Liu Zhongyu, Zhang Tao, Wang Ping, Wang Tongjun. Topology optimization design for main frame of infrared seeker's stabilization platform[J]. Infrared and Laser Engineering, 2016, 45(2): 218001-0218001(5). doi: 10.3788/IRLA201645.0218001
| Citation:
|
Liu Zhongyu, Zhang Tao, Wang Ping, Wang Tongjun. Topology optimization design for main frame of infrared seeker's stabilization platform[J]. Infrared and Laser Engineering, 2016, 45(2): 218001-0218001(5). doi: 10.3788/IRLA201645.0218001
|
Topology optimization design for main frame of infrared seeker's stabilization platform
- 1.
Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;
- 2.
University of Chinese Academy of Sciences,Beijing 100049,China
- Received Date: 2015-06-05
- Rev Recd Date:
2015-07-10
- Publish Date:
2016-02-25
-
Abstract
In order to improve the dynamic performance of infrared seeker's stabilization platform and diminish the negative effect of vibration environment on the stabilized accuracy and image quality of electro-optical load, a topology optimization based on the variable density theory was studied. In the topology optimization of the main frame of infrared seeker's stabilization platform, the maximum stiffness was taken as an objective function and the volume ratio constraint was taken as response functions by using the software of NX/TOSCA. The stiffness and modal performance of the main frame structure after optimization were analyzed by comparing with experience design. The results show that the mass of the main frame is reduced tremendously by 32.4% under the condition of the improved dynamic performance, the maximum deformation is reduced from 3.2m to 2.8m, and the first order natural frequency is improved from 1567 Hz to 1953 Hz, that is beneficial to the lightweight level of ascension and the performance improved. Finally, the dynamic performance of the main frame is verified by vibration test and stabilized accuracy test, which proved the result of the topology optimization. This topology optimization method will provide help to structure design of the other important parts.
-
References
|
[1]
|
|
|
[2]
|
Zhang Xin, Jia Hongguang. 90off-axis angle infrared optical system of roll-pitch seeker[J]. Infrared and Laser Engineering, 2013, 42(1):143-147.(in Chinese) |
|
[3]
|
Wang Min, Huang Chenggong, Guo Zhenghong, et al. Design and consistency analysis of IR imaging seeker closed-loop injection simulation experiment system[J]. Infrared and Laser Engineering, 2014, 43(10):3211-3216.(in Chinese) |
|
[4]
|
|
|
[5]
|
|
|
[6]
|
Wang Ping, Zhang Guoyu, Liu Jiayan, et al. Topology optimization design for inner frame of airborne electro-optical platform[J]. Journal of Mechanical Engineering, 2014, 50(13):135-141.(in Chinese) |
|
[7]
|
Zhu Jianfeng, Lin Yi, Chen Xiaokai, et al. Structural topology optimization based design of automotive transmission housing structure[J]. Journal of Jilin University(Engineering and Technology Edition), 2013, 43(3):584-589.(in Chinese) |
|
[8]
|
|
|
[9]
|
Li Chang, He Xin, Liu Qiang. Design and topology optimization of space camera frame fabricated by high volume fraction SiC/Al composite material[J]. Infrared and Laser Engineering, 2014, 43(8):2526-2531.(in Chinese) |
|
[10]
|
|
|
[11]
|
|
|
[12]
|
Xu Huayang, Guan Liwen, Wang Liping, et al. Topology optimization for the arm of flight simulator under inertial loads[J]. Journal of Mechanical Engineering, 2014, 50(9):14-23.(in Chinese) |
|
[13]
|
|
|
[14]
|
Mlejnek H P, Len R S. An engineer's approach to optimal material distribution and shape finding computer method in applied mechanic and engineering[J]. Computer Methods in Applied Mechanics and Engineering, 1993, 106(1-2):1-26. |
|
[15]
|
Fang Zifan, Yang Lei, Du Daojia, et al. Research on topology optimization design for support structure[J]. China Mechanical Engineering, 2010, 21(15):1836-1839.(in Chinese) |
-
-
Proportional views
-
DownLoad: