激光清洗监测技术研究进展（特邀）

李悦; 吴卓颐; 储德谱; 杨火木; 邓国亮; 周寿桓; 李悦; 吴卓颐; 储德谱; 杨火木; 邓国亮; 周寿桓

doi:10.3788/IRLA20220784

[1]

Song Feng, Liu Shujing, Yan Boxia. Laser cleaning [J]. Cleaning World, 2004, 20(5): 43-48, 60. (in Chinese) doi: 10.3969/j.issn.1671-8909.2004.05.010

[2]

Tian Bin, Zou Wanfang, He Zhen, et al. Paint removal experiment with pulsed Nd: YAG laser [J]. Cleaning World, 2007, 23(10): 1-5. (in Chinese) doi: 10.3969/j.issn.1671-8909.2007.10.001

[3]

Zhu G, Xu Z, Jin Y, et al. Mechanism and application of laser cleaning: A review [J]. Optics and Lasers in Engineering, 2022, 157: 107130. doi: 10.1016/j.optlaseng.2022.107130

[4]

宋峰. 激光清洗技术与应用[M]//: 清华大学出版社, 2021

Song Feng. Laser Cleaning and its Applications [M]. Beijing: Tsinghua University Press, 2021. (in Chinese)

[5]

Lee J M, Watkins K G. In-process monitoring techniques for laser cleaning [J]. Optics and Lasers in Engineering, 2000, 34(4-6): 429-442. doi: 10.1016/S0143-8166(00)00073-7

[6]

Watkins K G, Chen X, Fujioka T, et al. Mechanisms of laser cleaning [C]//Proceedings of SPIE, 2000, 3888: 165-174.

[7]

Ding Ye, Xue Yao, Pang Jihong, et al. Advances in in-situ monitoring technology for laser processing [J]. Sci Sin-Phys Mech Astron, 2019, 49(4): 56-74. (in Chinese)

[8]

Duan Chenghong, Chen Xiaokui, Luo Xiangpeng. Application prospect of laser cleaning in petrochemical field [J]. Opto-Electronic Engineering, 2020, 47(11): 3-15. (in Chinese)

[9]

Tserevelakis G J, Vrouvaki I, Siozos P, et al. Photoacoustic imaging reveals hidden underdrawings in paintings [J]. Scientific Reports, 2017, 7(1): 1-11. doi: 10.1038/s41598-016-0028-x

[10]

Brygo F, Dutouquet C, Le Guern F, et al. Laser fluence, repetition rate and pulse duration effects on paint ablation [J]. Applied Surface Science, 2006, 252(6): 2131-2138. doi: 10.1016/j.apsusc.2005.02.143

[11]

Chen Yun, Huang Haipeng, Ye Shaowei. Research on acoustic monitoring technology of laser paint removal process [J]. Applied Laser, 2020(6): 1153-1159. (in Chinese) doi: 10.14128/j.cnki.al.20204006.1153

[12]

Palanco S, Laserna J. Spectral analysis of the acoustic emission of laser-produced plasmas [J]. Applied Optics, 2003, 42(30): 6078-6084. doi: 10.1364/AO.42.006078

[13]

Tserevelakis G J, Pozo-antonio J S, Siozos P, et al. On-line photoacoustic monitoring of laser cleaning on stone: Evaluation of cleaning effectiveness and detection of potential damage to the substrate [J]. Journal of Cultural Heritage, 2019, 35: 108-115. doi: 10.1016/j.culher.2018.05.014

[14]

Duley W, Mao Y. The effect of surface condition on acoustic emission during welding of aluminium with CO₂ laser radiation [J]. Journal of Physics D: Applied Physics, 1994, 27(7): 1379. doi: 10.1088/0022-3727/27/7/007

[15]

Cooper M, Emmony D, Larson J. Characterization of laser cleaning of limestone [J]. Optics & Laser Technology, 1995, 27(1): 69-73.

