| [1] | Ye Xiaowen, Ding Tao, Cheng Xinbin, et al. Contrastive investigation of the residual stress of SiO2 films prepared by electron beam evaporation in different relative humidity environments[J]. Infrared and Laser Engineering, 2012, 41(3):713-717. (in Chinese) |
| [2] | Xiong Shengming, Zhang Yundong, Tang Jinfa. Dielectric coating for deformable mirrors used in COIL laser system[J]. High Power Laser Particle Beams, 2000, 12(1):1175-1180. (in Chinese) |
| [3] | Zhu Changchun, Zhao Hongpo, Han Jianqiang, et al. The residual stresses in MEMS thin films[J]. Micronanoelectronic Technology, 2003, 40(10):30-34. (in Chinese) |
| [4] | Miao Xinxiang, Yuan Xiaodong, Cheng Xiaofeng, et al. Thermal stress simulation of laser induced damage of fused silica by contamination on the surface[J]. Laser Technology, 2011, 35(2):285-288. (in Chinese) |
| [5] | Liu Zheng. Fatigue properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy produced by laser melting deposition[D]. Dalian:Dalian Jiaotong University, 2014. (in Chinese) |
| [6] | Kanchanomai C, Limtrakarn W. Effect of residual stress on fatigue failure of carbonitrided low-carbon steel[J]. Journal of Materials Engineering Performance, 2008, 17(6):879-887. |
| [7] | Luo Shuai, Chen Lixia, Zhang Bin. Influence of structural parameters of deformable mirror on its fatigue life[J]. Acta Optica Sinica, 2017, 37(10):18-26. (in Chinese) |
| [8] | Gao Chunxue. Study of the distribution and control of stress in optical thin films[D]. Nanjing:Southeast University, 2015. (in Chinese) |
| [9] | Chen Lixia, Hu Xiaochuan, Zhang Bin, et al. Fatigue damage characteristics of deformable mirrors for wavefront correction[J]. Chinese Journal of Lasers, 2016, 43(11):1105002. (in Chinese) |
| [10] | Liu Yan, Jie Meng, Xie Haifeng, et al. Fatigue life of piezoelectric actuator used in resonance-type air pump[J]. Optics and Precision Engineering, 2013, 21(4):941-947. (in Chinese) |
| [11] | Wu Hao, Meng Yonggang, Su Caijun, et al. An out-chip method for measuring fatigue property of poly silicon thin film[J]. Journal of Harbin Institute of Technology, 2006, 38(4):96-98+160. (in Chinese) |
| [12] | Liu Guangtong. Atmospheric dust fall source analysis in hohhot[D]. Hohhot:Inner Mongolia University, 2008. (in Chinese) |
| [13] | Hu Xiaochuan, Peng Jiaqi, Zhang Bin. Thermal distortion of deformable mirror and its influence on beam quality[J]. Chinese Journal of Lasers, 2015, 42(1):0120004. (in Chinese) |
| [14] | Li X D, Wang X N, Xiong Q H, et al. Mechanical properties of ZnS nanobelts[J]. Nano Letters, 2005, 5(10):1982-1986. |
| [15] | Wu Weibin, Dai Yifan, Guan Chaoliang, et al. Optimization design for transversal piezoelectric effect deformable mirror[J]. Infrared and Laser Engineering, 2016, 45(8):0818003. (in Chinese) |
| [16] | Peng Jiaqi, Hu Xiaochuan, Chen Lixia, et al. Effect of structural parameters of deformable mirrors on phase characteristics of high-power laser[J]. Acta Optica Sinica, 2015, 35(5):0514001. (in Chinese) |
| [17] | Zhang Yaoping. The study on infrared thin film of deformable mirror[D]. Chengdu:Institute of Optics and Electronics, Chinese Academy of Sciences, 2006. (in Chinese) |