留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

天基大口径反射镜支撑技术的发展

张博文 王小勇 赵野 杨佳文

张博文, 王小勇, 赵野, 杨佳文. 天基大口径反射镜支撑技术的发展[J]. 红外与激光工程, 2018, 47(11): 1113001-1113001(9). doi: 10.3788/IRLA201847.1113001
引用本文: 张博文, 王小勇, 赵野, 杨佳文. 天基大口径反射镜支撑技术的发展[J]. 红外与激光工程, 2018, 47(11): 1113001-1113001(9). doi: 10.3788/IRLA201847.1113001
Zhang Bowen, Wang Xiaoyong, Zhao Ye, Yang Jiawen. Progress of support technique of space-based large aperture mirror[J]. Infrared and Laser Engineering, 2018, 47(11): 1113001-1113001(9). doi: 10.3788/IRLA201847.1113001
Citation: Zhang Bowen, Wang Xiaoyong, Zhao Ye, Yang Jiawen. Progress of support technique of space-based large aperture mirror[J]. Infrared and Laser Engineering, 2018, 47(11): 1113001-1113001(9). doi: 10.3788/IRLA201847.1113001

天基大口径反射镜支撑技术的发展

doi: 10.3788/IRLA201847.1113001
基金项目: 

国家重点研发计划(2016YFB0500802)

详细信息
    作者简介:

