Optimized tri-wavelength infrared temperature measurement introducing dimensionless model and bending coefficient
-
摘要: 以红外辐射基本理论为基础,将红外温度测量同被测物发射率相分离,构建未涉及发射率的红外三波段测温向量组,解决红外测温结果同发射率耦合度低的问题。进一步优化三波段向量组,提出无量纲发射率模型及适宜波段条件。通过对发射率线性函数进行优化,引入弯曲指数n,拓展发射率函数的应用范围。适宜波段条件的提出则保证了三波段测温向量组结果的精确性。对四个硫化矿样本应用三波段测温法同传统红外测温法进行实验测温对比研究,分析结果表明:三波段测温法同真实温度吻合度较常规红外测量好,且相对误差明显小于传统红外测温,验证了三波段测温法的可用性及精确性。三波段测温法在保证测量精度的同时拓宽了普通单波段红外热像仪的应用范围,保证了硫化矿自燃红外预测数值精度。Abstract: Based on the basic theory of infrared radiation, infrared tri-wavelength vectors group altering low coupling between emissivity and infrared temperature measurement was derived to isolate the object emissivity and infrared temperature measurement. In order to optimize the tri-wavelength vectors group, a non-dimensional emissivity model was established and the most suitable wavelength range was identified. Aiming at optimizing the linear function of emissivity, the bending index n was introduced. The appropriate wavelength range to guarantee exactness of result of tri-wavelength vectors group was presented. The tri-wavelength measurement was demonstrated in a laboratory experiment with four sulfide ore samples. The results show that the fitting of tri-wavelength measurement with true temperature is better than that of common infrared temperature measurement. The fractional error of tri-wavelength measurement significantly is less than the common. The availability and accuracy of tri-wavelength measurement are verified. The tri-wavelength measurement ensures the measurement accuracy as well as expands the scope of common thermal infrared imager application and ensures the numerical accuracy of infrared prediction in the spontaneous combustion of sulfide ores.
-
Key words:
- tri-wavelength /
- emissivity /
- infrared thermometry /
- dimensionless model /
- bending coefficient
-
[1] Yang Zhen, Zhang Shicheng, Yang Li. Altering spectrum method in temperature measurement using infrared imager[J]. Infrared and Laser Engineering, 2012, 41(6):1432-1437.(in Chinese)杨桢, 张士成, 杨立. 变谱法在红外热像仪测温中的应用[J]. 红外与激光工程, 2012, 41(6):1432-1437. [2] [3] [4] Cheng Xiaofang, Fu Tairan, Fan Xueliang. The principle of primary spectrum pyrometry[J]. Science in China Series G, 2004, 34(6):639-647.(in Chinese)程晓舫, 符泰然, 范学良. 谱色测温原理[J]. 中国科学G辑, 2004, 34(6):639-647. [5] [6] Li Yunhong, Ma Rong, Zhang Heng, et al. Dual waveband colori-metric temperature accurate measurement technology[J]. Infrared and Laser Engineering, 2015, 44(1):27-34.(in Chinese)李云红, 马蓉, 张恒, 等. 双波段比色精确测温技术[J]. 红外与激光工程, 2015, 44(1):27-34. [7] Shu Rui, Zhou Yangping, Lu Chunlian. Best detection wavelength bands selection method based on multispectral radiation differenceY[J]. Infrared and Laser Engineering, 2014, 43(8):2506-2512. [8] [9] [10] Cheng Xiaofang, Fu Tairan, Wang Anquan. Tri-waveband method for temperature measurement of the object with monotonic emissivity property[J]. Spectroscopy and Spectral Analysis, 2003, 23(4):641-646.(in Chinese)程晓舫, 符泰然, 王安全. 具有单调发射率表现的三波段温度测量方法[J]. 光谱学与光谱分析, 2003, 23(4):641-646. [11] [12] Yang Zhen, Zhang Shicheng, Yang Li. Infrared temperature measurement technology on lambertian based on the dual temperature and dual-band method[J]. Journal of Engineering Thermophysics, 2013, 34(11):2132-2135.(in Chinese)杨桢, 张士成, 杨立. 基于双温双波段法的郎伯体红外测温技术[J]. 工程热物理学报, 2013, 34(11):2132-2135. [13] Yang Zhen, Zhang Shicheng, Yang Li. Calculation of infrared temperature measurement on non-lambertian objects[J]. Spectroscopy and Spectral Analysis, 2010, 30(8):2093-2098.(in Chinese)杨桢, 张士成, 杨立. 非朗伯体红外测温计算研究[J]. 光谱学与光谱分析, 2010, 30(8):2093-2098. [14] [15] Li Zijun, Shi Dongping, Wu Chao, et al. Infrared thermography for prediction of spontaneous combustion of sulfide ores[J]. Transactions of Nonferrous Metals Society of China, 2012, 22:3095-3101. -
点击查看大图
计量
- 文章访问数: 436
- HTML全文浏览量: 61
- PDF下载量: 491
- 被引次数: 0
下载:
