[1]
[2] Cheng Jingquan. Principles of Astronomical Telescope Design[M]. Beijing: China Science Technology Press, 2003: 61-68. (in Chinese) 程景全. 天文望远镜原理和设计[M]. 北京: 中国科学技术 出版社, 2003: 61-68.
[3] Yoder J R, Paul R. Opto-Mechanical Systems Design [M]. New York: Marcel Dekker Inc, 1993: 407-470.
[4]
[5] Bely Pierre Y. The Design and Construction of Large Optical Telescopes [M]. New York: Springer-Verlag Inc, 2003: 219-223.
[6]
[7] Wang Huai, Dai Shuang, Zhang Jingxu. Azimuth shafting bearing sturcture in a large Alt-azimuth telescope [J] . Opt Precision Engineering, 2012, 20(7): 1509-1516. (in Chinese) 王槐, 代霜, 张景旭. 大型地平式望远镜的方位轴系支撑 结构[J]. 光学精密工程, 2012, 20(7): 1509-1516.
[8]
[9] Xu Liang, Zhao Jianke, Xue Xun. Detectability of lunar-based optical telescope on ground [J]. Opt Precision Engineering, 2012, 20(5): 972-978. (in Chinese) 徐亮, 赵建科, 薛勋. 月基望远镜探测能力得地面标定[J]. 光学精密工程, 2012, 20(5): 972-978.
[10]
[11] Zhang Dongge, Zhou Renshan, Li Yaobin. Surrogate models based optimization methods for the axial support points of the primary mirror [J]. Infrared and Laser Engineering, 2012, 31(1): 409-414. (in Chinese) 张东阁, 卓仁善, 李耀彬. 反射镜轴向支撑位置优化得代 理模型方法[J]. 红外与激光工程, 2012, 41(2): 409-414.
[12]
[13] Fan Lili, Zhang Jingxu, Yang Fei, et al. Impact of the supports of primary mirror in equatorial telescope on its surface deformation [J]. Infrared and Laser Engineering, 2012, 41(1): 173-177. (in Chinese) 范李立, 张景旭, 杨飞, 等. 极轴式望远镜主镜职称结构对 镜面变形影响[J]. 红外与激光工程, 2012, 41(1): 173-177.
[14]
[15] Sun Jingwei. Alignment technique for the large-aperture telescope based on astigmatism [J]. Infrared and Laser Engineering, 2012, 41(2): 427-435. (in Chinese) 孙敬伟. 利用像散分析实现得大口径望远镜装调技术[J]. 红外与激光工程, 2012, 41(2): 427-435.
[16]
[17] Zhang Yuanyuan, Jing Wei, Cheng Yuntao, et al. Design and finite element analysis of 510 mm SiC ultra-lightweight mirror [J] . Opt Precision Engineering, 2012, 20(8): 1718-1724. (in Chinese) 张媛媛, 敬畏, 程云涛, 等. 510 mm SiC 超轻量化反射镜 的设计与有限元分析[J]. 光学精密工程, 2012, 20(8): 1718-1724.
[18]
[19] Wu Xiaoxia, Wang Minghao, Ming Ming, et al. Calibration of thermal distortion for large aperture SiC lightweight mirror[J]. Opt Precision Engineering, 2012, 20 (6): 1243-1249. (in Chinese) 吴小霞, 王鸣浩, 明名, 等. 大口径SiC 轻量化主镜热变形 得定标[J]. 光学精密工程, 2012, 20(6): 1243-1249.
[20]
[21]
[22] Zhang Limin, Zhang Bin, Yang Fei, et al. Design and test of force actuator in active optical system [J]. Opt Precision Engineering, 2012, 20(1): 38-44. (in Chinese) 张丽敏, 张斌, 杨飞, 等. 主动光学系统力促动器得设计和 测试[J]. 光学精密工程, 2012, 20(1): 38-44.
[23]
[24] Gao Jinsong, Shen Zhenfeng, Wang Xiaoyi, et al. Research status quo of SiC space mirror material and its surface modification [J]. Chinese Journal of Optics and Applied Optics, 2009, 2(2): 71-78. (in Chinese) 高劲松, 申振峰, 王笑夷, 等. SiC空间反射镜材料及其表面改 性技术现状分析[J]. 中国光学与应用光学, 2009, 2(2): 71-78.
[25]
[26] Palusinski I A, Ghozeil I. Developing SiC for optical system application[C]//SPIE, 2004, 5524: 14-20.
[27] Tang Yuxia, Zhang Ge. The development of fabrication techniques in large scale light-weighted SiC mirror blank[J]. Opt Tech, 2007, 33(4): 510-518. (in Chinese) 唐裕霞, 张舸. 大口径碳化硅轻质反射镜镜坯制造技术的 研究进展[J]. 光学技术, 2007, 33(4): 510-518.
[28]
[29] Rodolfo J. Polishing, coating and integration of SiC mirror for space telescopes[C]//SPIE, 1995, 2543: 238-247.