    张博文(1987-),男,工程师,硕士,主要从事空间遥感器光机结构设计方面的研究。Email:zhangbw508@163.com

  • 中图分类号: TH751.1;V474.2

Progress of support technique of space-based large aperture mirror

  • 摘要: 为了满足人类对地观测和宇宙探索的更高性能要求,空间望远镜反射镜口径已经从米级向十米量级迈进,呈现不断增大的趋势。大口径反射镜支撑与反射镜面形精度和稳定性直接相关,是决定空间望远镜实际观测能力乃至任务成败的关键技术之一。首先对大口径反射镜的三种主要支撑形式进行了介绍并做出适用性比较。在此基础上,从影响反射镜支撑设计的各个因素出发,讨论了反射镜支撑的设计原则。然后结合设计原则的讨论和国内外研究进展对支撑点数量和位置优化、无热化设计、无应力装配设计等大口径反射镜支撑关键技术及发展方向进行了探讨,期望对我国大型空间望远镜的研制提供借鉴,在新一轮空间探索热潮中实现跨越发展。
  • [1] William R Oegerle. ATLAST-9.2 m:a large-aperture deployable space telescope[C]//SPIE 2010, 7731:77312M.
    [2] William R Arnold. Evolving design criteria for very large aperture space-based telescopes and their influence on the need for integrated tools in the optimization process[C]//SPIE, 2015, 9573:95730G.
    [3] Li Zongxuan, Jin Guang, Zhang Lei, et al. Overview and outlook of monolithic primary mirror of spaceborne telescope with 3.5 m aperture[J]. Chinese Optics, 2014, 7(4):532-541. (in Chinese)李宗轩, 金光, 张雷, 等. 3.5 m口径空间望远镜单块式主镜技术展望[J]. 中国光学, 2014,7(4):532-541.
    [4] Zhu Junqing, Sha Wei, Chen Changzheng, et al. Position layout of rear three points mounting for space rectangular mirror[J]. Optics and Precision Engineering, 2015, 23(9):2562-2569. (in Chinese)朱俊青, 沙巍, 陈长征, 等. 空间长条形反射镜背部三支撑点的设置[J]. 光学精密工程, 2015, 23(9):2562-2569.
    [5] Yan Yong, Jia Jiqiang, Jin Guang. Design of new type spaceborne lightweighted primary mirror support[J]. Optics and Precision Engineering, 2008, 16(8):1533-1539. (in Chinese)闫勇, 贾继强, 金光. 新型轻质大口径空间反射镜支撑设计[J]. 光学精密工程, 2008, 16(8):1533-1539.
    [6] Xu Hong, Guan Yingjun. Structural design of 1m diameter space mirror component of space camera[J]. Optics and Precision Engineering, 2013, 21(6):1488-1495. (in Chinese)徐宏, 关英俊. 空间相机1 m口径反射镜组件结构设计[J]. 光学精密工程, 2013, 21(6):1488-1495.
    [7] Yoder P R. Opto-Mechanical Systems Design[M]. Zhou Haixian, Cheng Yunfang, translated. Beijing:China Machine Press, 2008. (in Chinese) Yoder P R. 光机系统设计[M]. 周海宪,程云芳, 译. 北京:机械工业出版社, 2008.
    [8] Zhang Limin, Wang Fugao, An Qichang, et al. Application of Bipod to supporting structure of minitype reflector[J]. Optics and Precision Engineering, 2015, 23(2):438-443. (in Chinese)张丽敏, 王富国, 安其昌, 等. Bipod柔性结构在小型反射镜支撑中的应用[J]. 光学精密工程, 2015, 23(2):438-443.
    [9] Zhou Yuxiang, Shen Xia. Structure design of backside bipod flexure mount for space reflector[J]. Laser Technology, 2017, 41(1):142-145. (in Chinese)周宇翔, 沈霞. 空间反射镜背部双脚架柔性支撑结构设计[J]. 激光技术, 2017, 41(1):142-145.
    [10] Hom C, Irwin J W, Stubbs D M, et al. Design of bipod flexure mounts for the IRIS spectrometer[C]//SPIE, 2013, 8836:88360Q.
    [11] Kaercher Hans J, Peter Eisentraeger, Martin S. Mechanical principles of large mirror supports[C]//SPIE, 2010, 7733:77332O.
