[1] James J, Bryant P, Solomon S, et al. OASIS: Cryogenically-optimized resistive Arrays & IRSP subsystems for space-background IR simulation[C]//Technologies for Synthetic Environments: Hardware-in the-Loop Testing XI. Bellingham: SPIE-Int Soc Optical Engineering, 2006: 20812.
[2] McHugh S, Franks G, LaVeigne J. High-temperature MIRAGE XL (LFRA) IRSP system development[C]//Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXVIII. Bellingham: SPIE-Int Soc Optical Engineering, 2017: 10178.
[3] Karayiannis T G, Mahmoud M M. Flow boiling in microchannels: Fundamentals and applications [J]. Applied Thermal Engineering, 2017, 115: 1372-1397. doi:  10.1016/j.applthermaleng.2016.08.063
[4] Back D, Drummond K P, Sinanis M D, et al. Design, fabrication, and characterization of a compact hierarchical manifold microchannel heat sink array for two-phase cooling [J]. IEEE Transactions on Components Packaging and Manufacturing Technology, 2019, 9: 1291-1300. doi:  10.1109/TCPMT.2019.2899648
[5] Smakulski P, Pietrowicz S. A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques [J]. Applied Thermal Engineering, 2016, 104: 636-646. doi:  10.1016/j.applthermaleng.2016.05.096
[6] Wu Z Y, Zhang W, Sun Z Y, et al. Research progress on the flow boiling heat transfer enhancement in the microchannel [J]. Micronanoelectronic Technology, 2019, 56(2): 126-132.
[7] Kuznetsov V V. Fundamental issues related to flow boiling and two-phase flow patterns in microchannels-experimental challenges and opportunities [J]. Heat Transfer Engineering, 2019, 40(9-10): 711-724. doi:  10.1080/01457632.2018.1442291
[8] Leena R, Syamkumar G, Prakash M J. Experimental and numerical analyses of multiple jets impingement cooling for high-power electronics [J]. IEEE Transactions on Components Packaging and Manufacturing Technology, 2018, 8: 210-215. doi:  10.1109/TCPMT.2017.2783629
[9] Wang Jixiang, Li Yunze, Li Jiaxin, et al. A gas-atomized spray cooling system integrated with an ejector loop: Ejector modeling and thermal performance analysis. [J]. Energy Conversion and Management, 2019, 180: 106-118. doi:  10.1016/j.enconman.2018.10.095
[10] Zhang T, Yan K F, Zhang C, et al. Effects of pin-finned array and porous surface on two-phase confined jet-impingement cooling [J]. Chemical Industry and Engineering Progress, 2019, 38(10): 4470-4480. (in Chinese)
[11] Izadi A, Siavashi M, Xiong Qingang. Impingement jet hydrogen, air and Cu-H2O nanofluid cooling of a hot surface covered by porous media with non-uniform input jet velocity [J]. International Journal of Hydrogen Energy, 2019, 44: 15933-15948. doi:  10.1016/j.ijhydene.2018.12.176
[12] Majhool A A A K, Jasim N M. Prediction of the initial drop size and velocity distribution in the cold cryogenic spray [J]. International Journal of Heat and Technology, 2020, 38(3): 629-640. doi:  10.18280/ijht.380307
[13] Lee J, Mudawar I. Low-temperature two-phase microchannel cooling for High-Heat-Flux thermal management of defense electronics [J]. IEEE Transactions on Components and Packaging Technologies, 2009, 32(2): 453-465. doi:  10.1109/TCAPT.2008.2005783
[14] Zhang T, Wang S Y, Rui J C, et al. Characteristic of an Ω-shape microchannel heatsink with different working fluid [J]. Chemical Industry and Engineering Progress, 2018, 37(8): 2954-2961. (in Chinese)
[15] Xia G D, Lv Y Z, Cheng L X, et al. Experimental study and dynamic simulation of the continuous two-phase instable boiling in multiple parallel microchannels [J]. International Journal of Heat and Mass Transfer, 2019, 138: 961-984. doi:  10.1016/j.ijheatmasstransfer.2019.04.124
[16] Wang C L, Tian M C. Experimental research on low Reynolds number liquid-liquid two-phase flow and heat transfer characteristics in micro channels [J]. CIESC Journal, 2021, 72(3): 1322-1332.
[17] Liu Z Y, Yao X Y, Cheng X, et al. Experimental study on two-phase boiling in wavy copper microchannels fabricated with ultrafast laser micromachining [J]. Journal of Micromechanics and Microengineering, 2020, 30(6): 065011. doi:  10.1088/1361-6439/ab870b
[18] Rasouli E, Naderi C, Narayanan V. Pitch and aspect ratio effects on single-phase heat transfer through microscale pin fin heat sinks [J]. International Journal of Heat and Mass Transfer, 2018, 118: 416-428. doi:  10.1016/j.ijheatmasstransfer.2017.10.105
[19] Rasouli E, Narayanan V. Single-phase cryogenic flow and heat transfer through microscale pin fin heat sinks [J]. Heat Transfer Engineering, 2016, 37(11): 994-1011. doi:  10.1080/01457632.2015.1098271
[20] Singh N R, Onkar S, Ramkumar J. Thermo-hydraulic performance of square micro pin fins under forced convection [J]. International Journal of Heat and Technology, 2021, 39(1): 170-178. doi:  10.18280/ijht.390118
[21] Saravanan V, Umesh C K, Seetharamu D H K. Numerical investigation of pressure drop and heat transfer in pin fin heat sink and micro channel pin fin heat sink [J]. International Journal of Heat and Technology, 2018, 36(1): 267-276. doi:  10.18280/ijht.360136
[22] Pati B, Sharma B, Palo A, et al. Numerical investigation of pin-fin thermal performance for staggered and inline arrays at low Reynolds number [J]. International Journal of Heat and Technology, 2018, 36(2): 697-703. doi:  10.18280/ijht.360235
[23] Zhao Y X, Lai Z C, Hu H T. Flow boiling heat transfer and pressure drop characteristics of R1234 ze(E) in metal foam filled tubes [J]. CIESC Journal, 2021, 72(10): 5074-5081.
[24] Ning J H, Sun Z Y, Bao C X, et al. Theoretical analysis on the cooling performance of high heat flux chip with dry ice [J]. CIESC Journal, 2021, 72(4): 2047-2056.
[25] Liang X, Cai D H, Deng J J, et al. Characteristics of boiling heat transfer and pressure drop of R410 A in 5 mm diameter inner-grooved copper tubes [J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2019, 47(3): 1-6. (in Chinese)
[26] Wang Z. Research on thermal interface resistance of cryogenic packaging for infrared focal plane assembly[D]. Shanghai: University of Chinese Academy of Sciences (Shanghai Institute of Technical Physics, Chinese Academy of Sciences), 2020.