[1] Zhao C, Zhao M, Shahid M, et al. Restrained TGO growth in YSZ/NiCrAlY thermal barrier coatings by modified laser remelting[J]. Surface and Coatings Technology, 2017, 309:1119-1125.
[2] Wei L, Tong X Y, Li J. Research status of self repairing thermal barrier coating and laser preparation method[J]. Information of Surface Engineering, 2016, 16(1):17-21.
[3] Zhang P, Li F, Zhang X, et al. Thermal shock resistance of thermal barrier coatings with different surface shapes modified by laser remelting[J]. Journal of Thermal Spray Technology, 2019, 28(3):417-432.
[4] Batista C, Portinha A, Ribeiro R M, et al. Morphological and microstructural characterization of laser-glazed plasma-sprayed thermal barrier coatings[J]. Surface & Coatings Technology, 2006, 200(9):2929-2937.
[5] Basu D, Funke C, Steinbrech R W. Effect of heat treatment on elastic properties of separated thermal barrier coatings[J]. Journal of Materials Research, 1999, 14(12):4643-4650
[6] Cao X Q, Vassen R, Stoever D. Ceramic materials for thermal barrier coatings[J]. Journal of the European Ceramic Society, 2004, 24(1):1-10.
[7] Cao X Q, Vassen R, Tietz F, et al. New double-ceramic-layer thermal barrier coatings based on zirconia-rare earth composite oxides[J]. Journal of the European Ceramic Society, 2006, 26(3):247-251.
[8] Xu Z, He L, Mu R, et al. Double-ceramic-layer thermal barrier coatings of La2Zr2O7/YSZ deposited by electron beam-physical vapor deposition[J]. Journal of Alloys and Compounds, 2009, 473(1-2):509-515.
[9] Wang L, Wang Y, Sun X G, et al. Finite element simulation of residual stress of double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings using birth and death element technique[J]. Computational Materials Science, 2012, 53(1):117-127.
[10] Wang L, Wang Y, Sun X G, et al. Thermal shock behavior of 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings fabricated by atmospheric plasma spraying[J]. Ceramics International, 2012, 38(5):3595-3606.
[11] Zhenhua X U, Limin H E, Rende M U, et al. Double-ceramic-layer thermal barrier coatings of La2Zr2O7/YSZ deposited by electron beam-physical vapor deposition[J]. Journal of Alloys & Compounds, 2009, 473(1):509-515.
[12] Cheng B, Yang G J, Zhang Q, et al. Gradient thermal cyclic behavior of La2Zr2O7/YSZ DCL-TBCs with equivalent thermal insulation performance[J]. Journal of the European Ceramic Society, 2018, 38(4):1888-1896.
[13] Han M, Zhou G, Huang J, et al. A parametric study of the double-ceramic-layer thermal barrier coatings part I:Optimization design of the ceramic layer thickness ratio based on the finite element analysis of thermal insulation (take LZ7C3/8YSZ/NiCoAlY DCL-TBC for an example)[J]. Surface and Coatings Technology, 2013, 236:500-509.
[14] Chen H, Liu Y, Gao Y, et al. Design, preparation, and characterization of graded YSZ/La2Zr2O7 thermal barrier coatings[J]. Journal of the American Ceramic Society, 2010, 93(6):1732-1740.
[15] Ahmadi-Pidani R, Shoja-Razavi R, Mozafarinia R, et al. Improving the thermal shock resistance of plasma sprayed CYSZ thermal barrier coatings by laser surface modification[J]. Optics & Lasers in Engineering, 2012, 50(5):780-786.
[16] Zhou Y C, Hashida T. Thermal fatigue failure induced by delamination in thermal barrier coating[J]. International Journal of Fatigue, 2002, 24(2-4):407-417.
[17] Chang F, Zhou K, Tong X, et al. Microstructure and thermal shock resistance of the peg-nail structured TBCs treated by selective laser modification[J]. Applied Surface Science, 2014, 317:598-606.
[18] Zhu C, Li P, Javed A, et al. An investigation on the microstructure and oxidation behavior of laser remelted air plasma sprayed thermal barrier coatings[J]. Surface & Coatings Technology, 2012, 206(18):3739-3746.