[1]
[2] Castrellon Uribe J. Experimental results of the performance of a laser fiber as a remote sensor of temperature [J]. Optics and Lasers in Engineering, 2005, 43(6): 633-644.
[3] Fang Qianqian, Fang Wei, Wang Kai. Calculation of effective emissivity of blackbody cavities by Monte-Carlo method[J]. Chinese Optics, 2012, 5(2): 167-173. (in Chinese)
[4]
[5]
[6] Zhang Hua, Liu Wei, Xie Zhi, et al. Finite element analysis of thermometric sensor for liquid steel[J]. Journal of Northeastern University, 2006, (12): 1315-1318. (in Chinese)
[7]
[8] Xiao Peng, Sun Xiaogang, Dai Jingmin. Temperature and spectral emissivity measurement of the metallic thermal protection blanket based on multi-wavelength thermometry[J]. Opto-Electronic Engineering, 2007, 34(8): 59-63. (in Chinese)
[9] Dai Jingmin, Song Yang, Wang Zongwei. Review of spectral emissivity measurement[J]. Infrared and Laser Engineering, 2009, 38(4): 710-715. (in Chinese)
[10]
[11] Wang Qiang, Zhang Hong, Zhang Wei, et al. Radiant characteristics evaluation and structural parameter optimization design of V-grooved surface blackbody[J]. Journal of Tianjin University(Science and Technology), 2013, 46(5): 463-468. (in Chinese)
[12]
[13]
[14] Wang Qiang, Zhang Wei, Dai Jingmin, et al. Temperature uniformity optimum design and performance evaluation of surface blackbody radiant source with cavity effect[J]. Journal of Harbin institute of Technology, 2013, 45(5): 18-24. (in Chinese)
[15]
[16] Liu Renxue, Wang Lei. ANSYS method on cavity emissivity[J]. Measurement Technique, 2008(4): 6-8.
[17] Zheng Longjiang, Chang Lei, Zhao Jing, et al. Finite element analysis of high-temperature blackbody cavity emissivity[J]. Infrared and Laser Engineering, 2011, 40(9): 1640-1645. (in Chinese)