留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

横向剪切干涉中非共光路误差的识别与补偿

刘丙才 李兵 田爱玲 高芬

刘丙才, 李兵, 田爱玲, 高芬. 横向剪切干涉中非共光路误差的识别与补偿[J]. 红外与激光工程, 2015, 44(8): 2406-2410.
引用本文: 刘丙才, 李兵, 田爱玲, 高芬. 横向剪切干涉中非共光路误差的识别与补偿[J]. 红外与激光工程, 2015, 44(8): 2406-2410.
Liu Bingcai, Li Bing, Tian Ailing, Gao Fen. Compensation and identification of non-common path error in lateral shearing interferometry[J]. Infrared and Laser Engineering, 2015, 44(8): 2406-2410.
Citation: Liu Bingcai, Li Bing, Tian Ailing, Gao Fen. Compensation and identification of non-common path error in lateral shearing interferometry[J]. Infrared and Laser Engineering, 2015, 44(8): 2406-2410.

横向剪切干涉中非共光路误差的识别与补偿

基金项目: 

国家自然科学基金(51275398,51075322);西安工业大学校长基金(XAGDXJJ0903)

详细信息
    作者简介:

    刘丙才(1981-),男,讲师,主要从事光学干涉测量及三维轮廓测量方面的研究。Email:liubingcai@xatu.edu.cn

  • 中图分类号: O436.1

Compensation and identification of non-common path error in lateral shearing interferometry

