[1] |
|
[2] |
Zhang Zhiyong, Zhou Xiaoyao, Fan Dapeng, et al. Design and analysis of control system for seeker servo mechanism[J]. Infrared and Laser Engineering, 2012, 41(2): 494-499. (in Chinese)张智永, 周晓尧, 范大鹏, 等. 导引头伺服机构的控制系统分析与设计[J]. 红外与激光工程, 2012, 41(2): 494-499. |
[3] |
|
[4] |
Zhu Mingchao, Wang Tao, Jia Hongguang. Seeker kinematic analysis and calibration based on POE formula[J]. Infrared and Laser Engineering, 2011, 40(8): 1556-1562. (in Chinese)朱明超, 王涛, 贾宏光. 基于指数积公式的导引头运动学分析与标定[J]. 红外与激光工程, 2011, 40(8): 1556-1562. |
[5] |
|
[6] |
Zhu Huazheng, Fan Dapeng, Ma Dongxi, et al. Disturbance isolation index of seeker servo system and its test[J]. Optics and Precision Engineering, 2009, 17(8): 1993-1998. (in Chinese)朱华征, 范大鹏, 马东玺, 等. 导引头伺服系统隔离度与测试[J]. 光学 精密工程, 2009, 17(8): 1993-1998. |
[7] |
|
[8] |
Lin Chunliang, Hsiao Yihsing. Adaptive feedforward control for disturbance torque rejection in seeker stabilizing loop[J]. IEEE, 2001, 9(1): 108-121. |
[9] |
|
[10] |
Cui Yingying, Xia Qunli, Qi Zaikang. Seeker platform disturbance rejection mathematical model[J]. Journal of Projectiles, Rockets Missiles and Guidance, 2006, 26(1): 22-25. (in Chinese)崔莹莹, 夏群力, 祁载康. 导引头稳定平台隔离度模型研究[J]. 弹箭与制导学报, 2006, 26(1): 22-25. |
[11] |
Zhao Chao. Study on disturbance rejection rate of a seeker servo system[J]. Electronics Optics Control, 2008, 15(7):78-82. (in Chinese)赵超. 导引头稳定系统隔离度研究[J]. 电光与控制, 2008, 15(7): 78-82. |
[12] |
|
[13] |
Phyo San, Ren Beibei, Sam Shuzhi, et al. Adaptive neural network control of hard disk drives with hysteresis friction nonlinearity[J]. IEEE Transations on Control Systems Technology, 2011, 19(2): 351-358. |
[14] |
|
[15] |
Tong Heng Lee, Kok K T, Sunan Huang. Adaptive friction compensation with a dynamical friction model[J]. IEEE, 2011, 16(1): 133-140. |
[16] |
|
[17] |
Xiang Hongbiao, Qiu Zurong, Li Xingfei, et al. Nonlinear friction modeling and compensation of high-precision experimental platforms[J]. Optics and Precision Engineering, 2010, 18(5): 1119-1127. (in Chinese) 向红标, 裘祖荣, 李醒飞, 等, 精密实验平台的非线性摩擦建模与补偿[J]. 光学 精密工程, 2010, 18(5): 1119-1127. |