[1] Heywood J B. Internal Combustion Engine Fundamentals, McGraw-hill College[M]. US:New York University, 1988:457-458.
[2] Rudloff J, Zaccardi J M, Richard S, et al. Analysis of pre-ignition in highly charged SI:emphasis on the auto-ignition mode[J]. Proc Combust Inst, 2013, 34:2959-2967.
[3] Pan J, Shu G, Wei H. Interaction of flame propagation and pressure waves during knocking combustion in spark-ignition engines[J]. Combustion Science and Technology, 2014, 186:192-209.
[4] Kawahara N, Tomita E, Sakata Y. Auto-ignited kernels during knocking combustion in a spark-ignition engine[J]. Proceedings Combustion Institute, 2007, 31:2999-3006.
[5] Dahnz C, Spicher U. Irregular combustion in supercharged spark ignition engines-pre-ignition and other phenomena[J]. Intemational Journal of Engine Research, 2010, 11:485-498.
[6] Bychkov V, Valiev D, Eriksson L E. Physical mechanism of ultrafast flame acceleration[J]. Phys Rev Lett, 2008, 101:164501.
[7] Ciccarelli G, Johansen C T, Parravani M. The role of shock-flame interactions on flame acceleration in an obstacle laden channel[J]. Combust Flame, 2010, 157:2125-2136.
[8] Pinos T, Ciccarelli G. Combustion wave propagation through a bank of cross-flow cylinders[J]. Combust Flame, 2015, 162:3254-3262.
[9] Liberman M A, Ivanov M F, Kiverin A D, et al. Deflagration-to-detonation transition in highly reactive combustible mixtures[J]. Acta Astronaut, 2010, 67:688-701.
[10] Liberman M A, Kuznetsov M, Ivanov A, et al. Formation of the preheated zone ahead of a propagating flame and the mechanism underlying the deflagration-to-detonation transition[J]. Phys Lett, 2009, 373:501-510.
[11] Xiao H, Wang Q, Shen X, et al. An experimental study of distorted tulip flame formation in a closed duct[J]. Combust Flame, 2013, 160:1725-1728.
[12] Wei H, Gao D, Zhou L, et al. Experimental observations of turbulent flame propagation effected by flame acceleration in the end gas of closed combustion chamber[J]. Fuel, 2016, 180:157-163.
[13] Wei H, Gao G, Zhou L, et al. Experimental analysis on spray development of 2-methylfuran-gasoline blends using multi-hole DI injector[J]. Fuel, 2016, 164:245-253.