  • 摘要: 由于相移式横向剪切干涉不需要标准参考波面,因此它可以缩小干涉腔长、甚至实现绝对的共光路干涉,从而最大程度上降低了空气扰动和振动的影响,但实验室设计的相移式横向剪切干涉测量装置中的分束棱镜、剪切平板和五棱镜的制造误差仍然造成了发生错位的两波面间产生非共光路误差。通过剪切干涉测量装置中调整误差和非共光路误差的对比分析,提出了非共光路误差的计算方法,并在测试结果中进行非共光路误差的补偿。实验结果发现补偿非共光路误差后的面形误差与ZYGO干涉仪的测量结果非常接近。
  • [1]
    [2] Steinchen W, Yang L X, Kupfer G, et al. Application of laser diodes in digital speckle pattern shearing interferometry[C]//SPIE, 1998, 3415: 87-94.
    [3] Steinchen W, Yang L X, Kupfer G, et al. Vibration analysis by digital speckle pattern shearing interferometry[C]//SPIE, 1997, 3098: 158-165.
    [4]
    [5]
    [6] Ferraro P, Alferi D, De Nicola S, et al. Quantitative phase-contrast microscopy by a lateral shear approach to digital holographic image reconstruction[J]. Optics Letters, 2006, 31(10): 1405-1407.
    [7] Ferraro P, Alfieri D, De Nicola S, et al. Combining lateral shear interferometry with digital holography for quantitative phase microscopy[C]//SPIE, 2006, 6341:634115-1
    [8]
    [9]
    [10] Ferraro P, Del Core C, Miccio L, et al. Phase map retrieval in digital holography: avoiding the undersampling effect by a lateral shear approach[J]. Optics Letters, 2007, 32(15): 2233-2235.
    [11] Tippur H V. Coherent gradient sensing-a fourier optics analysis and applications to fracture [J]. Applied Optics, 1992, 31(22): 4428-4439.
    [12]
    [13] Tippur HV. Simultaneous and real-time measurement of slope and curvature fringes in thin structures using shearing interferometery[J]. Optical Engineering, 2004, 43(12): 3014-3020.
    [14]
    [15]
    [16] Tippur H V, X Liming. Real-time shearing interferometry for studying interfacial crack tip fields under quasi-static and dynamic loading conditions[C]//SPIE, 1995, 2544: 223-235.
    [17]
    [18] Guo X, Zeng A, Huang H. Spatial phase-shifting lateral shearing interferometer[C]//SPIE, 2009, 7160: 71602D-1.
    [19] Wang Hongjun, Tian Ailing, Wang Jiyuan. The inspection technology of the displacement of shearon the lateral shearing interferomter based on Radon tansform[J]. Optical Technique, 2006, (5): 785-786. (in Chinese)
    [20]
    [21] Liu Bingcai, Tian Ailing, Wang Hongjun, et al. Selection and analysis of shearing displacement in lateral shearing interferometry[J]. Journal of Applied Optics, 2012, (3): 511-514. (in Chinese)
    [22]
    [23] Liu B, Tian A, Wang H, et al. Analysis of asphericity measurement in lateral shearing interferometry[C]//SPIE, 2010, 7522: 75225C-1.
    [24]
    [25] Miyakawa R, Naulleau P, Goldberg K. Analysis of systematic errors in lateral shearing interferometry for EUV optical testing[C]//SPIE, 2009, 7272:72721V-1.
    [26]
    [27] Vidal J, Nicolas J, Campos J. Analysis of the positioning error on lateral shearing surface reconstruction with a Fizeau interferometer[C]//SPIE, 2009,7390: 73900N-1.
    [28]
    [29] Vidal J, Nicolas J, Campos J. New method to improve the accuracy in a sequential lateral shearing interferometer[J]. Optical Engineering, 2011, 50(11): 134-140.
    [30]
    [31] Petzing J N. Vibration analysis using fast speckle metrology[C]//SPIE, 1999. 3745: 134-140.
  • [1] 马铭泽, 何煦, 王金鑫, 罗敬, 徐天晓, 林翠, 周浩然.  离轴三反望远镜主镜和三镜面形误差补偿机理 . 红外与激光工程, 2023, 52(4): 20230053-1-20230053-11. doi: 10.3788/IRLA20230053
    [2] 邹涛, 王丽芬, 任元, 朱挺.  冗余旋转惯导系统两位置初始对准方法 . 红外与激光工程, 2023, 52(1): 20220414-1-20220414-9. doi: 10.3788/IRLA20220414
    [3] 赵洪楠, 江文松, 杨力, 罗哉, 李泓洋.  线激光传感器的边缘偏差修正方法 . 红外与激光工程, 2022, 51(4): 20210317-1-20210317-7. doi: 10.3788/IRLA20210317
    [4] 陈怀宇, 尹达一.  精细导星仪星点定位系统误差的高精度补偿方法 . 红外与激光工程, 2019, 48(11): 1113005-1113005(8). doi: 10.3788/IRLA201948.1113005
    [5] 董浩, 孙拓, 吴丽娜, 唐帅, 刘晓波.  一种机载红外光谱相机的角位置误差补偿技术 . 红外与激光工程, 2019, 48(10): 1013007-1013007(6). doi: 10.3788/IRLA201948.1013007
    [6] 李占利, 周康, 牟琦, 李洪安.  TOF相机实时高精度深度误差补偿方法 . 红外与激光工程, 2019, 48(12): 1213004-1213004(10). doi: 10.3788/IRLA201948.1213004
    [7] 张丽琼, 王劭溥, 胡摇, 郝群.  部分补偿数字莫尔移相干涉的回程误差消除 . 红外与激光工程, 2018, 47(1): 117005-0117005(8). doi: 10.3788/IRLA201847.0117005
    [8] 孙兴伟, 于欣玉, 董祉序, 杨赫然.  激光三角法高精度测量模型 . 红外与激光工程, 2018, 47(9): 906008-0906008(6). doi: 10.3788/IRLA201847.0906008
    [9] 黄民双, 刘晓晨, 马鹏.  脉冲飞行时间激光测距系统中周期误差补偿 . 红外与激光工程, 2018, 47(3): 317004-0317004(5). doi: 10.3788/IRLA201847.0317004
    [10] 胡雄超, 毛晓楠, 吴永康, 闫晓军, 余路伟, 王兆龙.  基于亚像元坐标的像素频率误差补偿方法 . 红外与激光工程, 2017, 46(7): 717006-0717006(6). doi: 10.3788/IRLA201746.0717006
    [11] 王宇飞, 达争尚.  径向剪切干涉波面重构的数值模拟分析 . 红外与激光工程, 2016, 45(3): 317001-0317001(5). doi: 10.3788/IRLA201645.0317001
    [12] 高旭, 万秋华, 李金环, 王玉婷, 逄仁山.  光电轴角编码器莫尔条纹误差信号补偿 . 红外与激光工程, 2015, 44(2): 647-653.
    [13] 劳达宝, 周维虎, 李万红, 石冬, 林心龙.  基于遗传算法的柱面光栅测角技术研究 . 红外与激光工程, 2015, 44(7): 2182-2188.
    [14] 杜亮, 张铁, 戴孝亮.  激光跟踪仪测量距离误差的机器人运动学参数补偿 . 红外与激光工程, 2015, 44(8): 2351-2357.
    [15] 江奇渊, 汤建勋, 袁保伦, 韩松来.  激光陀螺捷联惯导尺寸效应误差分析与补偿 . 红外与激光工程, 2015, 44(4): 1110-1114.
    [16] 宗睿, 林德福, 刘泰然, 兰玲.  采用UKF的光学捷联导引头刻度尺误差补偿方法 . 红外与激光工程, 2014, 43(11): 3577-3584.
    [17] 邓万涛, 汪凯巍, 白剑, 张金春.  高精度子孔径拼接中参考面误差的去除方法 . 红外与激光工程, 2014, 43(4): 1194-1199.
    [18] 于海, 梁立辉, 王树洁, 卢新然, 万秋华.  基于径向基函数神经网络的高精度基准编码器误差补偿 . 红外与激光工程, 2014, 43(12): 4123-4127.
    [19] 高旭, 李俊峰, 张淑梅, 万秋华.  莫尔条纹光电信号细分误差的实时补偿 . 红外与激光工程, 2013, 42(11): 3013-3018.
    [20] 唐圣金, 郭晓松, 周召发, 蒲鹏程.  星点亚像元定位中系统误差的改进补偿方法 . 红外与激光工程, 2013, 42(6): 1502-1507.
  • 加载中
计量
  • 文章访问数:  511
  • HTML全文浏览量:  90
  • PDF下载量:  189
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-12-20
  • 修回日期:  2015-01-13
  • 刊出日期:  2015-08-25

横向剪切干涉中非共光路误差的识别与补偿

    作者简介:

    刘丙才(1981-),男,讲师,主要从事光学干涉测量及三维轮廓测量方面的研究。Email:liubingcai@xatu.edu.cn

基金项目:

国家自然科学基金(51275398,51075322);西安工业大学校长基金(XAGDXJJ0903)

  • 中图分类号: O436.1

摘要: 由于相移式横向剪切干涉不需要标准参考波面,因此它可以缩小干涉腔长、甚至实现绝对的共光路干涉,从而最大程度上降低了空气扰动和振动的影响,但实验室设计的相移式横向剪切干涉测量装置中的分束棱镜、剪切平板和五棱镜的制造误差仍然造成了发生错位的两波面间产生非共光路误差。通过剪切干涉测量装置中调整误差和非共光路误差的对比分析,提出了非共光路误差的计算方法,并在测试结果中进行非共光路误差的补偿。实验结果发现补偿非共光路误差后的面形误差与ZYGO干涉仪的测量结果非常接近。

English Abstract

参考文献 (31)

目录

    /

    返回文章
    返回