| [1] | Liu L R. Laser communications in space Ⅰ optical link and terminal technology [J]. Chinese Journal of Lasers, 2007, 34(1): 3-20. (in Chinese) |
| [2] | Dreischer T, Maerki A, Weigel T, et al. Operating in sub-arc seconds: High-precision laser terminals for intersatellite communications[C]//Optomechatronic Systems III. International Society for Optics and Photonics, 2002, 4902: 87-98. |
| [3] | Jiang M, Wang Y P, Fang W, et al. Design of guiding system for solar irradiance monitor [J]. Electronic Measurement Technology, 2013, 30(9): 84-88. (in Chinese) |
| [4] | Wang Z, Li Z H. Design of optical-mechanical structural for lunar-based extreme ultraviolet camera [J]. Optics and Precision Engineering, 2011, 19(10): 2427-2433. (in Chinese) doi: 10.3788/OPE.20111910.2427 |
| [5] | Li Z H. Opto-mechanical design of lunar based EUV camera for imaging the earth [J]. Chinese Journal of Scientific Instrument, 2010, 31(10): 2352-2356. (in Chinese) |
| [6] | Xu H, Guan Y J. Structural design of large aperture SiC mirror subassembly [J]. Infrared and Laser Engineering, 2014, 43(S1): 83-88. (in Chinese) |
| [7] | Bao Q H, Sha W, Chen C Z, et al. Ultra-lightweight design of ϕ610 mm circular primary mirror supported in centre [J]. Acta Photonica Sinica, 2016, 45(9): 128-134. (in Chinese) |
| [8] | Zhang Y Q, Liu Z H, Li Z G, et al. Optimum structural design for collimation frame of space-based two-dimensional turntable [J]. Infrared and Laser Engineering, 2017, 46(S1): S113003. (in Chinese) |
| [9] | Yan Z X, Jia J J. Design of space-borne two-dimensional turntable of ATP against the environment of force and vibration [J]. Science Technology and Engineering, 2014, 14(19): 148-154. (in Chinese) |
| [10] | He S, Wang Z S. Modal analysis and experimental verification of two-dimensional turntable [J]. Manufacturing Automation, 2016, 38(5): 139-141, 146. (in Chinese) |
| [11] | Zheng Y. Research on dynamic modeling method of angular contact ball bearing joint[D]. Wuhan: Huazhong University of Science and Technology, 2015. (in Chinese) |
| [12] | Kang Y, Shen P C, Huang C C, et al. A modification of the Jones–Harris method for deep-groove ball bearings [J]. Tribology International, 2006, 39(11): 1413-1420. doi: 10.1016/j.triboint.2005.12.005 |
| [13] | Tiwari M, Gupta K, Prakash O. Effect of radial internal clearance of a ball bearing on the dynamics of a balanced horizontal rotor [J]. Journal of Sound and Vibration, 2000, 238(5): 723-756. doi: 10.1006/jsvi.1999.3109 |
| [14] | Wang J, Lu E, Wang J Q, et al. A study on the simplifying method of ball bearing in structural analysis [J]. Optics and Precision Engineering, 1999, 7(2): 110-114. (in Chinese) |
| [15] | Wan C S. Analysis Method of Rolling Bearing[M]. Beijing: Machinery Industry Press, 1987. (in Chinese) |