留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

超声波对BT20钛合金激光沉积修复作用机制探究

王维 郭鹏飞 杨光 钦兰云 卞宏友 王伟 任宇航

王维, 郭鹏飞, 杨光, 钦兰云, 卞宏友, 王伟, 任宇航. 超声波对BT20钛合金激光沉积修复作用机制探究[J]. 红外与激光工程, 2014, 43(8): 2453-2459.
引用本文: 王维, 郭鹏飞, 杨光, 钦兰云, 卞宏友, 王伟, 任宇航. 超声波对BT20钛合金激光沉积修复作用机制探究[J]. 红外与激光工程, 2014, 43(8): 2453-2459.
Wang Wei, Guo Pengfei, Yang Guang, Qin Lanyun, Bian Hongyou, Ren Yuhang, . Effect of ultrasonic on laser deposition repairing of BT20 titanium alloy[J]. Infrared and Laser Engineering, 2014, 43(8): 2453-2459.
Citation: Wang Wei, Guo Pengfei, Yang Guang, Qin Lanyun, Bian Hongyou, Ren Yuhang, . Effect of ultrasonic on laser deposition repairing of BT20 titanium alloy[J]. Infrared and Laser Engineering, 2014, 43(8): 2453-2459.

超声波对BT20钛合金激光沉积修复作用机制探究

基金项目: 

国家自然科学基金(51375316);辽宁省高校创新团队(LT2011004);辽宁省自然科学基金(201202173)

详细信息
    作者简介:

    王维(1957- ),男,教授,博士生导师,博士,主要从事激光快速成形,激光再制造技术等方面的研究。Email:Wangw1116@sau.edu.cn

  • 中图分类号: TG665

Effect of ultrasonic on laser deposition repairing of BT20 titanium alloy

  • 摘要: 通过ANSYS有限元数值模拟和试验相结合,研究了超声波对BT20钛合金激光沉积修复过程的作用。结果表明,超声波振幅为0.2~0.55 m时,能得到成形质量较好的修复层;当超声波振幅为0.4 m时,超声波对熔池的作用主要表现为超声的机械作用和热作用,而不是超声空化效应;超声的机械作用使得组织的气孔率降低,但是其机械作用不足以克服修复层晶粒外延生长的驱动力,没能阻止柱状晶沿沉积方向的生长;超声的机械作用将晶粒片层组织中的板条打断,而热作用使得熔池凝固速度降低,从而使板条变短变粗。
  • [1]
    [2] Zhang Xiaohong, Lin Xin, Chen Jing, et al. Effects of heat treatment on the microstructures and mechanical properties of TAl5 titanium alloys by laser solid forming[J]. Rare Metal Materials and Engineering, 2011, 40(1): 142-147. (in Chinese)
    [3] Xi Mingzhe, Gao Shiyou. Heat-treated microstructures and mechanical properties of TA15 titanium alloy fabricated by laser rapid forming[J]. Chinese Journal of Laser, 2012, 39(1): 0103007-1-0103007-6. (in Chinese)
    [4] 张小红, 林鑫, 陈静, 等. 热处理对激光立体成形TA15合金组织及力学性能的影响[J]. 稀有金属材料与工程, 2011, 40(1): 142-147.
    [5] Yu Xinnian, Sun Fuquan, Liu Xinyu, et al. Research on laser cladding repairing for defect on titanium alloy surface[J]. Aeronautical Manufacturing Technology, 2011, (16): 116-118. (in Chinese)
    [6]
    [7] Zheng Lijuan, Li Juan, He Dachuan, et al. Analysis on temperature field of multi-path laser cladded and microstructure of coatings layer[J]. Infrared and Laser Engineering, 2013, 42(S1): 52-57. (in Chinese)
    [8]
    [9] 席明哲, 高士友. 激光快速成形TA15钛合金热处理组织及其力学性能[J]. 中国激光, 2012, 39(1): 0103007-1-0103007-6.
    [10] Lin Yinghua, Chen Zhiyong, Li Yuehua, et al. Microstructure and hardness characteristic of in-situ synthesized TiB coating by laser cladding on TC4 titanium alloy[J]. Infrared and Laser Engineering, 2012, 41(10): 2694-2698. (in Chinese)
    [11] Wang Huaming, Zhang Shuquan, Wang Xiangming. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Laser, 2009, 36(12): 3204-3209. (in Chinese)
    [12]
    [13]
    [14] Yan Zhangong, Lin Feng, Yan Yongnian, et al. Overview Of direct metal rapid prototyping and manufacturing technologies[J]. Chinese Journal Of Mechanical Engineering, 2005, 41(11): 1-7. (in Chinese)
    [15] Li Huaixue, Gong Shuili, Sun Fan, et al. Development and application of laser additive manufacturing for metal component[J]. Aeronautical Manufacturing Technology, 2012, (20): 25-31. (in Chinese)
    [16] 于新年, 孙福权, 刘新宇, 等. 钛合金表面缺陷的激光修复修复研究[J]. 航空制造技术, 2011, (16): 116-118.
    [17] Zhong Minlin, Ning Guoqing, Liu Wenjin. Research and development on laser direct manufacturing metallic components[J]. Laser Technology, 2002, 26(10): 388-393. (in Chinese)
    [18]
    [19]
    [20] Zhang Anfeng, Li Dichen, Lu Bingheng. Research progress in laser direct metal rapid prototyping technology[J]. Ordnance Material Science and Engineering, 2007, 30(50): 68-74. (in Chinese)
    [21] Xu Binshi, Dong Shiyun, Zhu Sheng, et al. Prospects and developing of remanufacture forming technology[J]. Journal of Mechanical Engineering, 2012, 48(15): 96-105. (in Chinese)
    [22] 郑丽娟, 李燕, 何大川, 等. 激光多道熔覆温度场及熔覆层组织分析[J]. 红外与激光工程, 2013, 42(S1): 52-57.
    [23] Chen Jing, Yang Haiou, Li Yanmin, et al. The research on two kinds of creaking behavior and mechanism of cladding in rapid laser forming process[J]. Applied Laser, 2002, 22(3): 300-304. (in Chinese)
