[1] Li J N, Zhao H J, Deng S H, et al. Laser melting deposition of aluminium 7050 alloy: heat treatment, microstructure and mechanical properties [J]. Materials Science and Technology, 2022, 38(15): 1266-1275. doi:  10.1080/02670836.2022.2076483
[2] Zhai Z Y, Wei C, Zhang Y C, et al. Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser [J]. Applied Surface Science, 2020, 502: 144131. doi:  10.1016/j.apsusc.2019.144131
[3] 翟兆阳, 梅雪松, 王文君等. 碳化硅陶瓷基复合材料激光刻蚀技术研究进展 [J]. 中国激光, 2020, 47(6): 24-34. DOI:  10.3788/CJL202047.0600002

Zhai Zhaoyang, Mei Xuesong, Wang Wenjun, et al. Research advancement on laser etching technology of silicon carbide ceramic matrix composite [J]. Chinese Journal of Lasers, 2020, 47(6): 0600002. (in Chinese)
[4] Shin J S, Lee L, Lee Z H, et al. Effect of nozzle types on the laser cutting performance for 60-mm-thick stainless steel [J]. Optics and Laser Technology, 2019, 119: 105607. doi:  10.1016/j.optlastec.2019.105607
[5] 翟兆阳, 曲雅静, 张延超等. 碳纤维增强碳基复合材料加工技术研究与探讨 [J]. 复合材料学报, 2022, 39(5): 1990-2009. doi:  10.13801/j.cnki.fhclxb.20211106.001

Zhai Zhaoyang, Qu Yajing, Zhang Yanchao, et al. Research and discussion on processing technology of carbon fiber reinforced carbon matrix composites [J]. Acta Materiae Compositae Sinica, 2022, 39(5): 1990-2009. (in Chinese) doi:  10.13801/j.cnki.fhclxb.20211106.001
[6] Zhai Z Y, Qu Y J, Zhang Y C, et al. Preparation and performance of rGO coating on C/C composite finger seal with femtosecond laser [J]. Materials Letters, 2022, 312: 131685. doi:  10.1016/J.MATLET.2022.131685
[7] Zhai Z Y, Zhang R H, Zhang Y C, et al. Fabrication of microstructure on C/SiC surface via femtosecond laser diffraction [J]. Materials Letters, 2021, 293: 129711. doi:  10.1016/J.MATLET.2021.129711
[8] 陈继民, 肖荣诗, 王跃文等. 激光切割工艺参数的智能选择系统 [J]. 中国激光, 2004, 31(6): 757-760. doi:  10.3321/j.issn:0258-7025.2004.06.027

Chen Jimin, Xiao Rongshi, Wang Yuewen, et al. Intelligent system for selecting laser Cutting Parameters [J]. Chinese Journal of Lasers, 2004, 31(6): 757-760. (in Chinese) doi:  10.3321/j.issn:0258-7025.2004.06.027
[9] 孙晓峰, 梁静静, 李金国等. 激光增材制造高温合金材料与工艺研究进展 [J]. 金属学报, 2021, 57(11): 1471-1483. doi:  10.11900/0412.1961.2021.00371

Sun Xiaofeng, Liang Jingjing, Li Jinguo, et al. Research and development in materials and processes of superalloy fabricated by laser additive manufacturing [J]. Acta Metallurgica Sinica, 2021, 57(11): 1471-1483. (in Chinese) doi:  10.11900/0412.1961.2021.00371
[10] 陈聪, 高明, 顾云泽等. 光纤激光切割铝合金薄板工艺特性研究 [J]. 中国激光, 2014, 41(6): 79-85 DOI:  10.3788/CJL201441.0603004

Chen Cong, Gao Ming, Gu Yunze, et al. Study on fiber laser cutting of aluminum alloy sheet [J]. Chinese Journal of Lasers, 2014, 41(6): 0603004. (in Chinese)
[11] Li X Q, Guo G Q, Li D S, et al. Energy efficiency and cut-quality improvement during fiber laser cutting of aluminum alloy in the different hardened conditions [J]. Materials Today Communications, 2022, 33: 104236. doi:  10.1016/j.mtcomm.2022.104236
[12] Sharma V K, Kumar V. Study on material transfer and surface properties during fiber laser cutting of A653 galvanized steel sheet [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(8): 1-17. doi:  10.1007/s40430-019-1842-4
[13] Tahir A F M, Rahim E A. A study on the laser cutting quality of ultra-high strength steel [J]. Journal of Mechanical Engineering and Sciences, 2016, 10(2): 2145-2158. doi:  10.15282/jmes.10.2.2016.18.0202
[14] Miraoui I, Elimi E, Boujelbene M, et al. Analysis of roughness and microstructure for high-power laser cutting of stainless steel [J]. Advanced Science Letters, 2013, 19(2): 483-486. doi:  10.1166/asl.2013.4775
[15] Majid S, Gabriele Z, Alberto V, et al. Investigation of thermal behavior of structural steel S235N under laser cutting process: Experimental, analytical, and numerical studies [J]. Engineering Structures, 2022, 269: 114754 doi:  10.1016/J.ENGSTRUCT.2022.114754
[16] Buj-Corrali, Costa-Herrerol, Domínguez-Fernández A. Effect of process parameters on the quality of laser-cut Stainless steel thin plates [J]. Metals, 2021, 11(8): 1224. doi:  10.3390/MET11081224
[17] Scintilla L D. Continuous-wave fiber laser cutting of aluminum thin sheets: effect of process parameters and optimization [J]. Optical Engineering, 2014, 53(6): 066113. doi:  10.1117/1.OE.53.6.066113
[18] Zhai Z Y, Fan Q Y, Qu Y J, et al. Heat transfer mechanism of fiber reinforced composites processed by pulsed laser [J]. Optics and Lasers in Engineering, 2023, 163: 107473. doi:  10.1016/J.OPTLASENG.2023.107473