[1] Gong Haimei, Liu Dafu. Development and trends in spaceborneinfrared detectors[J]. Infrared and Laser Engineering, 2008, 37(1): 18-24. (in Chinese)
[2]
[3] 龚海梅, 刘大福. 航天红外探测器的发展现状与进展[J]. 红外与激光工程, 2008, 37(1): 18-24.
[4] Wang Limin, Zhang Rui, Lin Yinan, et al. Application in the military of the IR detection technology[J]. Infrared and Laser Engineering, 2008, 37(S): 225-229. (in Chinese)
[5]
[6] Yu Jingjun, Pei Xu, Bi Shusheng, et al. State-of-arts of design method for flexure mechanisms[J]. Journal of Mechanical Engineering, 2010, 46(13): 2-9. (in Chinese)
[7]
[8] He Jun, Wang Qing, Chen Lei. Alignment of twyman-green infared phase-shifting interferometer[J]. Infrared and Laser Engineering, 2008, 37(3): 145-149. (in Chinese)
[9] Xia Zunfeng, Xu Yan. Analysis on degree of freedom of flexible components and flexible mechanisms[J]. Journal of Machine Design, 2009, 26(4): 51-53. (in Chinese)
[10] 王力民, 张蕊, 林一楠, 等. 红外探测器在军事上的应用[J]. 红外与激光工程, 2008, 37(S): 225-229.
[11] Chen Guimin, Li Duanling. Degree of freedom of planar compliant mechanisms[J]. Journal of Mechanical Engineering, 2010, 46(13): 48-52. (in Chinese)
[12]
[13]
[14] Li Yuan, Zhang Weiming, Zhang Zhijing, et al. Nonlinearity analysis of three typical flexure hinges[J]. Manufacturing Informationalization, 2007, (5): 23-26. (in Chinese)
[15] Zuo Xingyong, Liu Xiaoming. Calculation and analysis of rotational stiffness for three types of flexure hings[J]. Chinese Journal of Scientific Instrument, 2006, 27(12): 17-25. (in Chinese)
[16] 于靖军, 裴旭, 毕树生, 等. 柔性铰链机构设计方法的研究进展[J]. 机械工程学报, 2010, 46(13): 2-9.
[17]
[18] Zhang Xingyong, Yuan Weizheng, Xiong Benyan. A new flexible mechanism design method based on fexible cantilever beam[J]. Aviation Precision Manufacturing Technology, 2005, (10): 630-635. (in Chinese)
[19] Lin Xuesong, Wang Shurong, Li Futian. Design and investigation of the precision scans structure of space infrared FTS[J]. Optics and Precision Engineering, 2005, 13(6): 691-696. (in Chinese)
[20]
[21] 贺俊, 王青, 陈磊. 移相式泰曼-格林红外干涉仪调试技术[J]. 红外与激光工程, 2008, 37(3): 145-149.
[22]
[23]
[24] 夏尊凤, 许焰. 柔性构件和柔性机构自由度分析[J]. 机械设计, 2009, 26(4): 51-53.
[25]
[26]
[27] 陈贵敏, 李端玲. 平面柔顺机构的自由度[J]. 机械工程学报, 2010, 46(13): 48-52.
[28]
[29]
[30] 李媛, 张卫民, 张之敬, 等. 三种常见典型柔性铰链的非线性分析[J]. 制造业信息化, 2007, (5): 23-26.
[31]
[32]
[33] 左行勇, 刘晓明. 三种形状柔性铰链转动刚度的计算与分析[J]. 仪器仪表学报, 2006, 27(12): 17-25.
[34]
[35]
[36] 张兴勇, 苑伟政, 熊本炎. 一种新的基于柔性悬臂梁的柔性机构设计方法[J]. 航空精密制造技术, 2005, (10): 630-635.
[37]
[38]
[39] 林雪松, 王淑容, 李福田. 空间傅立叶变换红外光谱仪用全柔性机构的设计及研究[J]. 光学精密工程, 2005, 13(6): 691-696.