扫描镜非接触式检测系统的位置误差分析

王洋; 颜昌翔; 汪逸群; 高志良

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

扫描镜非接触式检测系统的位置误差分析

王洋, 颜昌翔, 汪逸群, 高志良

文章导航 > 红外与激光工程 > 2013 > 42(7): 1804-1808

王洋, 颜昌翔, 汪逸群, 高志良. 扫描镜非接触式检测系统的位置误差分析[J]. 红外与激光工程, 2013, 42(7): 1804-1808.

引用本文:

王洋, 颜昌翔, 汪逸群, 高志良. 扫描镜非接触式检测系统的位置误差分析[J]. 红外与激光工程, 2013, 42(7): 1804-1808.

Wang Yang, Yan Changxiang, Wang Yiqun, Gao Zhiliang. Position error analysis on non-contact testing system of scanning mirror[J]. Infrared and Laser Engineering, 2013, 42(7): 1804-1808.

Citation:

Wang Yang, Yan Changxiang, Wang Yiqun, Gao Zhiliang. Position error analysis on non-contact testing system of scanning mirror[J]. Infrared and Laser Engineering, 2013, 42(7): 1804-1808.

扫描镜非接触式检测系统的位置误差分析

1.
中国科学院长春光学精密机械与物理研究所,吉林长春 130033;
2.
中国科学院大学,北京 100049

基金项目:

国家863计划（2011AA12A103）;中国地质调查局工作项目（1212011120227）

详细信息

作者简介:
王洋（1986-），女，博士生，主要从事光学检测方面的研究。Email：wangyang11.17@163.com；颜昌翔（1973-），男，研究员，博士，主要从事空间光学遥感技术方面的研究。Email：yancx@ciomp.an.cn

王洋（1986-），女，博士生，主要从事光学检测方面的研究。Email：wangyang11.17@163.com；颜昌翔（1973-），男，研究员，博士，主要从事空间光学遥感技术方面的研究。Email：yancx@ciomp.an.cn

中图分类号: TH741

Position error analysis on non-contact testing system of scanning mirror

1.
Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;
2.
University of Chinese Academy of Sciences,Beijing 100049,China

摘要: 为了满足非接触式扫描镜检测系统的位置检测精度要求，分析系统各误差源对扫描镜位置检测精度的影响，制定详细的系统总体误差分配方案。分析系统的主要误差源，根据系统相关参数，利用齐次坐标转换法，建立系统引入误差量的数学模型，计算各误差源的误差传递系数；参考误差传递系数，根据加工、装调和检测水平相关数据，应用蒙特卡罗法分析计算，进行误差分配。结果表明，目前的加工、装调能力无法达到该系统的精度要求，提出了一种依据目前的检测水平进行误差分配的方法，最终应用误差补偿实现扫描镜位置检测极限误差优于2.5。采用一字线激光器作为光源，通过0.5莱卡经纬仪和千分表进行检测，达到系统要求的检测精度。
- 扫描镜 /
- 误差分析 /
- 坐标变换 /
- 蒙特卡罗法
Abstract: In order to meet the requirements of the non-contact detection system's position detection accuracy which was applied to detect the movement characteristics of scanning mirror. The analysis on various error sources of the detection system was made and all the errors which affect the position detection accuracy of the scanning mirror were detailed. The mathematical model with errors was set up and the transferring coefficients of the error sources were calculated based on the coordinate transformation method and the relevant parameters of the system. According to the error transferring coefficients and the related data of the current processing and assembly, the calculation of error distribution was given with the Monte Carlo method. The results show that the current processing, assembly capacity can't meet the accuracy requirements of the system, and a new method of the error distribution based on the current detection was put forward. The scanning mirror position detection limits of error was better than 2.5. In order to realize the detection accuracy of the system requirements, the line laser was used as the light source, and the 0.5 Lycra theodolite and micrometer were applied to detect the assembly.
- scanning mirror /
- error analysis /
- coordinate transformation /
- Monte Carlo method

[1]
[2]	Wang Yiqun, Liu Wei, Yan Changxiang. Development of high-precision scanning mirror assembly of imaging spectrometer[J]. Opt and Precision Eng, 2011, 19(11): 2703-2706. (in Chinese)
[3]	Wang Yiqun, Yan Changxiang, Jia Ping. Non-contact position precision detecting method of scanning mirror[J]. Infrared and Laser Engineering, 2012, 41(4): 1057-1060. (in Chinese)
[4]
[5]
[6]	Zhang Guoyu, Jiang Huilin, Xu Xiping, et al. Laser dynamic testing method for swing angle of scanning mirror of infrared earth sensor[J]. Acta Optica Sinica, 2007, 27(5):875-880. (in Chinese)
[7]	Wang Jiaqi, Jin Guang, Yan Changxiang. Orientation error analysis of airborne optoelectric tracking and measuring device[J]. Opt and Precision Eng, 2005, 13(2): 105-116. (in Chinese)
[8]
[9]
[10]	Ming Ming, Wang Jianli. Error budget and analysis for optical system in large telescope[J]. Opt Precision Eng, 2009, 17(1): 104-108. (in Chinese)
[11]
[12]	Chen Hongda, Chen Yonghe, Shi Tingting, et al. Error analysis for focusing mechanism of space camera[J]. Opt and Precision Eng, 2013, 21(5): 1350-1356. (in Chinese)
[13]
[14]	Peng Chen, Chen Qian, Qian Weixian. Method of correcting the static error of infrared search and track system by using photoeletric theodolite[J]. Infrared and Laser Engineering, 2012, 41(10): 2791-2794. (in Chinese)
[15]
[16]	Wang Jiaqi. Optical Instrument Collectivity Design[M]. Changchun: Teaching Material of Department of Graduate of Changchun Institute of Optics, Fine Mechanics and Physics, 1998. (in Chinese)
[17]	Mao Yingtai. Theory of Error and Precision Analysis[M]. Beijing: National Defense Industry Press, 1982. (in Chinese)

[1]	陈阳, 杨延丽, 孙婷婷, 储海荣, 苗锡奎. 直写式激光导引头标定系统误差分析 . 红外与激光工程, 2019, 48(11): 1105007-1105007(8). doi: 10.3788/IRLA201948.1105007
[2]	宋俊儒, 邢辉, 裴景洋, 杨天远, 穆生博. 低温镜头能量集中度测试及其误差分析 . 红外与激光工程, 2019, 48(7): 717007-0717007(7). doi: 10.3788/IRLA201948.0717007
[3]	郝亮, 明名, 吴小霞, 吕天宇, 王洪浩. 地基大口径望远镜库德光路误差建模 . 红外与激光工程, 2019, 48(3): 318001-0318001(6). doi: 10.3788/IRLA201948.0318001
[4]	杨上, 周召发, 刘先一, 张西辉. 基于数字天顶仪的星点图像坐标误差分析 . 红外与激光工程, 2018, 47(7): 726002-0726002(8). doi: 10.3788/IRLA201847.0726002
[5]	金星, 洪延姬, 常浩, 李南雷. 用于激光微烧蚀冲量测量噪声误差的蒙特卡洛分析方法 . 红外与激光工程, 2018, 47(11): 1102002-1102002(7). doi: 10.3788/IRLA201847.1102002
[6]	涂晓波, 陈爽, 苏铁, 母金河, 杨富荣. 光腔衰荡光谱技术用于OH浓度测量的误差分析 . 红外与激光工程, 2017, 46(2): 239002-0239002(6). doi: 10.3788/IRLA201746.0239002
[7]	常凌颖, 赵俊香, 郑爱国, 杜丹. 基于孔径分割的全斯托克斯测量仪的误差分析 . 红外与激光工程, 2017, 46(10): 1017004-1017004(8). doi: 10.3788/IRLA201772.1017004
[8]	叶思熔, 江万寿, 李金龙, 刘晓波. 某大视场机载摆扫红外扫描仪几何成像仿真与误差分析 . 红外与激光工程, 2017, 46(4): 420005-0420005(6). doi: 10.3788/IRLA201746.0420005
[9]	闫勇刚, 邓小玲, 马祥, 欧阳健飞. 人体皮肤彩色视频误差分析及一致性提高 . 红外与激光工程, 2016, 45(S1): 222-226. doi: 10.3788/IRLA201645.S126005
[10]	张海燕, 管建安, 庄馥隆, 汪洋, 陈安森, 龚海梅. 红外焦平面低温形变测试方法及其误差分析 . 红外与激光工程, 2016, 45(5): 504001-0504001(3). doi: 10.3788/IRLA201645.0504001
[11]	杨晓杰, 李向军, 刘建军. 石英玻璃太赫兹光学参数测量的误差分析 . 红外与激光工程, 2015, 44(6): 1827-1831.
[12]	薛海建, 郭晓松, 周召发, 魏皖宁. 激光陀螺任意二位置寻北仪及误差分析 . 红外与激光工程, 2015, 44(6): 1784-1789.
[13]	王昊京, 王建立, 吴量, 杨轻云, 王鸣浩. 用空间解析几何法进行天文定位定向的误差分析 . 红外与激光工程, 2015, 44(8): 2364-2374.
[14]	戚二辉, 罗霄, 李明, 郑立功, 张学军. 五棱镜扫描技术检测大口径平面镜的误差分析 . 红外与激光工程, 2015, 44(2): 639-646.
[15]	张刘, 支帅. 双目测量系统目标相对位置误差分析 . 红外与激光工程, 2014, 43(S1): 116-122.
[16]	杨莉, 吕相银, 金伟, 杨华. 利用坐标变换法计算卫星轨道辐射热流 . 红外与激光工程, 2014, 43(7): 2159-2163.
[17]	曹佃生. 紫外-近红外高光谱探测仪扫描镜拓扑优化设计 . 红外与激光工程, 2014, 43(11): 3813-3819.
[18]	崔凯, 刘朝晖, 李治国, 梁冬生, 袁辉. 坐标变换在空间望远镜视景仿真中的应用 . 红外与激光工程, 2014, 43(2): 557-561.
[19]	崔凯, 刘朝晖, 李治国, 高雄, 谢友金, 王振宇. 坐标变换在空间望远镜误差标定中的应用 . 红外与激光工程, 2014, 43(S1): 151-156.
[20]	薛向尧, 高云国, 张文豹, 张磊. 库德光路光束指向稳定性分析 . 红外与激光工程, 2013, 42(6): 1514-1518.

