2008.
[23] Tapos F M, Edinger D J, Hilby T R, et al. High bandwidth fast steering mirror[C]//SPIE, 2005, 5877: 1-14.
[24]
[25] Chu C B, Li Y C, Chai W Y, et al. Design of bipod flexures for space mirror[C]//SPIE, 2011, 8196: 1-11.
[26]
[27]
[28] Li Zhilai, Xu Hong. Design of rectangular space mirror and its support structure [J]. Optics and Precision Engineering, 2011,19(5):1039-1047.(in Chinese) 李志来,徐宏. 长条形空间反射镜及其支撑结构设计[J]. 光学精密工程,2011,19(5):1039-1047.
[29] Xin Hongwei, Yang Jinsong, Gao Minghui, et al. Support design for secondary mirror of high resolution space telescope [J]. Infrared and Laser Engineering, 2011, 40(9): 1724-1729.(in Chinese) 辛宏伟,杨近松,高明辉,等. 高分辨力空间遥感器次镜支 撑设计[J].红外与激光工程,2011,40(9):1724-1729.
[30]
[31]
[32] Wang Ping, Zhang Guoyu, Gao Yujun, et al. Optics and machine design of visible light and infrared dual spectral aerial reconnaissance camera [J]. Journal of Mechanical Engineering, 2012, 48(14):11-16.(in Chinese) 王平,张国玉,高玉军,等. 可见与红外双波段航空侦察相 机光机设计[J].机械工程学报,2012,48(14):11-16.
[33]
[34] Young W C,Budtnas R G. Roark's Formulas for Stress and Strain-7th Edition [M]. New York: McGraw-Hill Book Company, 2002.
[35]
[36] Budtnas R G. Advanced Strength and Applied Stress Analysis[M]. New York: McGraw-Hill Book Company, 1977.