Volume 44 Issue 1
Feb.  2015
Turn off MathJax
Article Contents

Xue Jiyuan, Feng Wenlin, Zhao Fen, Yang Xiaozhan. Output characteristic and application for solar panel[J]. Infrared and Laser Engineering, 2015, 44(1): 176-181.
Citation: Xue Jiyuan, Feng Wenlin, Zhao Fen, Yang Xiaozhan. Output characteristic and application for solar panel[J]. Infrared and Laser Engineering, 2015, 44(1): 176-181.

Output characteristic and application for solar panel

  • Received Date: 2014-05-13
  • Rev Recd Date: 2014-06-17
  • Publish Date: 2015-01-25
  • The solar panel is power source in the photovoltaic lighting system, and the output characteristic is a significant factor as assessing energy transformation and maximum power point tracking (MPPT) efficiency. In this paper, the module of the solar panel was built by using Matlab/Simulink, and the equivalent circuit of solar panel was also been simulated accurately. On one hand, the output power firstly increased if the voltage grew, and then decreased if the voltage continually grew. On the other hand, the output power could increase when the temperature decreased or when the intensity of illumination increased. In addition, the voltage at the maximum power would decrease if the number of the paralleled solar panels increased, but the tendency would keep the same when the number of the solar panel was bigger than 3. And the maximum output power would increase with the number of the series'panels increasing. However, the maximum output power would remain unchanged when the number of the panels was more than a certain quantity. This present work can provide theoretical support for building the photovoltaic lighting system.
  • [1] Yan Liyang, Xu Di, Ge Aiming. Novel maximum power point tracking method under non-uniform insolation conditions [J]. Infrarred and Laser Engineering, 2013, 42 (8):2173-2180. (in Chinese)
    [2]
    [3] Wang Hao. A discussion about the relation about solar LED and the development of the city [J]. China Illuminating Journal, 2012, 23(2): 33-36.
    [4]
    [5] Li Jingang, Li Guohua. A study of photovoltaic road lamp system[J]. China Illuminating Journal, 2008, 19(2): 54-57.
    [6]
    [7]
    [8] Sun Yingbo. A study of the independent solar LED illumination system[D]. Jinan: Shandong University, 2010: 7-8.
    [9] Wang Yue, Wang Nianchun, Shi Bin. A study of the solar panel model [J]. Electrical Electronics, 2009, 142 (10): 20-22.
    [10]
    [11]
    [12] Liu Zhuo. Solar LED illumination system [D]. Shanghai: Fudan University, 2010: 32-34.
    [13]
    [14] Li Jiyong, Gong Renxi, Feng Zhaohe. A novel MPPT intelligent multiple method based on constant voltage and fuzzy control applied in photovoltaic power system [J]. Advanced Science Letters, 2012, 11(1): 184-188.
    [15]
    [16] Miao Hongli. The design and realization of photovoltaic road lamp[D]. Qingdao: Ocean University of China, 2007: 10-12.
    [17] Sojoudi M, Madatov R, Sojoudi T. Optimization of efficiency of solar cells by accelerated electron ray to have an optimal and constant energy [J]. International Journal on Technical and Physical Problems of Engineering (IJTPE), 2011, 3(9): 68-71.
    [18]
    [19]
    [20] Nema S, Nema R K, Agnihotri G. Matlab/Simulink based study of photovoltaic cells/modules/array and their experimental verification [J]. International Journal of Energy and Environment, 2010, 1(3): 487-500.
    [21]
    [22] Qiu Dongdong, Wang Rui, Cheng Xiangai, et al. The effect of the ultrashort laser pulse to the monocrystal silicon [J]. Infrared and Laser Engineering, 2012, 41(1): 112-115. (in Chinese)
    [23] Gao Zhigang, Li Yongdong, Sun Min. Compare and analysis several solar panel models [J]. Power Supply Technologies and Applications, 2012, 41(1): 112-115.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(652) PDF downloads(403) Cited by()

Related
Proportional views

Output characteristic and application for solar panel

  • 1. College of Electronic Information and Automation,Chongqing University of Technology,Chongqing 400054,China;
  • 2. College of Optoelectronic Information,Chongqing University of Technology,Chongqing 400054,China;
  • 3. Chongqing Key Laboratory of Time Grating Sensing &Advanced Testing Technology,Chongqing 400054,China

Abstract: The solar panel is power source in the photovoltaic lighting system, and the output characteristic is a significant factor as assessing energy transformation and maximum power point tracking (MPPT) efficiency. In this paper, the module of the solar panel was built by using Matlab/Simulink, and the equivalent circuit of solar panel was also been simulated accurately. On one hand, the output power firstly increased if the voltage grew, and then decreased if the voltage continually grew. On the other hand, the output power could increase when the temperature decreased or when the intensity of illumination increased. In addition, the voltage at the maximum power would decrease if the number of the paralleled solar panels increased, but the tendency would keep the same when the number of the solar panel was bigger than 3. And the maximum output power would increase with the number of the series'panels increasing. However, the maximum output power would remain unchanged when the number of the panels was more than a certain quantity. This present work can provide theoretical support for building the photovoltaic lighting system.

Reference (23)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return