点击查看大图

计量

文章访问数: 303
HTML全文浏览量: 37
PDF下载量: 115
被引次数: 0

扫描镜非接触式检测系统的位置误差分析

1. 中国科学院长春光学精密机械与物理研究所,吉林长春 130033;

2. 中国科学院大学,北京 100049

作者简介:
王洋（1986-），女，博士生，主要从事光学检测方面的研究。Email：wangyang11.17@163.com；颜昌翔（1973-），男，研究员，博士，主要从事空间光学遥感技术方面的研究。Email：yancx@ciomp.an.cn

王洋（1986-），女，博士生，主要从事光学检测方面的研究。Email：wangyang11.17@163.com；颜昌翔（1973-），男，研究员，博士，主要从事空间光学遥感技术方面的研究。Email：yancx@ciomp.an.cn

收稿日期: 2012-11-04
修回日期: 2012-12-09
刊出日期: 2013-07-25

基金项目:

国家863计划（2011AA12A103）;中国地质调查局工作项目（1212011120227）

中图分类号: TH741

关键词:

摘要: 为了满足非接触式扫描镜检测系统的位置检测精度要求，分析系统各误差源对扫描镜位置检测精度的影响，制定详细的系统总体误差分配方案。分析系统的主要误差源，根据系统相关参数，利用齐次坐标转换法，建立系统引入误差量的数学模型，计算各误差源的误差传递系数；参考误差传递系数，根据加工、装调和检测水平相关数据，应用蒙特卡罗法分析计算，进行误差分配。结果表明，目前的加工、装调能力无法达到该系统的精度要求，提出了一种依据目前的检测水平进行误差分配的方法，最终应用误差补偿实现扫描镜位置检测极限误差优于2.5。采用一字线激光器作为光源，通过0.5莱卡经纬仪和千分表进行检测，达到系统要求的检测精度。

English Abstract

Position error analysis on non-contact testing system of scanning mirror

1. Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;

2. University of Chinese Academy of Sciences,Beijing 100049,China

Received Date: 2012-11-04
Rev Recd Date: 2012-12-09
Publish Date: 2013-07-25

Keywords:

Abstract: In order to meet the requirements of the non-contact detection system's position detection accuracy which was applied to detect the movement characteristics of scanning mirror. The analysis on various error sources of the detection system was made and all the errors which affect the position detection accuracy of the scanning mirror were detailed. The mathematical model with errors was set up and the transferring coefficients of the error sources were calculated based on the coordinate transformation method and the relevant parameters of the system. According to the error transferring coefficients and the related data of the current processing and assembly, the calculation of error distribution was given with the Monte Carlo method. The results show that the current processing, assembly capacity can't meet the accuracy requirements of the system, and a new method of the error distribution based on the current detection was put forward. The scanning mirror position detection limits of error was better than 2.5. In order to realize the detection accuracy of the system requirements, the line laser was used as the light source, and the 0.5 Lycra theodolite and micrometer were applied to detect the assembly.