新型高精度空间折转光管的设计方法

尹逊龙; 吴易明; 吴璀罡; 姚震

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

新型高精度空间折转光管的设计方法

尹逊龙, 吴易明, 吴璀罡, 姚震

文章导航 > 红外与激光工程 > 2014 > 43(11): 3735-3739

尹逊龙, 吴易明, 吴璀罡, 姚震. 新型高精度空间折转光管的设计方法[J]. 红外与激光工程, 2014, 43(11): 3735-3739.

引用本文:

尹逊龙, 吴易明, 吴璀罡, 姚震. 新型高精度空间折转光管的设计方法[J]. 红外与激光工程, 2014, 43(11): 3735-3739.

Yin Xunlong, Wu Yiming, Wu Cuigang, Yao Zhen. New design method of precise space replicated light-tube[J]. Infrared and Laser Engineering, 2014, 43(11): 3735-3739.

Citation:

Yin Xunlong, Wu Yiming, Wu Cuigang, Yao Zhen. New design method of precise space replicated light-tube[J]. Infrared and Laser Engineering, 2014, 43(11): 3735-3739.

新型高精度空间折转光管的设计方法

1.
中国科学院西安光学精密机械研究所,陕西西安 710119;
2.
中国科学院大学,北京 100049

详细信息

作者简介:
尹逊龙(1990－),男,硕士生,主要从事光学设计及检测方面的研究.Email:yinxunlong2011@163.com

中图分类号: TH74

New design method of precise space replicated light-tube

1.
Xi'an Institute of Optics and Precision Mechanics,Chinese Academy of Sciences,Xi'an 710119,China;
2.
University of Chinese Academy of Sciences,Beijing 100049,China

摘要: 星模惯测组合装置在标调过程中,要求测量星模拟器出射光束与惯组棱镜反射光束的方位夹角,两光束不仅方向相反且存在空间平移,为了实现单台经纬仪对该角度的测量,该系统中需要加入特定的折转光管.提出了一种新型的空间转折光管的设计方法,能够实现光路的180折转和垂直于星模拟器光轴的平面内的二维平移,设计中采用了直角屋脊棱镜与斜方棱镜,很好地消除了安装误差;为了消除由于棱镜加工误差带来的折转光管传递偏差,设计中加入双光楔结构.折转光管的光路通过双光楔机构可以发生一定的偏转,该偏转可以抵消折转光管各个部分带来的传递偏差.实验结果表明,该设计方法可以很好的实现光路折转地要求,同时在保证折转光管的传递精度的基础上,降低了整个光管的加工成本.
- 空间光路折转 /
- 直角屋脊棱镜 /
- 双光楔 /
- 误差分析
Abstract: During the calibration and regulation of star simulator inertial measurementunit equipment, the parameter what is the azimuth angle between emergence beam from star simulator and reflected beam of inertial measurement prism is required. The directions of two beams are opposite and there are some space translation in them. The systems require a space replication light-tube for the measurement of the parameter with one theodolite. A new method was proposed for the design of replication light-tube.the light-tube can make the light pace replicate 180 in the horizontal plane and have a two dimensional translation in the plane perpendicular to the optical axis of the star simulator. Right angle roof prism and rhombic prism were used in the design of the light-tube for the purpose to eliminate the installation error of the tube. A double wedges instrument was designed to improve the accuracy of the light-tube. With the use of double wedges, the light pace could title lightly, so the transfer deviation could be eliminated. Experimental results show that the design can not only meet the requirements of the optical path and guarantee delivery accuracy, but also reduce processing costs of the precise replicated light-tube.
- space light replication /
- right angle roof prism /
- double wedges /
- error analysis