    [24]
    [25] Huang Jinri, Xue Liqin, Mu Guanghua, et al. Effect of ultrasonic casting on alloy[J]. Journal of Hubei Polytechnic University, 1996, 11(4): 29-33. (in Chinese)
    [26]
    [27] 林英华, 陈志勇, 李月华, 等. TC4 钛合金表面激光熔覆原位制备TiB 陶瓷涂层的微观组织特征与硬度特性[J]. 红外与激光工程, 2012, 41(10): 2694-2698.
    [28] Li Junwen, Momon tadashi. Effect of application time of ultrasonic vibration on the structure of ingots[J]. Foundry Technology, 2004, 25(1): 44-46, 49. (in Chinese)
    [29]
    [30] Zhao Zhongxing, Mu Yugang, Zhou Guangying, et al. The effect of ultrasonic vibration on crystallizing process of casting alloy[J]. Journal of Shenyang Institute of Technology, 1997, 16(3): 9-13. (in Chinese)
    [31]
    [32] Huang Xiaowei, Xi Juntong, Lebrun J L, et al. Influence of processing parameters on geometric characterizations of laser cladding forming 316L stainless steel[J]. Laser Optoelectronics Progress, 2011, 48(7): 071404-1-071404-6. (in Chinese)
    [33] Feng Nuo. Ultrasonic Handbook[M]. Nanjing: Nanjing University Press, 1999. (in Chinese)
    [34] 王华明, 张述泉, 王向明. 大型钛合金结构件激光直接制造的进展与挑战(邀请论文)[J]. 中国激光, 2009, 36(12): 3204-3209.
    [35] Ma Dayou, Shen Hao. Handbook of Acoustics[M]. Beijing: Science Press, 1983: 142-151. (in Chinese)
    [36]
    [37] Xu Zhiwu, Yan Jiuchun, Wang Changsheng, et al. Propagation characteristic of ultrasonic in AlMMC s and its effect on wetting behavior of liquid filler[J]. Transactions of The China Welding Institution, 2010, 31(12): 5-8. (in Chinese)
    [38]
    [39] Yang Yunmeng. Experimental research on the effect of ultrasonic on solidification of aluminum alloy[D]. Changsha: Central South University, 2009. (in Chinese)
    [40] 闫占功, 林峰, 颜永年, 等. 直接金属快速成形制造技术综述[J]. 机械工程学报, 2005, 41(11): 1-7.
    [41] Li Jianhua, Chen Zikuan. Application of BP neural network to viscosity prediction of aqueous glycerol solution[J]. Computer Simulation, 2009, 26(2): 193-268. (in Chinese)
    [42]
    [43] Liu Yanfeng, Liu Zhuqin. Study on the relationship between sound velocity and the concentration of glycerol solution based on ultrasonic[J]. Information Technology, 2011(12): 126-130. (in Chinese)
    [44]
    [45] 李怀学, 巩水利, 孙帆, 等. 金属零件激光增材制造技术的发展及应用[J]. 航空制造技术, 2012, (20): 25-31.
    [46]
    [47]
    [48] 钟敏霖, 宁国庆, 刘文今. 激光熔覆快速制造金属零件研究与发展[J]. 激光技术, 2002, 26(10): 388-393.
    [49]
    [50]
    [51] 张安峰, 李涤尘, 卢秉恒. 激光直接金属快速成形技术的研究进展[J]. 兵器材料科学与工程, 2007, 30(50): 68-74.
    [52]
    [53]
    [54] 徐滨士, 董世运, 朱胜, 等. 再制造成形技术发展与展望[J]. 机械工程学报, 2012, 48(15): 96-105.
    [55]
    [56]
    [57] 陈静, 杨海欧, 李延民, 等. 激光快速成形过程中熔覆层的两种开裂行为及其机理研究[J]. 应用激光, 2002, 22(3): 300-304.
    [58]
    [59]
    [60] 黄金日, 薛立勤, 穆光华, 等. 超声波对铸造合金组织和机械性能的影响[J]. 湖北工学院学报, 1996, 11(4): 29-33.
    [61]
    [62]
    [63] 李军文, 桃野正. 超声波振动处理时间对铸锭组织的影响[J]. 铸造技术, 2004, 25(1): 44-46, 49.
    [64]
    [65]
    [66] 赵忠兴, 穆玉刚, 周广英, 等. 超声振动对铸造合金结晶过程的影响[J]. 沈阳工业学院学报, 1997, 16(3): 9-13.
    [67]
    [68]
    [69] 黄小伟, 习俊通, Lebrun J L, 等. 工艺参数对激光熔覆成形316L不锈钢形状的影响规律[J]. 激光与光电子学进展, 2011, 48(7): 071404-1-071404-6.
    [70]
    [71]
    [72] 冯若. 超声手册[M]. 南京: 南京大学出版社, 1999.
    [73]
    [74]
    [75] 马大猷, 沈壕. 声学手册[M]. 北京: 科学出版社, 1983: 142-151.
    [76]
    [77]
    [78] 许志武, 闫久春, 王昌胜, 等. 超声波的传播特性及其对钎料润湿行为的影响[J]. 焊接学报, 2010, 31(12): 5-8.
    [79]
