Sub-aperture stitching testing technology based on maximum likelihood estimation algorithm
-
摘要: 大口径平面镜作为光学系统的重要组成部分, 其面形精度对系统成像具有重要影响。子孔径拼接检测作为大口径光学平面反射镜检测的常用手段, 子孔径拼接算法是该技术的核心。研究了平面子孔径拼接算法, 基于最大似然估计与正交化Zernike多项式拟合建立了一套合理的拼接算法与数学模型, 基于该算法模型可以有效实现对大口径平面镜的拼接检测, 同时编写了相应的拼接程序, 并利用100 mm干涉仪对120 mm的平面镜进行了拼接检测, 给出了拼接检测与全口径检测的对比结果, 对比结果表明: 拼接所得全孔径相位分布与全口径检测结果的RMS值偏差分别为0.002, 验证了算法的可靠性与准确性。
-
关键词:
- 干涉检测 /
- 子孔径拼接 /
- 最大似然估计 /
- Zernike多项式拟合 /
- 正交化
Abstract: As an important part of the optical system, the accuracy of the plane mirror is an influence factor to system imaging. Subaperture stitching testing is a usual way to test plane mirror in large aperture, while the stitching algorithm is the key in the stitching technology. The plane sub -aperture stitching algorithm was studied in the paper and a reasonable stitching algorithms and mathematical models was established based on maximum likelihood estimation and orthogonalization Zernike polynomial fitting. Stitching to plane mirror in large aperture can be accomplished with the above stitching model. Stitching program was also written and stitching testing was carried on with a 100 mm interferometer on a 120 mm plane mirror. Comparing the stitching result with the full aperture testing result, it shows that the stitching map is in consistent with the full aperture testing map. The difference of RMS between them is 0.002, verifying the reliability and accuracy of the algorithm. -
[1] Chow W W, George N L. A method for sub-aperture testing interferogram reduction[J]. Optics Letters, 1983, 8(9): 468-470. [2] [3] [4] Jon F, Paul E M, Greg W F. An automated subaperture stitching interferometer workstation for spherical and aspherical surfaces[C]//SPIE, 2003, 5188: 296-307. [5] Marc Tricard, Aric Shorey, Bob Hallock, et al. Cost-effective, subaperture approaches to finishing and testing astronomical optics[C]//SPIE, 2006, 6273: 62730L-1-62730L-7. [6] [7] [8] Marc T, Paul D, Greg F. Sub-aperture approaches for asphere polishing and metrology[C]//SPIE, 2005, 5638: 284-299. [9] Wang Q, Chen J B, Zhu R H, et al. A new technique for testing large optical flat[C]//SPIE, 1993, 2003: 389-397. [10] [11] [12] Chen Shanyong. Geometrical approach to subaperture stitching interferometry for aspheric surfaces[D]. Changsha: National University of Defense Technology, 2006. (in Chinese) 陈善勇. 非球面子孔径拼接干涉测量的几何方法研究[D]. 长沙: 国防科学技术大学, 2006. [13] Chen Shanyong, Li Shengyi, Dai Yifan. Iterative algorithm for subaperture stitching interferometry for general surfaces[J]. J Opt Soc Am A, 2005, 22(9): 1929-1936. [14] [15] [16] Dai Guangming. Nonrecursive determination of orthonormal polynomials with matrix formulation[J]. Optics Letters, 2007, 32(1): 74-76. [17] Wang Xiaokun. Research on the technique for testing of aspheric surfaces by sub-aperture stitching interferometry[D]. Beijing: University of Chinese Academy of Sciences, 2008. (in Chinese) 王孝坤. 子孔径拼接干涉检测非球面技术的研究[D]. 北京: 中国科学院大学, 2008. [18] [19] [20] Masashi O, Katsuyuki O, Jumpei T. Measurement of large plane surf ace shapes by connecting small-aperture interferograms[J]. Opt Eng, 1994, 33(20): 608-613. [21] [22] Yan Lisong, Wang Xiaokun, Zheng Ligong, et al. Large-diameter mirror stitching accuracy analysis based on self-test[J]. Infrared and Laser Engineering, 2014, 43(6): 1920-1924. (in Chinese) 闫力松, 王孝坤, 郑立功, 等. 大口径反射镜子孔径拼接自检验精度分析[J]. 红外与激光工程, 2014, 43(6): 1920-1924. [23] [24] Yan Lisong, Wang Xiaokun, Luo Xiao, et al. Sub-aperture stitching testing technology based on triangulation algorithm[J]. Infrared and Laser Engineering, 2012, 42(7): 1793-1797. (in Chinese) 闫力松, 王孝坤, 罗霄, 等. 采用三角剖分算法的子孔径拼接检测技术[J]. 红外与激光工程, 2012, 42(7): 1793-1797. [25] [26] Yan Lisong, Wang Xiaokun, Luo Xiao, et al. Sub-aperture stitching interferometry based on non-ideal standard mirror[J]. Infrared and Laser Engineering, 2014, 43(1): 178-183. (in Chinese) 闫力松, 王孝坤, 罗霄, 等. 基于非理想标准镜的子孔径拼接干涉检测技术研究[J]. 红外与激光工程, 2014, 43(1): 178-183. [27] Peng Su. Absolute measurements of large mirrors[D]. Arizona: The University of Arizona, 2008.
计量
- 文章访问数: 364
- HTML全文浏览量: 48
- PDF下载量: 146
- 被引次数: 0