留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

透射法的红外热波缺陷定量检测研究

华浩然 袁丽华 邬冠华 吴伟

华浩然, 袁丽华, 邬冠华, 吴伟. 透射法的红外热波缺陷定量检测研究[J]. 红外与激光工程, 2016, 45(2): 204007-0204007(6). doi: 10.3788/IRLA201645.0204007
引用本文: 华浩然, 袁丽华, 邬冠华, 吴伟. 透射法的红外热波缺陷定量检测研究[J]. 红外与激光工程, 2016, 45(2): 204007-0204007(6). doi: 10.3788/IRLA201645.0204007
Hua Haoran, Yuan Lihua, Wu Guanhua, Wu Wei. Defect quantitative detection based on transmission infrared thermal wave method[J]. Infrared and Laser Engineering, 2016, 45(2): 204007-0204007(6). doi: 10.3788/IRLA201645.0204007
Citation: Hua Haoran, Yuan Lihua, Wu Guanhua, Wu Wei. Defect quantitative detection based on transmission infrared thermal wave method[J]. Infrared and Laser Engineering, 2016, 45(2): 204007-0204007(6). doi: 10.3788/IRLA201645.0204007

透射法的红外热波缺陷定量检测研究

doi: 10.3788/IRLA201645.0204007
基金项目: 

国家自然科学基金(61261031,51065024);江西省自然科学基金(20151BAB207058)

详细信息
    作者简介:

    华浩然(1988-),男,硕士生,主要从事红外无损检测技术方面的研究。Email:ben-hua@163.com

  • 中图分类号: TN219

Defect quantitative detection based on transmission infrared thermal wave method

  • 摘要: 脉冲红外热波检测是一种新兴的无损检测技术,通常采用反射型激励方式。针对反射法缺陷深度检测误差大的不足,系统分析了透射法的红外脉冲热波定量检测缺陷深度。通过分析材料在脉冲热激励下的一维热传导模型,探讨了缺陷深度的红外测量原理。利用表面温度一阶微分峰值时间法建立特征时间与缺陷深度的关系,实现对缺陷深度的定量检测。以PVC板人工楔形槽缺陷为例,采用透射法与反射法对比实验分析缺陷深度的测量误差。结果表明,反射法在对缺陷进行定量计算时需要选取参考区域,而透射法对数据的处理不依赖参考区域,避免参考区域所带来的误差。透射法直接加热缺陷面,响应时间短,通过求解缺陷处的特征时间计算缺陷深度,检测精度得到大幅度提高。
  • [1] Sun Chunqing, Shi Yu. Numerical simulation of infrared fast defects detection[J]. Journal of Mechanical Electrical Engineering, 2011(3):314-315.(in Chinese)
    [2]
    [3] Ghosh K K, Karbhari V M. Use of infrared thermography for quantitative non-destructive evaluation in FRP strengthened bridge systems[J]. Material and Structures, 2011, 44(1):169-185.
    [4]
    [5]
    [6] Lahiri B B, Bagavathiappan S, Reshmi P R, et al. Quantification of defects in composites and rubber materials using activethermography[J]. Infrared Physics Technology, 2012:191-199.
    [7] Li Guohua, Lin Xiaofeng, Gao Juchun. Numerical simulation of infrared thermographical NDT ofpipeline with internal corrosion[J]. Mining Processing Equipment, 2012(9):118-122.(in Chinese)
    [8]
    [9]
    [10] Zeng Zhi, Tao Ning, Feng Lichun, et al. Effect of defect size on the measurement of defect depth usingthermal wave imaging[J]. Infrared and Laser Engineering, 2012, 41(7):1910-1915.(in Chinese)
    [11] Sun Qingchun. Quantification research for steel and aluminum plate with Infrared detection[D]. Xiangtan:Hunan University of Science and Technology, 2011.(in Chinese)
    [12]
    [13]
    [14] Hsieh C K, Su K U. A methodology of predicting cavity geometry based on scanned surface temperature data-prescribed surface temperature at cavity side[J]. ASME Journal of Heat Transfer, 1980, 102:324-329.
    [15]
    [16] Sahnoun S, Belattar S. Thermal non-destructive testing study of a circular defect in plane structure[J]. British Journal of NDT, 2003(8):115-121.
    [17]
    [18] Sakagami Tkubo S. Applications of pulse heating thermography and lock-in thermography to quantitative non-destructive evaluations[J]. Infrared Physics and Technology, 2002, 43:271-278.
    [19]
    [20] Huo Yan, Zhang Cunlin. Quantitative infrared prediction method for defect depth in carbon fiber reinforced plastics composite[J]. Acta Phys Sinica, 2012, 61(14):144204.(in Chinese)
    [21]
    [22] Li Meihua, Zeng Zhi, Shen Jingling, et al. Numerical simulation of defects depth quantitative measurementin pulsed infrared nondestructive testing[J]. Infrared and Laser Engineering, 2013, 42(4):875-879.(in Chinese)
    [23] Hou Zhenbing, He Shaojie, Li Shuxian. Heat Conduction in Solid[M]. Shanghai:Shanghai Scientific and Technical Publishers, 1984.(in Chinese)
    [24]
    [25] Zhang Xiaochuan. Determination of infrared thermal wave nondestructive testing technology in defect size[D]. Beijing:Capital Normal University, 2006.(in Chinese)
  • [1] 王慧鹏, 翟思聪, 杨洁, 董丽虹, 王海斗.  基于激光热成像的铝合金表面裂纹宽度定量检测 . 红外与激光工程, 2023, 52(9): 20220902-1-20220902-10. doi: 10.3788/IRLA20220902
    [2] 朱强, 周维虎, 陈晓梅, 李冠楠, 石俊凯.  复杂衬底下的涂层厚度定量检测方法研究 . 红外与激光工程, 2022, 51(12): 20220156-1-20220156-10. doi: 10.3788/IRLA20220156
    [3] 卜迟武, 赵博, 刘涛, 张喜斌, 李锐, 唐庆菊.  CFRP/Al蜂窝结构缺陷巴克编码热波检测及匹配滤波 . 红外与激光工程, 2021, 50(10): 20210050-1-20210050-11. doi: 10.3788/IRLA20210050
    [4] 杨正伟, 赵志彬, 高建国, 寇光杰, 张炜.  热固性/热塑性复合材料分层损伤红外热波检测能力评估 . 红外与激光工程, 2021, 50(S2): 20210304-1-20210304-9. doi: 10.3788/IRLA20210304
    [5] 吕嘉明.  利伐沙班的定量检测:拉曼光谱法与远红外吸收光谱法 . 红外与激光工程, 2021, 50(2): 20210038-1-20210038-5. doi: 10.3788/IRLA20210038
    [6] 王震, 杨正伟, 陶胜杰, 朱海波, 张炜.  基于移相技术的含缺陷复合材料锁相热波检测 . 红外与激光工程, 2019, 48(S2): 60-67. doi: 10.3788/IRLA201948.S204002
    [7] 龚金龙, 盖志刚, 解维浩, 刘恩晓, 禹定峰, 刘俊岩, 王扬.  CFRP层板缺陷红外热波雷达成像检测概率研究 . 红外与激光工程, 2017, 46(10): 1004005-1004005(9). doi: 10.3788/IRLA201784.1004005
    [8] 郭伟, 董丽虹, 王海斗, 徐雅薇, 徐滨士.  基于小波分解的热波相位特征提取及喷涂层厚度评价 . 红外与激光工程, 2017, 46(9): 904003-0904003(7). doi: 10.3788/IRLA201746.0904003
    [9] 李永君, 肖俊峰, 朱立春, 张炯, 高斯峰, 唐文书, 南晴.  热障涂层厚度激光透射法红外热波检测技术研究 . 红外与激光工程, 2017, 46(7): 704003-0704003(5). doi: 10.3788/IRLA201746.0704003
    [10] 路广, 李杏华, 肖云龙.  光全散射法在城市扬尘在线监测系统中的应用 . 红外与激光工程, 2016, 45(11): 1118005-1118005(6). doi: 10.3788/IRLA201645.1118005
    [11] 田干, 杨正伟, 朱杰堂, 张炜, 罗文源.  超声红外热波检测中的振动特性及声混沌分析 . 红外与激光工程, 2016, 45(3): 304003-0304003(6). doi: 10.3788/IRLA201645.0304003
    [12] 唐庆菊, 刘俊岩, 王扬, 刘元林, 梅晨.  基于模糊C均值聚类和Canny算子的红外图像边缘识别与缺陷定量检测 . 红外与激光工程, 2016, 45(9): 928001-0928001(5). doi: 10.3788/IRLA201645.0928001
    [13] 张学海, 魏合理.  基于用几何光学和米散射法的球形粒子前向散射特性计算研究 . 红外与激光工程, 2015, 44(5): 1485-1490.
    [14] 周建民, 符正晴, 李鹏, 杨君.  孔洞缺陷的红外无损检测和PNN识别与定量评估 . 红外与激光工程, 2015, 44(4): 1193-1197.
    [15] 王冬冬, 张炜, 金国锋, 杨正伟, 田干.  尖点突变理论在红外热波检测图像分割中的应用 . 红外与激光工程, 2014, 43(3): 1009-1015.
    [16] 李美华, 曾智, 沈京玲, 张存林.  脉冲红外无损检测缺陷深度定量测量的数值模拟 . 红外与激光工程, 2013, 42(4): 875-879.
    [17] 吕事桂, 杨立, 范春利, 王为清.  采用混沌-LM混合解法的材料缺陷单面红外检测定量辨识 . 红外与激光工程, 2013, 42(2): 317-323.
    [18] 张景超, 闫玺, 朱艳英, 李潮洋, 李贺光, 胡学良.  激光双路对称透射法在线测量平板玻璃厚度 . 红外与激光工程, 2013, 42(10): 2812-2816.
    [19] 刘欣, 潘枝峰.  红外光学系统冷反射分析和定量计算方法 . 红外与激光工程, 2012, 41(7): 1684-1688.
    [20] 刘俊岩, 刘 勋, 王 扬, .  线性调频激励的红外热波成像检测技术 . 红外与激光工程, 2012, 41(6): 1416-1422.
  • 加载中
计量
  • 文章访问数:  333
  • HTML全文浏览量:  39
  • PDF下载量:  191
  • 被引次数: 0
出版历程
  • 收稿日期:  2015-06-21
  • 修回日期:  2015-07-19
  • 刊出日期:  2016-02-25