[1]
[2]	Wang Jiaqi, Jin Guang, Yan Changxiang. Orientation error analysis of airborne opto-electric tracking and measuring device[J]. Opt Precision Eng, 2005, 13(2): 105-116. (in Chinese) 王家琪,金光,颜昌翔. 机载光电跟踪测量设备的目标定位误差分析[J]. 光学精密工程, 2005, 13(2): 105-116.
[3]
[4]	Jin Guang, Wang Jiaqi. The three-error axis of theodolite with the utilization of the coordinate to the variation[J]. Opt Precision Eng, 1999, 7(5): 89-94. (in Chinese) 金光, 王家琪. 利用坐标变换推导经纬仪三轴误差[J]. 光学精密工程, 1999, 7(5): 89-94.
[5]	Zhang Minghui, Zhang Xiaoyu, Qiao Yanfeng. Study on vehicle twin-photoelectrical pointing system[J]. Opto-electronic Eng, 2004, 31 (7): 18-23. (in Chinese) 张明慧, 张骁禹, 乔彦峰. 车载双联光电瞄准系统的研究[J]. 光电工程, 2004, 31(7): 18-23.
[6]
[7]	Ou Tonggeng, Chen Zhigao, Yang Boxiong, et al. Operating principle and error source of a new type of ccd photoelectric autocollimator[J]. J Geodesy and Geodynamics, 2007, 27(6): 98-100. (in Chinese) 欧同庚, 陈志高, 杨博雄, 等. CCD光电自准直仪工作原理及误差源分析[J]. 大地测量与地球动力学, 2007, 27(6): 98-100.
[8]
[9]
[10]	Li Yonggang, Shang Qiufang, Zhao Weigong, et al. Research on error measurement method of the replicate light-tube[J]. Journal of Astronautic Metrology and Measurement, 2012, 32(4): 23-29. 李永刚, 商秋芳, 赵伟功, 等. 折转光管误差检测方法的研究[J]. 宇航计测技术, 2012, 32(4): 23-29.
[11]	Cheng Yunpeng, Zhang Kaiyuan, Xu Zhong. Matrix Theory[M]. Xi'an: North Western Polytechnical University Press, 2006: 11-16. (in Chinese) 程云鹏, 张凯院, 徐仲. 矩阵论[M]. 西安: 西北工业大学出版社, 2006: 11-16.

[1]	钟卉. 大视场间隔双焦面成像遥感相机焦面装调 . 红外与激光工程, 2021, 50(2): 20200172-1-20200172-7. doi: 10.3788/IRLA20200172
[2]	李硕丰, 徐文东, 赵成强. 激光三维成像中双光楔扫描参数的确定及优化 . 红外与激光工程, 2020, 49(8): 20190508-1-20190508-7. doi: 10.3788/IRLA20190508
[3]	宋俊儒, 邢辉, 裴景洋, 杨天远, 穆生博. 低温镜头能量集中度测试及其误差分析 . 红外与激光工程, 2019, 48(7): 717007-0717007(7). doi: 10.3788/IRLA201948.0717007
[4]	郝亮, 明名, 吴小霞, 吕天宇, 王洪浩. 地基大口径望远镜库德光路误差建模 . 红外与激光工程, 2019, 48(3): 318001-0318001(6). doi: 10.3788/IRLA201948.0318001
[5]	叶思熔, 江万寿, 李金龙, 刘晓波. 某大视场机载摆扫红外扫描仪几何成像仿真与误差分析 . 红外与激光工程, 2017, 46(4): 420005-0420005(6). doi: 10.3788/IRLA201746.0420005
[6]	常凌颖, 赵俊香, 郑爱国, 杜丹. 基于孔径分割的全斯托克斯测量仪的误差分析 . 红外与激光工程, 2017, 46(10): 1017004-1017004(8). doi: 10.3788/IRLA201772.1017004
[7]	涂晓波, 陈爽, 苏铁, 母金河, 杨富荣. 光腔衰荡光谱技术用于OH浓度测量的误差分析 . 红外与激光工程, 2017, 46(2): 239002-0239002(6). doi: 10.3788/IRLA201746.0239002
[8]	闫勇刚, 邓小玲, 马祥, 欧阳健飞. 人体皮肤彩色视频误差分析及一致性提高 . 红外与激光工程, 2016, 45(S1): 222-226. doi: 10.3788/IRLA201645.S126005
[9]	张海燕, 管建安, 庄馥隆, 汪洋, 陈安森, 龚海梅. 红外焦平面低温形变测试方法及其误差分析 . 红外与激光工程, 2016, 45(5): 504001-0504001(3). doi: 10.3788/IRLA201645.0504001
[10]	朱精果, 李锋, 黄启泰, 李孟麟, 蒋衍, 刘汝卿, 姜成昊, 孟柘. 机载激光雷达双光楔扫描系统设计与实现 . 红外与激光工程, 2016, 45(5): 502001-0502001(5). doi: 10.3788/IRLA201645.0502001
[11]	杨晓杰, 李向军, 刘建军. 石英玻璃太赫兹光学参数测量的误差分析 . 红外与激光工程, 2015, 44(6): 1827-1831.
[12]	薛海建, 郭晓松, 周召发, 魏皖宁. 激光陀螺任意二位置寻北仪及误差分析 . 红外与激光工程, 2015, 44(6): 1784-1789.
[13]	赵英秀, 杨阳, 刘伟. 空间激光通信轨道运动模拟器的设计及定位精度检测 . 红外与激光工程, 2015, 44(S1): 205-212.
[14]	王昊京, 王建立, 吴量, 杨轻云, 王鸣浩. 用空间解析几何法进行天文定位定向的误差分析 . 红外与激光工程, 2015, 44(8): 2364-2374.
[15]	戚二辉, 罗霄, 李明, 郑立功, 张学军. 五棱镜扫描技术检测大口径平面镜的误差分析 . 红外与激光工程, 2015, 44(2): 639-646.
[16]	张刘, 支帅. 双目测量系统目标相对位置误差分析 . 红外与激光工程, 2014, 43(S1): 116-122.
[17]	郭云曾, 杨小军, 杨小君, 贾海妮, 王海涛, 刘锋, 姜志. 旋转双光楔光路引导系统Matlab仿真研究 . 红外与激光工程, 2014, 43(3): 856-860.
[18]	虞林瑶, 魏群, 张天翼, 姜湖海, 贾宏光. 无热化旋转双光楔共形光学系统设计 . 红外与激光工程, 2014, 43(2): 528-534.
[19]	王洋, 颜昌翔, 汪逸群, 高志良. 扫描镜非接触式检测系统的位置误差分析 . 红外与激光工程, 2013, 42(7): 1804-1808.
[20]	赵军丽, 吴易明, 高立民. 直角棱镜棱脊不平度的检测方法 . 红外与激光工程, 2013, 42(1): 228-232.

