留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

采用聚酰胺酸层的高灵敏度长周期光纤光栅温度传感器

安佳 王永杰 李芳 刘元辉 彭丹丹

安佳, 王永杰, 李芳, 刘元辉, 彭丹丹. 采用聚酰胺酸层的高灵敏度长周期光纤光栅温度传感器[J]. 红外与激光工程, 2018, 47(8): 822002-0822002(7). doi: 10.3788/IRLA201847.0822002
引用本文: 安佳, 王永杰, 李芳, 刘元辉, 彭丹丹. 采用聚酰胺酸层的高灵敏度长周期光纤光栅温度传感器[J]. 红外与激光工程, 2018, 47(8): 822002-0822002(7). doi: 10.3788/IRLA201847.0822002
An Jia, Wang Yongjie, Li Fang, Liu Yuanhui, Peng Dandan. Highly sensitive LPG temperature sensor employing polyamic acid-coating[J]. Infrared and Laser Engineering, 2018, 47(8): 822002-0822002(7). doi: 10.3788/IRLA201847.0822002
Citation: An Jia, Wang Yongjie, Li Fang, Liu Yuanhui, Peng Dandan. Highly sensitive LPG temperature sensor employing polyamic acid-coating[J]. Infrared and Laser Engineering, 2018, 47(8): 822002-0822002(7). doi: 10.3788/IRLA201847.0822002

采用聚酰胺酸层的高灵敏度长周期光纤光栅温度传感器

doi: 10.3788/IRLA201847.0822002
基金项目: 

中国科学院战略性先导科技专项(XDA11040201)

详细信息
    作者简介:

    安佳(1992-),女,硕士生,主要从事光纤传感方面的研究。Email:anjia@semi.ac.cn

  • 中图分类号: O439

Highly sensitive LPG temperature sensor employing polyamic acid-coating

  • 摘要: 设计并论证了一种高灵敏度的长周期光纤光栅(LPG)温度传感器。将LPG的包层腐蚀,封装进金属外壳使LPG保持恒定拉力,再密封进盛满聚酰胺酸(PAA)的试管中,其中聚酰胺酸热光系数较大,作为感温材料。测试并讨论了使用不同折射率的聚酰胺酸与不同包层直径的LPG时,LPG共振波长随温度变化的漂移。结果显示,对于一个直径已知的特定LPG,当使用较大折射率的聚酰胺酸时,LPG温度传感器的灵敏度变高。对于使用相同折射率聚酰胺酸的LPG,随着LPG的包层直径减小,LPG温度传感器的灵敏度变高。实验制作的LPG温度传感器的灵敏度为1.26 nm/℃,约为普通LPG制作的传感器的10倍,以及普通FBG制作的传感器的100倍。这种新传感器在2~35℃线性度为99.80%,这提高了传感器的潜在应用,特别是在生物医学检测,海洋监测等这些温度范围接近室温的领域。
  • [1] Liu Chao, Zhang Wen, Dong Mingli, et al. Dual-parameter sensing characterisitics of long period fiber grating cascaded with fiber MZ structure fabricated by CO2 laser[J]. Infrared and Laser Engineering, 2017, 46(9):0922001. (in Chinese)
    [2] Zhou K, Chen X, Zhang L, et al. Implementation of optical chemsensors based on HF-etched fibre Bragg grating structures[J]. Measurement Science Technology, 2006, 17(5):1140.
    [3] Chen G, Zhang W, Webb D J, et al. Enhancing the sensitivity of poly(methyl methacrylate) based optical fiber Bragg grating temperature sensors[J]. Optics Letters, 2015, 40(17):4046-4049.
    [4] Lee C H, Kim M K, Kim K T, et al. Enhanced temperature sensitivity of fiber Bragg grating temperature sensor using thermal expansion of copper tube[J]. Microwave Optical Technology Letters, 2011, 53(7):1669-1671.
    [5] Miao Fei, Zhang Ling, Feng Dejun, et al. Inscription of long period fiber gratings using 800 nm femtosecond laser[J]. Optics and Precision Engineering, 2012, 20(4):685-691. (in Chinese)
    [6] Wang Q, Liu G, Zhang X, et al. Highly sensitive long period fiber grating refractive index sensor based on thin cladding[C]//International Conference on Optoelectronics and Microelectronics. IEEE, 2016:455-460.
    [7] Wang Q, Du C, Zhang J, et al. Sensitivity-enhanced temperature sensor based on PDMS-coated long period fiber grating[J]. Optics Communications, 2016, 377(20):89-93.
    [8] Maheshwary S, Mehra R. Comparison of temperature sensors using polymer materials in long period fiber grating[C]//International Conference on Power Electronics, Intelligent Control and Energy Systems, IEEE, 2016:1-6.
    [9] Tam H Y. Highly sensitive long-period fiber grating temperature sensor[C]//International Symposium on Photonics and Applications. International Society for Optics and Photonics, 2001, 4595:282-286.
    [10] Zhao Q, Qu Y, Wang Y, et al. A novel temperature sensor based on a long period fiber grating with a unique double-cladding layer structure[C]//International Conference on Electronics and Optoelectronics, IEEE, 2011, 3(3-4):V3-281-V3-283.
    [11] Qiu Fengxian, Zhou Yuming, Liu Juzheng, et al. Thermal-optical properties based on the fluorine-containing polyimide[J]. Chinese Journal of Lasers, 2006, 33(2):233-237. (in Chinese)
    [12] Liang Lili, Liu Mingsheng, Li Yan, et al. Solutions of strain and temperature cross-sensitivity of long period fiber grating temperature sensing[J]. Infrared and Laser Engineering, 2015, 44(3):1020-1023. (in Chinese)
  • [1] 雷鸿毅, 张家洪, 张元英, 王新宇, 陈志炎.  铌酸锂晶体结构对电场传感器灵敏度影响分析 . 红外与激光工程, 2023, 52(2): 20220370-1-20220370-8. doi: 10.3788/IRLA20220370
    [2] 柏淼鑫, 金俪阳, 李嘉丽, 柴静, 史磊磊, 朱涛.  基于聚合物微球腔的高灵敏温度传感器(特邀) . 红外与激光工程, 2022, 51(10): 20220535-1-20220535-7. doi: 10.3788/IRLA20220535
    [3] 苏李, 张晓彤, 吕沛桐, 孙铭阳, 王成虎, 陈晨, 张天瑜.  大量程高灵敏度的光纤光栅低频振动传感器研究 . 红外与激光工程, 2020, 49(S2): 20200340-20200340. doi: 10.3788/IRLA20200340
    [4] 杜海伟.  弱场偏振探测技术灵敏度及噪声的定性分析 . 红外与激光工程, 2020, 49(3): 0305006-0305006-7. doi: 10.3788/IRLA202049.0305006
    [5] 何祖源, 刘银萍, 马麟, 杨晨, 童维军.  小芯径多模光纤拉曼分布式温度传感器 . 红外与激光工程, 2019, 48(4): 422002-0422002(7). doi: 10.3788/IRLA201948.0422002
    [6] 赵润晗, 孟欣禹, 赵云鹤, 司晓龙, 刘云启.  消除模间干涉现象的光纤光栅模式转换器 . 红外与激光工程, 2018, 47(12): 1222001-1222001(7). doi: 10.3788/IRLA201847.1222001
    [7] 张法业, 姜明顺, 隋青美, 张雷, 曹玉强, 马国文, 魏钧涛.  基于柔性铰链结构的高灵敏度低频光纤光栅加速度传感器 . 红外与激光工程, 2017, 46(3): 317004-0317004(8). doi: 10.3788/IRLA201746.0317004
    [8] 梁赫西, 代永红, 艾勇, 石倩芸, 周凌林, 单欣.  空间光耦合平衡探测器设计与测试 . 红外与激光工程, 2017, 46(3): 320002-0320002(7).
    [9] 李文超, 何家欢, 李志全, 王亚娟, 冯丹丹, 顾而丹.  新型双通道可选择性SPR光纤传感器的研究 . 红外与激光工程, 2017, 46(3): 322002-0322002(7). doi: 10.3788/IRLA201746.0322002
    [10] 刘超, 张雯, 董明利, 娄小平, 祝连庆.  CO2激光刻写长周期光纤光栅与光纤MZ结构的双参数传感特性 . 红外与激光工程, 2017, 46(9): 922001-0922001(7). doi: 10.3788/IRLA201746.0922001
    [11] 郑华, 郑永秋, 安盼龙, 张婷, 卢晓云, 薛晨阳.  光纤环形谐振腔输入功率波动对谐振式光纤陀螺的影响 . 红外与激光工程, 2016, 45(11): 1122002-1122002(5). doi: 10.3788/IRLA201645.1122002
    [12] 何俊, 徐可欣, 刘蓉, 李晨曦.  近红外漫反射光程对葡萄糖浓度检测灵敏度的影响 . 红外与激光工程, 2016, 45(S1): 29-34. doi: 10.3788/IRLA201645.S104006
    [13] 梁丽丽, 刘明生, 李燕, 李国玉, 杨康.  长周期光纤光栅温度传感器应变交叉敏感的研究 . 红外与激光工程, 2015, 44(3): 1020-1023.
    [14] 邢德胜.  太赫兹波段金属光子晶体光纤增强拉曼散射现象的研究 . 红外与激光工程, 2015, 44(2): 519-522.
    [15] 代永红, 刘彦飞, 周浩天, 单欣, 艾勇.  空间相干光通信中平衡探测器灵敏度测试实验 . 红外与激光工程, 2015, 44(10): 3110-3116.
    [16] 刘耀英, 薛晨阳, 郑华, 安盼龙, 崔晓文, 卢晓云, 刘俊.  高精度环形谐振腔的结构设计及优化 . 红外与激光工程, 2014, 43(11): 3688-3693.
    [17] 彭鹏, 温廷敦, 许丽萍.  一种新结构介观压光型微加速度计 . 红外与激光工程, 2014, 43(10): 3363-3367.
    [18] 朱晓军, 许小梅.  可调谐全正色散掺镱光纤激光器 . 红外与激光工程, 2014, 43(11): 3516-3520.
    [19] 陈海云, 顾铮先, 陈鑫.  倾斜长周期光纤光栅薄膜传感器特性研究 . 红外与激光工程, 2013, 42(11): 3116-3121.
    [20] 杨远洪, 段纬倩, 高丽娟.  反射型保偏光纤温度传感器现场校准方法 . 红外与激光工程, 2012, 41(8): 2107-2111.
  • 加载中
计量
  • 文章访问数:  465
  • HTML全文浏览量:  71
  • PDF下载量:  44
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-03-05
  • 修回日期:  2018-04-03
  • 刊出日期:  2018-08-25