[16]

Lu Y, Lee Y, Hong M, et al. Acoustic wave monitoring of cleaning and ablation during excimer laser interaction with copper surfaces [J]. Applied Surface Science, 1997, 119(1-2): 137-146. doi: 10.1016/S0169-4332(97)00188-8

[17]

Xu Jun, Sun Zhenyong, Zhou Wenming, et al. Real-time monitoring technigue for laser cleaning rust deposite [J]. Acta Photonica Sinica, 2002(9): 1090-1092. (in Chinese)

[18]

Tong Y, Shen Q, Cao M, et al. Acoustic monitoring during rust removal by dry laser cleaning [J]. International Journal of Nonlinear Science, 2013, 16(3): 225-229.

[19]

Villarreal-villela A E, Cabrera L P. Monitoring the laser ablation process of paint layers by PILA technique [J]. Open Journal of Applied Sciences, 2016, 6(9): 626-635. doi: 10.4236/ojapps.2016.69060

[20]

Chen Y, Deng G L, Zhou Q, et al. Acoustic signal monitoring in laser paint cleaning [J]. Laser Physics, 2020, 30(6): 066001. doi: 10.1088/1555-6611/ab85c7

[21]

Zou W, Song F, Luo Y. Characteristics of audible acoustic signal in the process of laser cleaning of paint on metal surface [J]. Optics & Laser Technology, 2021, 144(3): 107388.

[22]

Hu Guoqing, Guan Yingchun. Research progress of spectral measurement on the on-line monitoring of laser processing [J]. Spectroscopy and Spectral Analysis, 2021, 41(8): 2343-2356. (in Chinese)

[23]

Anabitarte F, Cobo A, Lopez Higuera J M. Laser-induced breakdown spectroscopy: Fundamentals, applications, and challenges [J]. ISRN Spectroscopy, 2012, 2012: 1-12.

[24]

李伟. 激光清洗锈蚀的机制研究和设备开发[D]. 南开大学, 2014.

Li Wei. Research on mechanisms of laser rust removal and manufacture of laser cleaning devices[D]. Nankai: Nankai University, 2014. (in Chinese)

[25]

Rakovský J, Čermák P, Musset O, et al. A review of the development of portable laser induced breakdown spectroscopy and its applications [J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 2014, 101: 269-287. doi: 10.1016/j.sab.2014.09.015

[26]

钱自然. 基于LIBS技术的激光可控除漆在线监测与反馈研究[D]. 中国民用航空飞行学院, 2022.

Qian Z R. Study on online monitoring and feedback of laser-based controlled paint removal through LIBS technology[D]. Guanghan: Civil Aviation Flight University of China, 2022. (in Chinese)

[27]

Gobernado-Mitre I, Prieto A C, Zafiropulos V, et al. On-line monitoring of laser cleaning of limestone by laser-induced breakdown spectroscopy and laser-induced fluorescence [J]. Applied Spectroscopy, 1997, 51(8): 1125-1129. doi: 10.1366/0003702971941944

[28]

Klein S, Hildenhagen J, Dickmann K, et al. LIBS-spectroscopy for monitoring and control of the laser cleaning process of stone and medieval glass [J]. Journal of Cultural Heritage, 2000, 1(2): S287-S292.

[29]

Majewski M S, Kelley C, Hassan W, et al. Laser induced breakdown spectroscopy for contamination removal on engine-run thermal barrier coatings [J]. Surface & Coatings Technology, 2011, 205(19): 4614-4619.

[30]

Tong Yanqun, Zhang Yongkang, Yao Hongbing, et al. Real-time monitoring system for laser derusting based on plasma intensity [J]. Chinese Journal of Lasers, 2011, 38(10): 1003009. (in Chinese)

[31]

Yao Hongbing, Yu Wenlong, Li Yaru, et al. Analysis of laser cleaning of iron in air based on characteristics of plasma spectra [J]. Acta Photonica Sinica, 2013, 42(11): 1295-1299. (in Chinese) doi: 10.3788/gzxb20134211.1295

[32]

Chen Kangxi, Feng Guoying, Deng Guoliang, et al. Study on the mechanism of laser paint removal based on emission spectrum and composition analysis [J]. Spectroscopy and Spectral Analysis, 2016, 36(9): 2956-2960. (in Chinese)

[33]

Jasim H A, Demir A G, Previtali B, et al. Process development and monitoring in stripping of a highly transparent polymeric paint with ns-pulsed fiber laser [J]. Optics & Laser Technology, 2017, 93: 60-66.