点击查看大图

计量

文章访问数: 291
HTML全文浏览量: 35
PDF下载量: 131
被引次数: 0

新型高精度空间折转光管的设计方法

1. 中国科学院西安光学精密机械研究所,陕西西安 710119;

2. 中国科学院大学,北京 100049

作者简介:
尹逊龙(1990－),男,硕士生,主要从事光学设计及检测方面的研究.Email:yinxunlong2011@163.com

收稿日期: 2014-03-05
修回日期: 2014-04-10
刊出日期: 2014-11-25

中图分类号: TH74

关键词:

摘要: 星模惯测组合装置在标调过程中,要求测量星模拟器出射光束与惯组棱镜反射光束的方位夹角,两光束不仅方向相反且存在空间平移,为了实现单台经纬仪对该角度的测量,该系统中需要加入特定的折转光管.提出了一种新型的空间转折光管的设计方法,能够实现光路的180折转和垂直于星模拟器光轴的平面内的二维平移,设计中采用了直角屋脊棱镜与斜方棱镜,很好地消除了安装误差;为了消除由于棱镜加工误差带来的折转光管传递偏差,设计中加入双光楔结构.折转光管的光路通过双光楔机构可以发生一定的偏转,该偏转可以抵消折转光管各个部分带来的传递偏差.实验结果表明,该设计方法可以很好的实现光路折转地要求,同时在保证折转光管的传递精度的基础上,降低了整个光管的加工成本.

English Abstract

New design method of precise space replicated light-tube

1. Xi'an Institute of Optics and Precision Mechanics,Chinese Academy of Sciences,Xi'an 710119,China;

2. University of Chinese Academy of Sciences,Beijing 100049,China

Received Date: 2014-03-05
Rev Recd Date: 2014-04-10
Publish Date: 2014-11-25

Keywords:

Abstract: During the calibration and regulation of star simulator inertial measurementunit equipment, the parameter what is the azimuth angle between emergence beam from star simulator and reflected beam of inertial measurement prism is required. The directions of two beams are opposite and there are some space translation in them. The systems require a space replication light-tube for the measurement of the parameter with one theodolite. A new method was proposed for the design of replication light-tube.the light-tube can make the light pace replicate 180 in the horizontal plane and have a two dimensional translation in the plane perpendicular to the optical axis of the star simulator. Right angle roof prism and rhombic prism were used in the design of the light-tube for the purpose to eliminate the installation error of the tube. A double wedges instrument was designed to improve the accuracy of the light-tube. With the use of double wedges, the light pace could title lightly, so the transfer deviation could be eliminated. Experimental results show that the design can not only meet the requirements of the optical path and guarantee delivery accuracy, but also reduce processing costs of the precise replicated light-tube.