用于紫外激光脉冲电光开关的驱动脉冲源

缑永胜; 王大辉; 刘百玉; 赵学庆; 白永林; 朱炳利; 王博; 白晓红; 秦君军; 徐鹏

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

用于紫外激光脉冲电光开关的驱动脉冲源

缑永胜, 王大辉, 刘百玉, 赵学庆, 白永林, 朱炳利, 王博, 白晓红, 秦君军, 徐鹏

文章导航 > 红外与激光工程 > 2015 > 44(9): 2661-2665

缑永胜, 王大辉, 刘百玉, 赵学庆, 白永林, 朱炳利, 王博, 白晓红, 秦君军, 徐鹏. 用于紫外激光脉冲电光开关的驱动脉冲源[J]. 红外与激光工程, 2015, 44(9): 2661-2665.

引用本文:

Gou Yongsheng, Wang Dahui, Liu Baiyu, Zhao Xueqing, Bai Yonglin, Zhu Bingli, Wang Bo, Bai Xiaohong, Qin Junjun, Xu Peng. Driving pulse source for ultraviolet laser pulse electro-optic switch[J]. Infrared and Laser Engineering, 2015, 44(9): 2661-2665.

Citation:

Gou Yongsheng, Wang Dahui, Liu Baiyu, Zhao Xueqing, Bai Yonglin, Zhu Bingli, Wang Bo, Bai Xiaohong, Qin Junjun, Xu Peng. Driving pulse source for ultraviolet laser pulse electro-optic switch[J]. Infrared and Laser Engineering, 2015, 44(9): 2661-2665.

用于紫外激光脉冲电光开关的驱动脉冲源

1.
中国科学院西安光学精密机械研究所条纹相机工程中心,陕西西安 710119;
2.
西北核技术研究所激光与物质相互作用国家重点实验室,陕西西安 710024;
3.
中国科学院大学,北京 100049

基金项目:

国家自然科学基金(11205238);西北核技术研究所激光与物质相互作用重点实验室基金

详细信息

作者简介:
缑永胜(1984-),男,硕士,主要从事超快电脉冲方面的研究。Email:yshgou@163.com

中图分类号: TN78

Driving pulse source for ultraviolet laser pulse electro-optic switch

1.
Streak Camera Center,Xi'an Institute of Optics and Precision Mechanics,Chinese Academy of Sciences,Xi'an 710119,China;
2.
The State Key Laboratory of Laser Interaction with Matter,Northwest Institute of Nuclear Technology,Xi'an 710024,China;
3.
University of Chinese Academy of Sciences,Beijing 100049,China

摘要: 利用雪崩晶体管作为高速开关器件、根据并联充电、串联放电原理设计了一种串并联相结合的MARX电路,以该电路为基础设计了一种低抖动高压脉冲驱动源,并将其应用于紫外激光脉冲的电光开关削波系统。通过同步调节器调节高压驱动脉冲和激光电光系统的时间匹配度,获得了驱动电脉冲与电光开关耦合的最佳工作状态;对匹配过程中的电光开关工作状态以及激光脉冲压缩过程进行了分析和研究,当高压驱动电脉冲幅度为2 690 V,脉宽为7.9 ns时,可以将脉宽为7.1 ns的紫外激光脉冲压缩至2.1 ns,KDP晶体的透光率达到了92.2%,电光开关的效率达到了31.7%。
- MARX电路 /
- 驱动电脉冲 /
- 紫外激光脉冲削波 /
- 电光开关
Abstract: A MARX circuit was designed by connecting the avalanche transistors serially and parallel. A high-voltage pulse driving source with low jitter was developed based on this circuit, and it was applied on a electro-optical switch clipping system of ultraviolet laser pulse. The time matching degree between high-voltage driving pulse and laser electro-optic system was regulated by synchronous regulator to get the best work state of the driving electrical pulses coupling with the electro-optical switch; work state of the electro-optical switch and shaping process of the laser were researched while matching the working time, when the amplitude and pulse width of high-voltage driving pulse was 2 690 V and 7.9 ns, the UV laser pulse with 7.1 ns in pulse width can be compressed to 2.1 ns. Then the transmittance of KDP crystal is 92.2%, and the efficiency of electro-optic switch has reached 31.7%.
- MARX circuit /
- driving pulse /
- UV laser pulse clipping /
- electro-optical switch