    [80]
    [81] 杨运猛. 超声场对铝合金凝固作用机制试验研究[D]. 长沙: 中南大学, 2009.
    [82]
    [83]
    [84] 李建华, 陈自宽. BP神经网络在甘油水溶液粘度预测中的应用[J]. 计算机仿真, 2009, 26(2): 193-268.
    [85]
    [86]
    [87] 刘艳峰, 刘竹琴. 基于超声波研究甘油溶液中声速与浓度的关系[J]. 信息技术, 2011(12): 126-130.
  • [1] 张子浩, 王旭, 黄怡晨, 李福泉, 李俐群, 蔺晓超, 杨诗瑞, 郭鹏.  供油孔流量数值模拟及其飞秒激光加工工艺优化 . 红外与激光工程, 2023, 52(4): 20220454-1-20220454-10. doi: 10.3788/IRLA20220454
    [2] 卞宏友, 徐效文, 刘伟军, 王蔚, 邢飞, 王慧儒.  激光沉积修复DD5合金的枝晶外延生长控制与显微组织特征 . 红外与激光工程, 2023, 52(5): 20220731-1-20220731-13. doi: 10.3788/IRLA20220731
    [3] 傅杨奥骁, 江涛, 刘庆宗, 丁明松, 李鹏, 董维中, 高铁锁, 许勇.  高超声速飞行器热喷高温燃气红外辐射特性数值模拟 . 红外与激光工程, 2022, 51(10): 20220023-1-20220023-10. doi: 10.3788/IRLA20220023
    [4] 刘卫平, 吕玉伟, 吴丽雄, 韦成华, 王家伟, 韩永超, 张爽.  玻璃钢激光烧蚀碳化致微波传输衰减的数值模拟 . 红外与激光工程, 2021, 50(12): 20210137-1-20210137-7. doi: 10.3788/IRLA20210137
    [5] 李紫慧, 王续跃.  层合板激光往复扫描弯曲中翘曲变形数值模拟 . 红外与激光工程, 2018, 47(12): 1206008-1206008(8). doi: 10.3788/IRLA201847.1206008
    [6] 李紫慧, 王续跃.  金属复合板激光弯曲过程中翘曲变形数值模拟 . 红外与激光工程, 2018, 47(5): 506004-0506004(7). doi: 10.3788/IRLA201847.0506004
    [7] 彭进, 张文洁, 王星星, 郭国全, 张芙蓉.  焊丝熔化填充方式对激光焊接熔池影响的数值模拟 . 红外与激光工程, 2018, 47(3): 306005-0306005(7). doi: 10.3788/IRLA201847.0306005
    [8] 卞宏友, 翟泉星, 曲伸, 杨光, 王伟, 王维.  GH738合金激光沉积修复试验研究 . 红外与激光工程, 2018, 47(7): 706002-0706002(6). doi: 10.3788/IRLA201847.0706002
    [9] 于学丽, 丁双红, 贾海旭, 辛磊.  主动调Q腔内和频拉曼激光器的数值模拟 . 红外与激光工程, 2017, 46(9): 906001-0906001(7). doi: 10.3788/IRLA201746.0906001
    [10] 高铁锁, 江涛, 丁明松, 董维中, 刘庆宗.  高超声速拦截弹绕流红外辐射特性数值模拟 . 红外与激光工程, 2017, 46(12): 1204001-1204001(8). doi: 10.3788/IRLA201746.1204001
    [11] 钦兰云, 庞爽, 杨光, 王超, 王维.  激光沉积修复ZL114A铝合金的显微组织及显微硬度研究 . 红外与激光工程, 2017, 46(5): 506004-0506004(6). doi: 10.3788/IRLA201746.0506004
    [12] 卞宏友, 雷洋, 李英, 杨光, 钦兰云, 王维, 韩双隆.  感应预热对激光沉积修复TA15钛合金显微组织和残余应力的影响 . 红外与激光工程, 2016, 45(7): 705003-0705003(6). doi: 10.3788/IRLA201645.0705003
    [13] 卞宏友, 赵翔鹏, 李英, 杨光, 钦兰云, 王维, 任宇航.  激光沉积修复GH4169合金试验研究 . 红外与激光工程, 2016, 45(2): 206006-0206006(6). doi: 10.3788/IRLA201645.0206006
    [14] 常金勇, 强希文, 胡月宏, 宗飞, 李志朝, 封双连.  激光传输光束抖动效应的数值模拟 . 红外与激光工程, 2015, 44(S1): 46-49.
    [15] 戴毅斌, 樊玉杰, 李明尧, 刘晓宇, 蒋彭胜, 殷开婷.  多点激光微冲击成形的数值模拟研究 . 红外与激光工程, 2015, 44(S1): 50-56.
    [16] 王维, 刘奇, 杨光, 钦兰云, 岳耀猛.  电磁搅拌辅助钛合金激光沉积修复的电磁场模拟与验证 . 红外与激光工程, 2015, 44(9): 2666-2671.
    [17] 吴红兵, 王朋.  钛合金超精密切削过程的数值模拟与实验分析 . 红外与激光工程, 2014, 43(12): 3988-3992.
    [18] 许兆美, 刘永志, 周建忠, 蒋素琴, 王庆安, 汪通, 洪宗海.  基于生死单元的激光铣削温度场数值模拟与验证 . 红外与激光工程, 2014, 43(6): 1755-1760.
    [19] 钦兰云, 王婷, 杨光, 王维, 卞宏友, 任宇航.  激光沉积修复BT20合金试验研究 . 红外与激光工程, 2014, 43(2): 404-410.
    [20] 唐力铁, 于志闯, 赵乐至, 尹飞, 郭士波, 谈斌.  DF/HF化学激光器喷管总压损失的数值模拟 . 红外与激光工程, 2013, 42(5): 1194-1197.
  • 加载中
计量
  • 文章访问数:  229
  • HTML全文浏览量:  32
  • PDF下载量:  246
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-12-05
  • 修回日期:  2014-01-10
  • 刊出日期:  2014-08-25

超声波对BT20钛合金激光沉积修复作用机制探究

    作者简介:

    王维(1957- ),男,教授,博士生导师,博士,主要从事激光快速成形,激光再制造技术等方面的研究。Email:Wangw1116@sau.edu.cn

基金项目:

国家自然科学基金(51375316);辽宁省高校创新团队(LT2011004);辽宁省自然科学基金(201202173)

  • 中图分类号: TG665

摘要: 通过ANSYS有限元数值模拟和试验相结合,研究了超声波对BT20钛合金激光沉积修复过程的作用。结果表明,超声波振幅为0.2~0.55 m时,能得到成形质量较好的修复层;当超声波振幅为0.4 m时,超声波对熔池的作用主要表现为超声的机械作用和热作用,而不是超声空化效应;超声的机械作用使得组织的气孔率降低,但是其机械作用不足以克服修复层晶粒外延生长的驱动力,没能阻止柱状晶沿沉积方向的生长;超声的机械作用将晶粒片层组织中的板条打断,而热作用使得熔池凝固速度降低,从而使板条变短变粗。

English Abstract

参考文献 (87)

目录

    /

    返回文章
    返回