[1] |
Zheng W J, Dong Z B, Wei Y H, et al. Phase field investigation of dendrite growth in the welding pool of aluminum alloy 2A14 under transient conditions [J]. Computational Materials Science, 2014, 82: 525-530. doi: https://doi.org/10.1016/j.commatsci.2013.08.022 |
[2] |
Wu H B. Numerical simulation and experimental study of milling deformation of aeronautical frame type monolithic structural parts[D]. Hangzhou: Zhejiang University, 2008. (in Chinese) |
[3] |
Maldague X. Introduction to NDT by active infrared thermography [J]. Materials Evaluation, 2002, 60(9): 1060-1073. |
[4] |
朱鑫浩, 侯德鑫, 叶树亮, 等. 圆柱面任意方向裂纹的双线阵激光热像检测[J]. 红外与激光工程, 2020, 49(09): 316-324. doi: 10.3788/IRLA20200097
Zhu Xinhao, Hou Dexin, Ye Shuliang, et al. Dual linear array laser thermography detection of arbitrary direction cracks on cylindrical surface [J]. Infrared and Laser Engineering, 2020, 49(9): 20200097. (in Chinese) doi: 10.3788/IRLA20200097 |
[5] |
王晓娜, 张亦舒, 侯德鑫, 等. 基于线激光正交扫描的电感微裂纹热成像检测[J]. 红外与激光工程, 2020, 49(07): 152-159. doi: 10.3788/IRLA20190522
Wang Xiaona, Zhang Yishu, Hou Dexin, et al. Detection of microcrack in inductor based on orthogonal scanning line laser thermography [J]. Infrared and Laser Engineering, 2020, 49(7): 20190522. (in Chinese) doi: 10.3788/IRLA20190522 |
[6] |
柳祎, 史浩东, 姜会林, 等. 粗糙目标表面红外偏振特性研究[J]. 中国光学, 2020, 13(03): 459-471.
Liu Yi, Shi Haodong, Jiang Huilin, et al. Infrared polarization properties of targets with rough surface [J]. Chinese Optics, 2020, 13(3): 459-471. (in Chinese) |
[7] |
杨建国, 罗琳, 金伟其, 等. “十”字型四孔径视场部分重叠仿生热成像[J]. 光学精密工程, 2022, 30(09): 1019-1028.
Yang Jianguo, Luo Lin, Jin Weiqi, et al. Bionic thermal imaging with cross-shaped four-aperture partially overlapped field of view [J]. Optics and Precision Engineering, 2022, 30(9): 1019-1028. (in Chinese) |
[8] |
邹永宁, 张智斌, 李琦等. 基于Hessian矩阵和支持向量机的CT图像裂纹分割[J]. 光学精密工程, 2021, 29(10): 2517-2527. doi: 10.37188/OPE.2021.0349
Zou Yongning, Zhang Zhibin, Li Qi, et al. Crack detection and segmentation in CT images using Hessian matrix and support vector machine [J]. Optics and Precision Engineering, 2021, 29(10): 2517-2527. (in Chinese) doi: 10.37188/OPE.2021.0349 |
[9] |
赵家旺, 张运海, 王发民等. 线扫描虚拟结构调制共聚焦显微成像[J]. 中国光学, 2021, 14(02): 431-445. doi: 10.37188/CO.2020-0120
Zhao Jiawang, Zhang Yunhai, Wang Famin, et al. Line-scanning confocal microscopic imaging based on virtual structured modulation [J]. Chinese Optics, 2021, 14(2): 431-445. (in Chinese) doi: 10.37188/CO.2020-0120 |
[10] |
Puthiyaveettil N, Rajagopal P, Balasubramaniam K, et al. Influence of absorptivity of the material surface in crack detection using Laser spot thermography [J]. NDT & E International, 2021, 120: 102438. doi: 10.1016/j.ndteint.2021.102438 |
[11] |
Khodayar F, Sojasi S, Maldague X. Infrared thermography and NDT: 2050 horizon [J]. Quantitative InfraRed Thermography Journal, 2016, 13(2): 210-231. doi: 10.1080/17686733.2016.1200265 |
[12] |
Qiu J, Pei C, Liu H, et al. Detection of surface cracks by laser spot thermography at elevated temperature [J]. International Journal of Applied Electromagnetics and Mechanics, 2019, 59(4): 1553-1559. doi: 10.3233/JAE-171195 |
[13] |
Rashed A, Almond D P, Rees D A S, et al. Crack detection by laser spot imaging thermography[C]//AIP Conference Proceed-ings, 2007, 894(1): 500-506. |
[14] |
Pech-May N W, Oleaga A, Mendioroz A, et al. Fast characterization of the width of vertical cracks using pulsed laser spot infrared thermography [J]. Journal of Nondestructive Evaluation, 2016, 35(2): 1-10. doi: https://doi.org/10.1007/s10921-016-0344-x |
[15] |
González J, Mendioroz A, Sommier A, et al. Fast sizing of the width of infinite vertical cracks using constant velocity Flying-Spot thermography [J]. NDT & E International, 2019, 103: 166-172. |
[16] |
Pech-May N W, Oleaga A, Mendioroz A, et al. Vertical cracks characterization using lock-in thermography: II nfinite cracks [J]. Measurement Science and Technology, 2014, 25(11): 115602. doi: 10.1088/0957-0233/25/11/115602 |
[17] |
Jinyeol Y, Jaemook C, Soonkyu H, et al. A reference-free micro defect visualization using pulse laser scanning thermography and image processing [J]. Measurement Science and Technology, 2016, 27(8): 085601. doi: 10.1088/0957-0233/27/8/085601 |
[18] |
Colom M, Rodriguez A J, Mendioroz A, et al. Imaging real cracks: evaluation of the depth and width of narrow fatigue cracks in Al-alloys using laser-spot lock-in thermography[C]//Thermosense: Thermal Infrared Applications XLIII, 2021, 11743: 117430F. |
[19] |
Yang J, Dong L H, Wang H D, et al. The curve cluster analyses for the characterizations of material defects by long-pulsed laser thermography [J]. Infrared Physics & Technology, 2022, 120: 103956. doi: https://doi.org/10.1016/j.infrared.2021.103956 |
[20] |
Yang J, Dong L H, Wang H D, et al. The wavelet-based self-similarity analysis for the detection of fatigue microcrack by the joint scanning laser thermography [J]. International Journal of Thermophysics, 2022, 43(2): 1-22. |