Volume 44 Issue 4
May  2015
Turn off MathJax
Article Contents

Yi Jinqiao, Huang Yong, Liao Honghua, Tan Jianjun, Jiang Shenglin. Pyroelectric infrared sensor and its application in people counting system[J]. Infrared and Laser Engineering, 2015, 44(4): 1186-1192.
Citation: Yi Jinqiao, Huang Yong, Liao Honghua, Tan Jianjun, Jiang Shenglin. Pyroelectric infrared sensor and its application in people counting system[J]. Infrared and Laser Engineering, 2015, 44(4): 1186-1192.

Pyroelectric infrared sensor and its application in people counting system

  • Received Date: 2014-08-05
  • Rev Recd Date: 2014-09-07
  • Publish Date: 2015-04-25
  • People-counting systems for image acquisition are usually complicated and expensive. In this paper, with detailed analysis of the pyroelectric effect and infrared sensor, BISS0001 integrated signal processing chip were chosen to design an amplifier circuit for the RE200B pyroelectric infrared sensor, in order to study its output waveforms under various human movement states. A people-counting system was designed, with double pyroelectric infrared sensors as the signal acquisition unit and a Cortex-M3 microcontroller as the control core, and its main algorithms were researched. The experimental results demonstrate that different body movement states can be accurately characterized using the output waveforms of the RE200B pyroelectric infrared sensor and the movement directions can be precisely distinguished by the people-counting system based on double pyroelectric infrared sensors designed in this paper. Furthermore, the system realizes real-time counting, and can be applied to a wide range of areas including human body detection and counting.
  • [1] Wollmann L R. The thermopile: the commercial infrared detector[J]. Electro-Opt Syst, 1979: 27-74.
    [2]
    [3] Kazuhiko Hashimoto, Tomohiro Tsuruta, Katsuya Morinaka, et al. High performance human information sensor[J]. Sensors and Actuators A, 2000, 79: 46-52.
    [4]
    [5]
    [6] Zhao Chunhua, Xu Yuntao, Ning Chunyu. Design of temperature detection system based on LH878 pyroelectric infrared sensor[J]. Infrared and Laser Engineering, 2013, 42(2): 324-328. (in Chinese) 赵春华, 许云涛, 宁春玉. LHI878热释电红外传感器的体温检测系统设计[J]. 红外 与激光工程, 2013, 42(2): 324-328.
    [7]
    [8] Sun Qiao, Yang Wei, Yu Haiyang, et al. New target location method based on dynamic pyroelectric infrared sensor[J]. Infrared and Laser Engineering, 2012, 41(9): 2288-2292. (in Chinese) 孙乔, 杨卫, 于海洋, 等. 动态下红外热释电传感器的目标定位方法[J]. 红外与激 光工程, 2012, 41(9): 2288-2292.
    [9] Nobuyuki Yoshiike, Koji Arita, Katsuya Morinaka, et al. Human information sensor[J]. Sensors and Actuators A, 1995, 48: 73-78.
    [10]
    [11] Song Zhitang, Feng Songlin, Lin Chenglu, et al. The new technology for improving heat effect of pyroelectric infrared detector [J]. Ceramics International, 2004, 30: 1823-1826.
    [12]
    [13]
    [14] Liu Meidong, Chen Shi, Li Yuanxi, et al. Investigation of ferroelectric thin films uncooled pyroelectric infrared sensors [J]. Instrument Technique and Sensor, 2004(2): 3-4, 28. (in Chinese) 刘梅冬, 陈实, 李元昕, 等. 铁电薄膜热释电非制冷红外传感器研究[J]. 仪表技术 与传感器, 2004(2): 3-4, 28.
    [15]
    [16] Shao Shiping. Recent advances in uncooled pyroelectric infrared detector focal plane array[J]. Infrared and Laser Engineering, 1998, 27 (2): 33-36. (in Chinese) 邵式平. 室温型热释电红外探测器焦平面列阵新进展 [J]. 红外与激光工程, 1998, 27(2): 33-36.
    [17]
    [18] Lee M H, Guo R, Bhalla A S. Pyroelectric sensors[J]. Journal Electroceramics, 1998, 2(4): 229-242.
    [19] Wei Lijun, Tang Dongmei, Xiao Liaoliang. Design and analysis of weak signal processing circuit based on pyroelectric infrared sensor[J]. Instrument Technique and Sensor, 2013(7): 89-91. (in Chinese) 魏丽君, 唐冬梅, 肖辽亮. 基于热释电红外传感器微弱信号处理电路的设计与分析[J]. 仪表技术与传感器, 2013(7): 89-91.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(692) PDF downloads(260) Cited by()

Related
Proportional views

Pyroelectric infrared sensor and its application in people counting system

  • 1. School of Information Engineering,Hubei University for Nationalities,Enshi 445000,China;
  • 2. School of Optical and Electronic Information,Huazhong University of Science and Technology,Wuhan 430074,China

Abstract: People-counting systems for image acquisition are usually complicated and expensive. In this paper, with detailed analysis of the pyroelectric effect and infrared sensor, BISS0001 integrated signal processing chip were chosen to design an amplifier circuit for the RE200B pyroelectric infrared sensor, in order to study its output waveforms under various human movement states. A people-counting system was designed, with double pyroelectric infrared sensors as the signal acquisition unit and a Cortex-M3 microcontroller as the control core, and its main algorithms were researched. The experimental results demonstrate that different body movement states can be accurately characterized using the output waveforms of the RE200B pyroelectric infrared sensor and the movement directions can be precisely distinguished by the people-counting system based on double pyroelectric infrared sensors designed in this paper. Furthermore, the system realizes real-time counting, and can be applied to a wide range of areas including human body detection and counting.

Reference (19)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return