    [12] Curtis Baffes, Terry Mast. Primary mirror segmentation studies for the Thirty Meter Telescope[C]//SPIE, 2008, 7018:70180S.
    [13] Cayrel M. E-ELT optomechanics:overview[C]//SPIE, 2012, 8444:84441X.
    [14] Bittner H, Erdmann M, Haberler P. SOFIA primary mirror assembly:structural properties and optical performance[C]//SPIE, 2003, 4857:266-273.
    [15] Sean C Casey. The SOFIA program:astronomers return to the stratosphere[C]//SPIE, 2006, 6267:62670Q.
    [16] Paul Keas, Rick Brewster. SOFIA Telescope modal survey test and test-model correlation[C]//SPIE, 2010, 7738:77380K.
    [17] Charlie Atkinson, Scott Texter. Status of the JWST optical telescope element[C]//SPIE, 2006, 6265:62650T.
    [18] Doyle K B, Genberg V L, Michaels G J. Integrated Optomechanical Analysis[M]. 2nd ed. Lian Huadong, Wang Xiaoyong, Xu Peng, translated. Beijing:National Defense Industry Press, 2015. (in Chinese)凯斯B道尔, 维克托L基恩伯格, 格雷戈里J迈克尔斯. 光机集成分析[M]. 第2版. 连华东, 王小勇, 徐鹏, 译. 北京:国防工业出版社, 2015.
    [19] Nelson J E, Lubliner J, Mast T S. Telescope mirror supports:plate deflection on point supports[C]//SPIE, 1982, 332:212-228.
    [20] Cho M K, Richard R M, Vukobratovich D. Optimum mirror shapes and supports for light weight mirrors subjected to self-weight[C]//SPIE, 1989, 1167:2-19.
    [21] William R Arnold, Matthew Fitagerald, Rubin Jaca Rosa, et al. Next generation lightweight mirror modeling software[C]//SPIE, 2013, 8836:883601.
    [22] William R Arnold, Ryan M Bevan, H Philip Stahl. Integration of mirror design with suspension system using NASA's new mirror modeling software[C]//SPIE, 2013, 8836:88360J.
    [23] William R Arnold. Recent updates to the Arnold Mirror Modeler and integration into the evolving NASA overall design system for large space-based optical systems[C]//SPIE, 2015, 9573:95730H.
    [24] Fan Lei, Yang Hongbo, Zhang Jingxu, et al. Lightweight design for 2 m SiC arch mirror[J]. Opto-Electronic Engineering, 2010, 37(10):71-76. (in Chinese)范磊, 杨洪波, 张景旭, 等. 2 m SiC反射镜拱形轻量化结构设计[J]. 光电工程, 2010, 37(10):71-76.
    [25] Geng Qixian, Yang Hongbo, Li Yanwei. Optimum method of backside support position for large-aperture primary mirror with flat rear surface[J]. Optical Technology, 2007, 33(6):889-895. (in Chinese)耿麒先, 杨洪波, 李延伟. 大口径平背形主镜背部支撑位置优化计算方法[J]. 光学技术, 2007, 33(6):889-895.
    [26] Wang Shuxin, Li Jinglin, Zhang Fan, et al. Optimization of large aperture space reflector based on RSM[J]. Infrared and Laser Engineering, 2013, 42(S2):291-297. (in Chinese)王书新, 李景林, 张帆, 等. 响应面模型的大口径空间反射镜优化[J]. 红外与激光工程, 2013, 42(S2):291-297.
    [27] Ding Ke, Qi Bo, Bian Jiang. Integrated opto-mechanical optimization analysis of large-aperture primary mirror's support position[C]//SPIE, 2016, 9682:968213.
    [28] Wang Kejun, Dong Jihong, Xuan Ming, et al. Compound support structure for large aperture mirror of space remote sensor[J]. Optics and Precision Engineering, 2016, 24(7):1719-1730. (in Chinese)王克军, 董吉洪, 宣明, 等. 空间遥感器大口径反射镜的复合支撑结构[J]. 光学精密工程, 2016, 24(7):1719-1730.
    [29] Lan Bin, Yang Hongbo, Wu Xiaoxia, et al. Optimal design of 620 mm ground mirror assembly[J]. Infrared and Laser Engineering, 2017, 46(1):0118001. (in Chinese)兰斌, 杨洪波, 吴小霞, 等. 620 mm口径地基反射镜组件优化设计[J]. 红外与激光工程, 2017, 46(1):0118001.
    [30] Colin Cunningham, Adrian Russell. Precision engineering for astronomy:historical origins and the future revolution in ground-based astronomy[J]. Phil Trans R Soc A, 2012, 370(1973):3852-3886.
    [31] Gelman A, Maliah E. Mechanism for passive thermal compensation in harsh environment[C]//SPIE, 2007, 6715:671506.
    [32] Virginia Ford, Rick Parks. Passive thermal compensation of the optical bench of the galaxy evolution explorer[C]//SPIE, 2004, 5528:171-180.
    [33] Yan Conglin, Liu Weilin, Wu Qinzhang. Design and analysis on a kind of primary reflector support structure based on thermal compensation principle[C]//SPIE, 2012, 8415:841511.
    [34] Bayar Mete. Lens barrel optomechanical design principles[J]. Optical Engineering, 1981, 20(2):181-186.
    [35] James J Herbert. Techniques for deriving optimal bondlines for athermal bonded mounts[C]//SPIE, 2006, 6288:62880J.
    [36] Christopher Monti. Athermal bonded mounts:Incorporating aspect ratio into a closed-form solution[C]//SPIE, 2007, 6665:666503.
    [37] Guo Junli, An Yuan, Li Zongxuan, et al. Bonding technique of mirror components in space camera[J]. Infrared and Laser Engineering, 2016, 45(3):0313002. (in Chinese)郭骏立, 安源,李宗轩, 等. 空间相机反射镜组件的胶结技术[J]. 红外与激光工程, 2016, 45(3):0313002.
    [38] Yang Liwei, Li Zhilai, Xue Donglin. Analysis and test for effect of structural adhesive shrinkage during curing on mirror surface[J]. Optical Technology, 2014, 40(4):307-312. (in Chinese)杨利伟, 李志来, 薛栋林. 结构胶固化收缩对反射镜面形影响的分析与试验[J]. 光学技术, 2014, 40(4):307-312.
    [39] Dong Deyi, Li Zhilai. Simulation and experiment of influence of adhesive curing on reflective mirror surface[J]. Optics and Precision Engineering, 2014, 22(10):2698-2707. (in Chinese)董得义, 李志来. 胶层固化对反射镜面形影响的仿真与试验[J]. 光学精密工程, 2014, 22(10):2698-2707.
    [40] Doyle K B, Michels G J, Genberg V L. Athermal design of nearly incompressible bonds[C]//SPIE, 2002, 4771:296-303.
    [41] Wang Dong, Yan Yong, Jin Guang. Nonlinear analysis method for predicting optical surface deformations resulted from assembly process[C]//SPIE, 2010, 7654:76540A.
  • [1] 武永见, 杨大伟, 孙欣, 刘涌, 胡永力.  空间光学遥感器精密次镜调整机构设计及试验 . 红外与激光工程, 2023, 52(4): 20220635-1-20220635-7. doi: 10.3788/IRLA20220635
    [2] 于秋跃, 郭文, 王经华, 栗孟娟, 吕天斌, 于长锁, 李依伦, 赵子跃.  光学反射镜CCOS研磨阶段边缘效应控制技术 . 红外与激光工程, 2023, 52(5): 20220711-1-20220711-7. doi: 10.3788/IRLA20220711
    [3] 崔世程, 宋志清, 杨居奎.  C/SiC在大口径空间望远镜次镜承力筒的应用 . 红外与激光工程, 2022, 51(5): 20210710-1-20210710-6. doi: 10.3788/IRLA20210710
    [4] 胡斌, 李创, 相萌, 李亮亮, 戴昊斌, 姚佩, 李旭阳.  可展开空间光学望远镜技术发展及展望 . 红外与激光工程, 2021, 50(11): 20210199-1-20210199-16. doi: 10.3788/IRLA20210199
    [5] 孙熠璇, 罗世魁, 高超, 陈芳, 宗肖颖, 杜建祥, 刘子嘉, 白杰.  大口径空间反射镜的重力卸载优化方法 . 红外与激光工程, 2021, 50(1): 20200103-1-20200103-9. doi: 10.3788/IRLA20200103
    [6] 李小明, 王桂冰, 张立中, 王天宇, 张天硕.  单反式光端机反射镜柔性支撑参数化设计与试验 . 红外与激光工程, 2020, 49(4): 0414003-0414003-7. doi: 10.3788/IRLA202049.0414003
    [7] 张凤芹, 窦莲英, 庞寿成, 李庆林.  空间遥感相机大口径变方位反射镜设计 . 红外与激光工程, 2020, 49(7): 20200008-1-20200008-7. doi: 10.3788/IRLA20200008
    [8] 张超杰, 习兴华, 王永宪, 朱俊青, 关英俊.  空间遥感相机大口径反射镜结构优化设计 . 红外与激光工程, 2020, 49(2): 0214002-0214002. doi: 10.3788/IRLA202049.0214002
    [9] 王小勇, 张博文, 郭崇岭, 刘湃.  3 m口径空间反射镜的参数优化 . 红外与激光工程, 2019, 48(S1): 205-210. doi: 10.3788/IRLA201948.S118002
    [10] 杨维帆, 曹小涛, 张彬, 赵伟国, 林冠宇.  空间望远镜次镜六自由度调整机构精密控制 . 红外与激光工程, 2018, 47(7): 718007-0718007(8). doi: 10.3788/IRLA201847.0718007
    [11] 李诚良, 丁亚林, 刘磊.  大口径反射镜水平集拓扑优化设计 . 红外与激光工程, 2018, 47(9): 918001-0918001(7). doi: 10.3788/IRLA201847.0918001
    [12] 左玉弟, 金光, 谢晓光, 李宗轩, 解鹏.  基于带状弹簧的空间望远镜自展开机构设计 . 红外与激光工程, 2017, 46(5): 518002-0518002(6). doi: 10.3788/IRLA201746.0518002
    [13] 王若秋, 张志宇, 薛栋林, 张学军.  用于空间望远镜的大口径高衍射效率薄膜菲涅尔衍射元件 . 红外与激光工程, 2017, 46(9): 920001-0920001(8). doi: 10.3788/IRLA201746.0920001
    [14] 田士涛, 徐振邦, 秦超, 夏明一, 吴清文.  基于主动约束阻尼层的次镜支撑结构设计 . 红外与激光工程, 2016, 45(11): 1118001-1118001(9). doi: 10.3788/IRLA201645.1118001
    [15] 李红光, 纪明, 寿少俊, 彭富伦, 李磊.  上反射镜式光电系统复合轴稳定机理 . 红外与激光工程, 2016, 45(7): 731001-0731002(7). doi: 10.3788/IRLA201645.0731001
    [16] 王克军, 宣明, 董吉洪, 李威, 张缓缓.  空间遥感器反射镜组件结构设计方法 . 红外与激光工程, 2016, 45(11): 1113001-1113001(11). doi: 10.3788/IRLA201645.1113001
    [17] 王琦, 孙广利, 黎纯宁, 宋江鹏.  基于半捷联方式的反射镜视轴稳定技术 . 红外与激光工程, 2015, 44(10): 3070-3075.
    [18] 伞兵, 李景林, 孙斌.  空间相机大口径反射镜轻量化技术及应用 . 红外与激光工程, 2015, 44(10): 3043-3048.
    [19] 崔凯, 刘朝晖, 李治国, 梁冬生, 袁辉.  坐标变换在空间望远镜视景仿真中的应用 . 红外与激光工程, 2014, 43(2): 557-561.
    [20] 陈洪达, 陈永和, 史婷婷, 刘晓华, 傅雨田.  空间反射镜的轻量化及支撑设计研究 . 红外与激光工程, 2014, 43(2): 535-540.
  • 加载中
计量
  • 文章访问数:  575
  • HTML全文浏览量:  107
  • PDF下载量:  97
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-06-10
  • 修回日期:  2018-07-20
  • 刊出日期:  2018-11-25

天基大口径反射镜支撑技术的发展

doi: 10.3788/IRLA201847.1113001
    作者简介:

    张博文(1987-),男,工程师,硕士,主要从事空间遥感器光机结构设计方面的研究。Email:zhangbw508@163.com

基金项目:

国家重点研发计划(2016YFB0500802)

  • 中图分类号: TH751.1;V474.2

摘要: 为了满足人类对地观测和宇宙探索的更高性能要求,空间望远镜反射镜口径已经从米级向十米量级迈进,呈现不断增大的趋势。大口径反射镜支撑与反射镜面形精度和稳定性直接相关,是决定空间望远镜实际观测能力乃至任务成败的关键技术之一。首先对大口径反射镜的三种主要支撑形式进行了介绍并做出适用性比较。在此基础上,从影响反射镜支撑设计的各个因素出发,讨论了反射镜支撑的设计原则。然后结合设计原则的讨论和国内外研究进展对支撑点数量和位置优化、无热化设计、无应力装配设计等大口径反射镜支撑关键技术及发展方向进行了探讨,期望对我国大型空间望远镜的研制提供借鉴,在新一轮空间探索热潮中实现跨越发展。

English Abstract

参考文献 (41)

目录

    /

    返回文章
    返回