[34]

Sun Lanxiang, Wang Wenju, Qi Lifeng, et al. Online monitoring of laser cleaning effect of carbon fiber composite materials based on laser-Induced breakdown spectroscopy technology [J]. Chinese Journal of Lasers, 2020, 47(11): 1111003. (in Chinese) doi: 10.3788/CJL202047.1111003

[35]

Tong Yanqun, Lu Qinhui, Zhou Jianzhong, et al. On-line plasma spectrum detection of laser cleaning of aluminum alloy before welding [J]. Spectroscopy and Spectral Analysis, 2020, 40(1): 255-260. (in Chinese)

[36]

Yang Wenfeng, Qian Ziran, Cao Yu, et al. LIBS monitoring and analysis of laser-based layered controlled paint removal from aircraft skin [J]. Journal of Spectroscopy, 2021, 2021(17): 4614388. doi: 10.1155/2021/4614388

[37]

Singh J P, Thakur S N. Laser-Induced Breakdown Spectroscopy [M]. Amsterdam: Elsevier, 2020.

[38]

Li Xiangyu, Wang Shigong, Ye Mingguo, et al. The time resolved laser induced breakdown spectroscopy system based on PMT [J]. Instrumentation Technology, 2018(6): 26-29. (in Chinese)

[39]

Guo Qianjin, Yu Haibin, Xing Yong, et al. Experimental study on high alloy steel sample by laser-induced breakdown spectroscopy [J]. Spectroscopy and Spectral Analysis, 2010, 30(3): 783-787. (in Chinese) doi: 10.3964/j.issn.1000-0593(2010)03-0783-05

[40]

Cadwell L, Belliveau J, Huwell L, et al. LIBS vs TRELIBS-The relative merits of laser-induced breakdown spectroscopy versus time resolved laser-induced breakdown spectroscopy [C]//SPIE, 1986, 644: 16-19.

[41]

Chen Lin, Deng Guoliang, Feng Guoying, et al. Study on the mechanism of laser paint removal based on LIBS and time resolved characteristic signal [J]. Spectroscopy and Spectral Analysis, 2018, 38(2): 367-371. (in Chinese)

[42]

Zhou Q, Deng G, Chen Y, et al. Laser paint removal monitoring based on time-resolved spectroscopy [J]. Applied Optics, 2019, 58(34): 9421-9425. doi: 10.1364/AO.58.009421

[43]

Dietz N, Sukidi N, Harris C, et al. Real-time monitoring of surface processes by p-polarized reflectance [J]. Journal of Vacuum Science & Technology A, 1997, 15(3): 807-815.

[44]

Lee J M, Watkins K G, Steen W M. Real-time monitoring and expert control of laser cleaning [C]//ICALEO® 2000: Proceedings of the Laser Materials Processing Conference, 2000.

[45]

Whitehead D J, Crouse P L, Schmidt M J J, et al. Monitoring laser cleaning of titanium alloys by probe beam reflection and emission spectroscopy [J]. Applied Physics A, 2008, 93(1): 123-127. doi: 10.1007/s00339-008-4643-7

[46]

Marimuthu S, Kamara A M, Whitehead D, et al. Laser removal of TiN coatings from WC micro-tools and in-process monitoring [J]. Optics & Laser Technology, 2010, 42(8): 1233-1239.

[47]

Moretti P, Iwanicka M, Melessanaki K, et al. Laser cleaning of paintings: in situ optimization of operative parameters through non-invasive assessment by optical coherence tomography (OCT), reflection FT-IR spectroscopy and laser induced fluorescence spectroscopy (LIF) [J]. Heritage Science, 2019, 7(1): 1-12. doi: 10.1186/s40494-018-0244-8

[48]

Song Y, Hu G, Zhang Z, et al. Real-time spectral response guided smart femtosecond laser bone drilling [J]. Optics and Lasers in Engineering, 2020, 128(3): 106017.

[49]

Allen F I, Kim E, Andresen N C, et al. In situ TEM raman spectroscopy and laser-based materials modification [J]. Ultramicroscopy, 2016, 178: 33-37.