透射法的红外热波缺陷定量检测研究

doi: 10.3788/IRLA201645.0204007
    作者简介:

    华浩然(1988-),男,硕士生,主要从事红外无损检测技术方面的研究。Email:ben-hua@163.com

基金项目:

国家自然科学基金(61261031,51065024);江西省自然科学基金(20151BAB207058)

  • 中图分类号: TN219

摘要: 脉冲红外热波检测是一种新兴的无损检测技术,通常采用反射型激励方式。针对反射法缺陷深度检测误差大的不足,系统分析了透射法的红外脉冲热波定量检测缺陷深度。通过分析材料在脉冲热激励下的一维热传导模型,探讨了缺陷深度的红外测量原理。利用表面温度一阶微分峰值时间法建立特征时间与缺陷深度的关系,实现对缺陷深度的定量检测。以PVC板人工楔形槽缺陷为例,采用透射法与反射法对比实验分析缺陷深度的测量误差。结果表明,反射法在对缺陷进行定量计算时需要选取参考区域,而透射法对数据的处理不依赖参考区域,避免参考区域所带来的误差。透射法直接加热缺陷面,响应时间短,通过求解缺陷处的特征时间计算缺陷深度,检测精度得到大幅度提高。

English Abstract

参考文献 (25)

目录

    /

    返回文章
    返回