Volume 48 Issue S2
Oct.  2019
Turn off MathJax
Article Contents

Li Xiu, Zhang Biqian, Lu Qi, Ma Minyue, Duan Shujie, Xu Zhanshun. Structural color generation based on grating/colloidal crystal microsphere structure[J]. Infrared and Laser Engineering, 2019, 48(S2): 75-80. doi: 10.3788/IRLA201948.S217002
Citation: Li Xiu, Zhang Biqian, Lu Qi, Ma Minyue, Duan Shujie, Xu Zhanshun. Structural color generation based on grating/colloidal crystal microsphere structure[J]. Infrared and Laser Engineering, 2019, 48(S2): 75-80. doi: 10.3788/IRLA201948.S217002

Structural color generation based on grating/colloidal crystal microsphere structure

doi: 10.3788/IRLA201948.S217002
  • Received Date: 2019-06-10
  • Rev Recd Date: 2019-07-20
  • Publish Date: 2019-09-30
  • A thorough research of the optical properties of structural color generation based on grating/colloidal crystal was reported in terms of structural design, experimental preparation and spectral color rendering performance testing. Around realizing wide color gamut, narrow band gap, high brightness and anisotropic structure photonic crystal color control problems, the color mechanism of grating/colloidal crystal microsphere composite photonic crystals was explored by gravity deposition and vertical deposition.Taking the gravity sedimentation method, when the concentration of the dispersion was 1%, the colloidal microspheres were uniformly attached to the grating. When the concentration of the solution was 5%, the PS beads can be closely arranged, but cannot form a single layer or double. The layer structure would precipitate multiple layers and the grating structure was not observed. With the vertical settlement assembly method, when the concentration of the dispersion liquid was 1%, the assembly effect was not good and a dense structure couldn't be formed. When the solution concentration was 5%, the composite structure was assembled well, and the colloidal crystal was assembled in the grating groove. The spectral performance was tested and its color properties were evaluated, which laid a theoretical and practical foundation for its effective application in the field of anti-counterfeiting printing.
  • [1] Phillips K R, England G T, Sunny S, et al. A colloidoscope of colloid-based porous materials and their uses[J]. Chemical Society Reviews, 2015, 45(2):281-322.
    [2] Kuang M, Wang J, Bao B, et al. Photonic crystals:inkjet printing patterned photonic crystal domes for wide viewing-angle displays by controlling the sliding three phase contact line[J]. Advanced Optical Materials, 2014, 2(1):34-38.
    [3] Shao J, Zhang Y, Fu G, et al. Preparation of monodispersed polystyrene microspheres and self-assembly of photonic crystals for structural colors on polyester fabrics[J]. The Journal of the Textile Institute, 2014, 105(9):938-943.
    [4] Liu G, Zhou L, Zhang G, et al. Study on the binding strength of polystyrene photonic crystals on polyester fabrics[J]. Journal of Materials Science, 2016, 51(19):8953-8964.
    [5] Takeoka Y. Fusion materials for biomimetic structurally colored materials[J]. Polymer Journal, 2015, 47(2):106.
    [6] Liu G, Zhou L, Wu Y, et al. The fabrication of full color P (St-MAA) photonic crystal structure on polyester fabrics by vertical deposition self-assembly[J]. Journal of Applied Polymer Science, 2015, 132(13):4385-4393.
    [7] Cui X, WangY, Jiang G, et al. A photonic crystal-based CdS-Au-WO3 heterostructure for efficient visible-light photocatalytic hydrogen and oxygen evolution dagger[J]. Rsc Advances, 2014, 4(30):15689-15694.
    [8] Fu Q Q, Zhu B T, Ge J P. Hierarchically structured photonic crystals for integrated chemical separation and colorimetric detection[J]. Nanoscale, 2017, 9(7):2457-2463.
    [9] Xie Z, Cao K, Zhao Y, et al. An optical nose chip based on mesoporous colloidal photonic crystal beads[J]. Advanced Materials, 2014, 26(15):2413-2418.
    [10] Zhang Q, Bai L, Liu X, et al. Simplified transparent conductive oxides-based ultrabroadband absorber design[J]. Journal of Lightwave Technology, 2016, 34(4):1354-1359.
    [11] Xuan H Y, Ren J Y, Zhu Y X, et al. Aptamer-functionalized p (NIPAM-AA) hydrogel fabricated one-dimensional photonic crystals (1DPCs) for colorimetric sensing[J]. RSC Advances, 2016, 43(6):36827-36833.
    [12] Xia Jintao, Zhang Chao, Tao Weidong, et al. Study on microstructure of two-photon fabrication and assembly[J].Infrared and Laser Engineering, 2019, 48(3):0306007. (in Chinese)
    [13] Lei Lihua, Cai Xiaoyu, Wei Jiasi, et al. Development and characterization of multi-dimension grid standard template[J]. Infrared and Laser Engineering, 2019, 48(5):0503006. (in Chinese)
    [14] Shen Sitong, Li Yan, Fu Yuegang, et al. Anti-reflection characteristics of the surface of double-cycle nested micro-structures[J]. Infrared and Laser Engineering, 2019, 48(5), 0521002. (in Chinese)
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(585) PDF downloads(39) Cited by()

Related
Proportional views

Structural color generation based on grating/colloidal crystal microsphere structure

doi: 10.3788/IRLA201948.S217002
  • 1. School of Printing and Packaging Engineering,Beijing Institute of Graphic Communication,Beijing 102600,China

Abstract: A thorough research of the optical properties of structural color generation based on grating/colloidal crystal was reported in terms of structural design, experimental preparation and spectral color rendering performance testing. Around realizing wide color gamut, narrow band gap, high brightness and anisotropic structure photonic crystal color control problems, the color mechanism of grating/colloidal crystal microsphere composite photonic crystals was explored by gravity deposition and vertical deposition.Taking the gravity sedimentation method, when the concentration of the dispersion was 1%, the colloidal microspheres were uniformly attached to the grating. When the concentration of the solution was 5%, the PS beads can be closely arranged, but cannot form a single layer or double. The layer structure would precipitate multiple layers and the grating structure was not observed. With the vertical settlement assembly method, when the concentration of the dispersion liquid was 1%, the assembly effect was not good and a dense structure couldn't be formed. When the solution concentration was 5%, the composite structure was assembled well, and the colloidal crystal was assembled in the grating groove. The spectral performance was tested and its color properties were evaluated, which laid a theoretical and practical foundation for its effective application in the field of anti-counterfeiting printing.

Reference (14)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return