[1]	Xiang Shiqing, Dong Jingxing, Mang Yanping, et al. Generation of 2 -10 ns XeCl laser pulses by direct wave clipping with an electro-optical switching [J]. Chinese J Lasers, 1995, A22(9): 675-680. (in Chinese) 向世清, 董景星, 莽燕萍, 等. 电光开关削波产生2-10 ns 准分子激光输出脉冲[J]. 中国激光, 1995, A22(9): 675-680.
[2]
[3]
[4]	Pronko S, Deniz A V. Subnanosecond switching, plasma electrode Pockels cell for high-contrast imaging with partially coherent light [J]. A ppl Opt, 1998, 37(9): 1659-1665.
[5]	Zhang Fangpei, Lou Qihong, Dong Jingxing, et al. Laser induced plasma shutter for wave clipping of 355 nm radiation[J]. Chinese Journal of Lasers, 2007, 34(6): 759-764. (in Chinese) 张芳沛, 楼祺洪, 董景星, 等. 355 nm 脉冲激光诱导等离子体开关削波[J]. 中国激光, 2007, 34(6): 759-764.
[6]
[7]
[8]	Benzel D M, Pocha M D. 1000-V, 300-ps pulse-generation circuit using silicon avalanche devices [J]. Rev Sci Instrum, 1985, 56(7): 1456-1458.
[9]	Kalisz J, Poniecki A, Rozyc K. A simple, precise and low jitter delay/gate generator [J]. Review of Scientific Instruments, 2013, 74(7): 3507-3509.
[10]
[11]
[12]	Bishop A I, Barker P F. Subnanosecond pockels cell switching using avalanche transistors [J]. Review of Scientific Instruments, 2006, 77(4): 044701.
[13]
[14]	Feng Zongming, Gao Ping, Xie Min, et al. Driving system of electro-optical switch with plasma electrodes [J]. High Power Laser and Particle Beams, 2004, 16(9): 1171-1174. (in Chinese) 冯宗明, 高平, 谢敏, 等. 离子体电极电光开关驱动电源系统[J]. 强激光与粒子束, 2004, 16(9): 1171-1174.
[15]	Fan Min, Lu Jingping, Wu Guannv, et al. Investigation of pulse generator driving electro-optical switch with plasma electrodes[J]. High Power Laser and Particle Beams, 1996, 8(1): 112-116. (in Chinese) 范敏,鲁敬平,吴关女, 等. 驱动等离子体电极电光开关脉冲发生器研究[J]. 强激光与粒子束, 1996, 8(1): 112-116.

[1]	蒋衍, 朱精果, 刘汝卿, 李锋, 姜成昊, 孟柘, 王宇. 脉冲激光多回波峰值检测电路设计 . 红外与激光工程, 2023, 52(5): 20220625-1-20220625-8. doi: 10.3788/IRLA20220625
[2]	高德辛, 吕昶见, 吕东明, 于旺, 秦伟平. 面向超短脉冲激光器泵浦源的驱动系统设计及应用 . 红外与激光工程, 2022, 51(4): 20210153-1-20210153-10. doi: 10.3788/IRLA20210153
[3]	杨仕轩, 赵柏秦, 王立晶, 王宁. 采用GaN HEMT的可调窄脉冲激光器驱动电路 . 红外与激光工程, 2022, 51(10): 20220036-1-20220036-8. doi: 10.3788/IRLA20220036
[4]	刘洋, 曹前, 刁新财, 魏志义, 常国庆. 超快光纤激光驱动的长波中红外飞秒脉冲光源（特邀） . 红外与激光工程, 2021, 50(8): 20210368-1-20210368-15. doi: 10.3788/IRLA20210368
[5]	王立晶, 赵柏秦, 杨仕轩. 大电流窄脉冲激光器驱动芯片设计 . 红外与激光工程, 2021, 50(11): 20210034-1-20210034-6. doi: 10.3788/IRLA20210034
[6]	吴涛, 庞涛, 汤玉泉, 孙鹏帅, 张志荣, 徐启铭. 半导体激光器驱动电路设计及环路噪声抑制分析 . 红外与激光工程, 2020, 49(6): 20190386-1-20190386-10. doi: 10.3788/IRLA20190386
[7]	杨银辉, 郑义军, 朱子任, 孙科, 唐化江, 谭荣清, 苏新军. 脉冲气体激光器用固态高压开关的研制 . 红外与激光工程, 2020, 49(11): 20200045-1-20200045-7. doi: 10.3788/IRLA20200045
[8]	冉建, 曹飞, 姜俊, 张兴. 大电流、高稳定脉冲激光器驱动电路设计与数学分析 . 红外与激光工程, 2020, 49(S1): 20200184-20200184. doi: 10.3788/IRLA20200184
[9]	柯常军, 吴天昊, 孔心怡, 钟艳红, 吴谨. 采用小孔等离子体开关实现TE CO₂激光窄脉冲整形 . 红外与激光工程, 2018, 47(12): 1206007-1206007(4). doi: 10.3788/IRLA201847.1206007
[10]	陈杉杉, 张合, 徐孝彬. 激光引信窄脉冲光源驱动电路设计 . 红外与激光工程, 2018, 47(S1): 16-22. doi: 10.3788/IRLA201847.S106004
[11]	李文洁, 赵读亮, 林颖, 梁勖, 方晓东. 高灵敏紫外激光脉冲能量在线检测系统设计 . 红外与激光工程, 2017, 46(12): 1222002-1222002(6). doi: 10.3788/IRLA201746.1222002
[12]	冯文, 颜凡江, 赵梁博, 杨超, 李旭. 基于Marx发生器的快速Q开关驱动电路设计 . 红外与激光工程, 2017, 46(9): 906009-0906009(5). doi: 10.3788/IRLA201746.0906009
[13]	纪亚飞, 赵柏秦, 罗达新. 双波长激光驱动接收专用集成电路设计 . 红外与激光工程, 2016, 45(7): 705004-0705004(8). doi: 10.3788/IRLA201645.0705004
[14]	余兆安, 姚志宏, 梁圣法, 张锦川, 吕铁良. 基于频率补偿的窄脉冲量子级联激光器快速驱动技术 . 红外与激光工程, 2016, 45(2): 206002-0206002(6). doi: 10.3788/IRLA201645.0206002
[15]	李涛, 祝连庆, 刘锋, 张荫民. 基于LDMOS的可调窄脉冲半导体激光器驱动源研究 . 红外与激光工程, 2016, 45(1): 105003-0105003(5). doi: 10.3788/IRLA201645.0105003
[16]	吴红兵, 史云龙, 杜雪, 熊瑞斌, 石松. 电脉冲处理对钛合金超精密切削的影响 . 红外与激光工程, 2016, 45(2): 220002-0220002(4). doi: 10.3788/IRLA201645.0220002
[17]	庄令平, 张雄军, 张君, 郑建刚, 龙蛟, 田晓琳, 郑奎兴, 朱启华. 薄膜电极重频电光开关的热管理 . 红外与激光工程, 2016, 45(9): 921001-0921001(7). doi: 10.3788/IRLA201645.0921001
[18]	纪亚飞, 罗达新, 赵柏秦. 带驱动级的环氧封装脉冲激光二极管 . 红外与激光工程, 2015, 44(S1): 178-182.
[19]	宋立伟, 白亚, 许荣杰, 李闯, 刘鹏, 李儒新, 徐至展. 圆偏振周期量级红外激光脉冲驱动产生太赫兹辐射 . 红外与激光工程, 2014, 43(9): 2925-2928.
[20]	毛佳妮, 陈焕新, 杨亚新, 王小龙, 张恩泉. 脉冲方波驱动强化热电制冷的瞬态特性 . 红外与激光工程, 2013, 42(7): 1835-1841.

点击查看大图

计量

文章访问数: 428
HTML全文浏览量: 63
PDF下载量: 144
被引次数: 0

用于紫外激光脉冲电光开关的驱动脉冲源

1. 中国科学院西安光学精密机械研究所条纹相机工程中心,陕西西安 710119;

2. 西北核技术研究所激光与物质相互作用国家重点实验室,陕西西安 710024;

3. 中国科学院大学,北京 100049

作者简介:
缑永胜(1984-),男,硕士,主要从事超快电脉冲方面的研究。Email:yshgou@163.com

收稿日期: 2015-01-10
修回日期: 2015-02-20
刊出日期: 2015-09-25

基金项目:

国家自然科学基金(11205238);西北核技术研究所激光与物质相互作用重点实验室基金

中图分类号: TN78

关键词:

摘要: 利用雪崩晶体管作为高速开关器件、根据并联充电、串联放电原理设计了一种串并联相结合的MARX电路,以该电路为基础设计了一种低抖动高压脉冲驱动源,并将其应用于紫外激光脉冲的电光开关削波系统。通过同步调节器调节高压驱动脉冲和激光电光系统的时间匹配度,获得了驱动电脉冲与电光开关耦合的最佳工作状态;对匹配过程中的电光开关工作状态以及激光脉冲压缩过程进行了分析和研究,当高压驱动电脉冲幅度为2 690 V,脉宽为7.9 ns时,可以将脉宽为7.1 ns的紫外激光脉冲压缩至2.1 ns,KDP晶体的透光率达到了92.2%,电光开关的效率达到了31.7%。

English Abstract

Driving pulse source for ultraviolet laser pulse electro-optic switch

1. Streak Camera Center,Xi'an Institute of Optics and Precision Mechanics,Chinese Academy of Sciences,Xi'an 710119,China;

2. The State Key Laboratory of Laser Interaction with Matter,Northwest Institute of Nuclear Technology,Xi'an 710024,China;

3. University of Chinese Academy of Sciences,Beijing 100049,China

Received Date: 2015-01-10
Rev Recd Date: 2015-02-20
Publish Date: 2015-09-25

Keywords:

Abstract: A MARX circuit was designed by connecting the avalanche transistors serially and parallel. A high-voltage pulse driving source with low jitter was developed based on this circuit, and it was applied on a electro-optical switch clipping system of ultraviolet laser pulse. The time matching degree between high-voltage driving pulse and laser electro-optic system was regulated by synchronous regulator to get the best work state of the driving electrical pulses coupling with the electro-optical switch; work state of the electro-optical switch and shaping process of the laser were researched while matching the working time, when the amplitude and pulse width of high-voltage driving pulse was 2 690 V and 7.9 ns, the UV laser pulse with 7.1 ns in pulse width can be compressed to 2.1 ns. Then the transmittance of KDP crystal is 92.2%, and the efficiency of electro-optic switch has reached 31.7%.