[50]

Papadakis V, Loukaiti A, Pouli P. A spectral imaging methodology for determining on-line the optimum cleaning level of stonework [J]. Journal of Cultural Heritage, 2010, 11(3): 325-328. doi: 10.1016/j.culher.2009.10.007

[51]

俞鸿斌. 金属表面激光清洗技术研究[D]. 华中科技大学, 2015.

Yu Hongbin. Laser cleaning technology research on metal surface[D]. Wuhan: Huazhong University of Science & Technology, 2015. (in Chinese)

[52]

Liang H. Advances in multispectral and hyperspectral imaging for archaeology and art conservation [J]. Applied Physics A, 2012, 106(2): 309-323. doi: 10.1007/s00339-011-6689-1

[53]

Fischer C, Kakoulli I. Multispectral and hyperspectral imaging technologies in conservation: current research and potential applications [J]. Studies in Conservation, 2006, 51(S1): 3-16. doi: 10.1179/sic.2006.51.Supplement-1.3

[54]

Cucci C, Casini A. Hyperspectral Imaging for Artworks Investigation [M]//Data Handling in Science and Technology. Amsterdam: Elsevier, 2020: 583-604.

[55]

Ramil A, Vázquez-Nion D, Pozo-Antonio J S, et al. Using hyperspectral imaging to quantify phototrophic biofilms on granite [J]. Journal of Environmental Informatics, 2020, 35(1): 34-44.

[56]

Cucci C, De Pascale O, Senesi G S. Assessing laser cleaning of a limestone monument by fiber optics reflectance spectroscopy (FORS) and visible and near-Infrared (VNIR) hyperspectral imaging (HSI) [J]. Minerals, 2020, 10(12): 1052. doi: 10.3390/min10121052

[57]

Striova J, Fontana R, Barucci M, et al. Optical devices provide unprecedented insights into the laser cleaning of calcium oxalate layers [J]. Microchemical Journal, 2016, 124: 331-337. doi: 10.1016/j.microc.2015.09.005

[58]

Shi Tianyi, Zhou Longzao, Wang Chunming, et al. Machine vision-based real-time monitor system for laser cleaning aluminum alloy [J]. Chinese Journal of Lasers, 2019, 46(4): 0402007. (in Chinese) doi: 10.3788/CJL201946.0402007

[59]

Zhang Mengqiao, Dai Huixin, Zheng Yunhao, et al. Research on laser cleaning detection of train paint coating based on color conversion [J]. Applied Laser, 2020, 40(4): 644-648. (in Chinese)

[60]

Li J C, Liu H T, Shi L M, et al. Imaging feature analysis-based intelligent laser cleaning using metal color difference and dynamic weight dispatch corrosion texture [J]. Photonics, 2020, 7(4): 130. doi: 10.3390/photonics7040130

[61]

Liu Weijun, Tian Zeqi, Bian Hongyou, et al. Laser cleaning detection method for rust layer of steel based on machine vision [J]. Applied Laser, 2021, 41(6): 1287-1292. (in Chinese)

[62]

刘金聪, 王明娣, 潘煜, 等. 一种激光清洗设备的清洗路径自动监测方法: 中国, CN201910437542.8[P]. 2019-05-24.

[63]

Sun B, Xu C, He J, et al. Cleanliness prediction of rusty iron in laser cleaning using convolutional neural networks [J]. Applied Physics A: Materials Science & Processing, 2020, 126(11): 949-957.

[64]

Papanikolaou A, Tserevelakis G J, Melessanaki K, et al. Development of a hybrid photoacoustic and optical monitoring system for the study of laser ablation processes upon the removal of encrustation from stonework [J]. Opto-Electronic Advances, 2020, 3(2): 2190037. doi: 10.29026/oea.2020.190037

[65]

Zha Rongwei, Yu Lidong, Li Ben, et al. Laser cleaning process monitoring of metal surface based on image processing and LIPS analysis [J]. Acta Photonica Sinica, 2021, 50(7): 0714001. (in Chinese) doi: 10.3788/gzxb20215007.0714001