采用聚酰胺酸层的高灵敏度长周期光纤光栅温度传感器

doi: 10.3788/IRLA201847.0822002
    作者简介:

    安佳(1992-),女,硕士生,主要从事光纤传感方面的研究。Email:anjia@semi.ac.cn

基金项目:

中国科学院战略性先导科技专项(XDA11040201)

  • 中图分类号: O439

摘要: 设计并论证了一种高灵敏度的长周期光纤光栅(LPG)温度传感器。将LPG的包层腐蚀,封装进金属外壳使LPG保持恒定拉力,再密封进盛满聚酰胺酸(PAA)的试管中,其中聚酰胺酸热光系数较大,作为感温材料。测试并讨论了使用不同折射率的聚酰胺酸与不同包层直径的LPG时,LPG共振波长随温度变化的漂移。结果显示,对于一个直径已知的特定LPG,当使用较大折射率的聚酰胺酸时,LPG温度传感器的灵敏度变高。对于使用相同折射率聚酰胺酸的LPG,随着LPG的包层直径减小,LPG温度传感器的灵敏度变高。实验制作的LPG温度传感器的灵敏度为1.26 nm/℃,约为普通LPG制作的传感器的10倍,以及普通FBG制作的传感器的100倍。这种新传感器在2~35℃线性度为99.80%,这提高了传感器的潜在应用,特别是在生物医学检测,海洋监测等这些温度范围接近室温的领域。

English Abstract

参考文献 (12)

目录

    /

    返回文章
    返回