Design of ground-based optical radiation signature measurement system

Han Guangyu; Cao Lihua; Zhang Wenbao

Volume 43 Issue 2

Mar. 2014

Turn off MathJax

Article Contents

Article Navigation > Infrared and Laser Engineering > 2014 > 43(2): 551-556

Han Guangyu, Cao Lihua, Zhang Wenbao. Design of ground-based optical radiation signature measurement system[J]. Infrared and Laser Engineering, 2014, 43(2): 551-556.

Citation:

Han Guangyu, Cao Lihua, Zhang Wenbao. Design of ground-based optical radiation signature measurement system[J]. Infrared and Laser Engineering, 2014, 43(2): 551-556.

Design of ground-based optical radiation signature measurement system

1.
Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China

Received Date: 2013-06-08
Rev Recd Date: 2013-07-13
Publish Date: 2014-02-25

Abstract

The optical signature measurement technology plays an extremely important role in the fields such as missile penetration,optical reconnaissance and operational effect. In order to make better use of infrared radiation characteristics measuring in the optical signature measurement system, it is very necessary to make high-accuracy calibration of the signature measurement system. As requested in developing a certain model ground-based optical signature measurement system, three calibrating methods were discussed and high-accuracy indirect extended source methods were used for calibrating the system. From an overall point of view, the design of tracking and measuring system,blackbody system and large caliber off-axis collimators were explicitly introduced, so the signature measurement system embodied 1 000 mm tracking and measuring facilities,calibration oriented 50-300 ℃ cavity blackbodies as well as 1 100 mm off-axis collimators. Thus the ground-based optical signature measurement system is capable of high-accuracy radiation calibrating and high-accuracy measuring.
- optical signature measurement,
- blackbody,
- off-axis collimator,
- radiation calibration

References

[1]	Xing Qianglin, Tan Qian, Tang Jia. Overview of optical signature measurement systems of USA[J]. Journal of Spacecraft TTC Technology, 2007, 26(1): 7-12. (in Chinese)
[2]
[3]	邢强林, 谭谦, 唐嘉. 美国光学特性测量技术发展情况及特点[J]. 飞行器测控学报, 2007, 26(1): 7-12.
[4]	Tang Jia, Gao Xin. Calibration method for infrared radiation characteristics measuring system of test range[J]. Infrared and Laser Engineering, 2006, 35(S): 266-270. (in Chinese)
[5]	Jiang Jie, Wang Haoyu, Zhang Guangjun, et al. Optical system design for large FOV attitude angle senor[J].Chinese Journal of Scientific Instrument, 2010, 31(1): 68-72. (in Chinese)
[6]
[7]
[8]	Lang Qi, Zou Xin, Wang Wensheng. Design of catadioptric infrared optical system for tank target tracking and recognition[J]. Chinese Journal of Scientific Instrument, 2009, 30(3): 575- 579. (in Chinese)
[9]	唐嘉, 高昕. 靶场红外辐射特性测量系统标定方法研究[J].红外与激光工程, 2006, 35(S): 266-270.
[10]	Hua Zhenbin,Meng Fanbin. Design of measuring system for object infrared radiation intensity[J]. Electro-optic Echnology Application, 2009, 24(2): 10-12. (in Chinese)
[11]	Han Guangyu. Design of opto-mechanical structure of ground optical measurement system[J]. Journal of Electronic Measurement and Instrument, 2013, 27(1): 45-51. (in Chinese)
[12]
[13]
[14]	Che Chicheng, Li Yingcai, Fan Xuewu, et al. Optical design for off-axis two mirror collimator[J]. Optical Technique, 2008, 37(9): 1793-1796. (in Chinese)
[15]	江洁, 王昊予, 张广军, 等. 一种大视场姿态角传感器的光学系统设计[J]. 仪器仪表学报, 2010, 31(1): 68-72.
[16]	He Xu, Wu Guodong, Han Bing. Study of large-diameter, long focal length collimator assemble technical[J]. Optical Technique, 2009, 35(5): 781-787. (in Chinese)
[17]	Ji Xiaohui, Sun Houhuan, Zhou Bifang, et al. Research and design on wild-view collimator[J]. Optical Instruments, 2007, 29(3): 35-40. (in Chinese)
[18]
[19]
[20]	Tian Hailei, Wang Yuefeng, Zhang Wei. Design of the off-axis parabolic reflective infrared collimator[J]. Infrared Technology, 2007, 29(12): 701-703. (in Chinese)
[21]	郎琪, 邹昕, 王文生. 折反式坦克目标跟踪识别红外光学系统设计[J]. 仪器仪表学报, 2009, 30(3): 575- 579.
[22]	Li Xudong, Feng Aiguo, Zhou Xinni, et al. Radiation characteristics of IR target simulator used in field[J]. Journal of Applied Optics, 2010, 31(2): 252-255. (in Chinese)
[23]
[24]	Tong Jingjing, Liu Wenqing, Gao Minguang, et al. Study of radiation calibration based on airborne FTIR spectrometer[J]. Infrared, 2010, 31(12): 12-15. (in Chinese)
[25]	Sun Zhiyuan, Zhu Wei, Qiao Yanfeng, et al. Atmosphere amending research in infrared radiation characteristic measurement[J]. Laser Infrared, 2010, 40(2): 162-165. (in Chinese)
[26]
[27]	华振斌, 孟凡斌. 红外辐射强度测量系统设计[J]. 光电技术应用, 2009, 24(2): 10-12.
[28]	Lei Ping, Ma Na, Qu Weidong, et al. Modeling and measure error analysis for IR radiation peculiarity of aerial target[J]. Electro-optic Technology Application, 2009, 24(5): 73-76. (in Chinese)
[29]	Lu Yuan, Ling Yongshun, Wu Hanping, et al. Study on passive distance measurement of ground objects by infrared radiation[J]. Infrared Millim Waves, 2004, 23(1): 77-80. (in Chinese)
[30]
[31]
[32]	韩光宇. 地基光学特性测量系统光机结构设计[J]. 电子测量与仪器学报, 2013, 27(1): 45-51.
[33]
[34]
[35]	车驰骋, 李英才, 樊学武, 等. 离轴二镜平行光管的光学设计[J]. 光子学报, 2008, 37(9): 1793-1796.
[36]
[37]
[38]	何煦, 吴国栋, 韩冰. 大口径、长焦距平行光管装调技术研究[J]. 光学技术, 2009, 35(5): 781-787.
[39]
[40]
[41]	吉小辉, 孙后环, 周必方, 等. 大视场平行光管的研究与设计[J]. 光学仪器, 2007, 29(3): 35-40.
[42]
[43]
[44]	田海雷, 汪岳峰, 张伟. 离轴抛物面反射式红外平行光管设计[J]. 红外技术, 2007, 29(12): 701-703.
[45]
[46]
[47]	李旭东, 冯爱国, 周新妮, 等. 外场用红外目标模拟器辐射特性测量研究[J]. 应用光学, 2010, 31(2): 252-255.
[48]
[49]
[50]	童晶晶, 刘文清, 高闽光, 等. 基于机载FTIR的辐射定标研究[J]. 红外, 2010, 31(12): 12-15.
[51]
[52]
[53]	孙志远, 朱玮, 乔彦峰, 等. 红外辐射特性测量中环境影响的修正研究[J]. 激光与红外, 2010, 40(2): 162-165.
[54]
[55]
[56]	雷萍, 马娜, 曲卫东, 等. 空中目标红外辐射特性建模与测量误差分析[J]. 光电技术应用, 2009, 24(5): 73-76.
[57]
[58]
[59]	路远, 凌永顺, 吴汉平, 等. 地面目标的红外被动测距研究[J]. 红外与毫米波学报, 2004, 23(1): 77-80.

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views(399) PDF downloads(166) Cited by()

Proportional views

Design of ground-based optical radiation signature measurement system

1. Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China

Received Date: 2013-06-08

Rev Recd Date: 2013-07-13

Publish Date: 2014-02-25

Key words:

Abstract: The optical signature measurement technology plays an extremely important role in the fields such as missile penetration,optical reconnaissance and operational effect. In order to make better use of infrared radiation characteristics measuring in the optical signature measurement system, it is very necessary to make high-accuracy calibration of the signature measurement system. As requested in developing a certain model ground-based optical signature measurement system, three calibrating methods were discussed and high-accuracy indirect extended source methods were used for calibrating the system. From an overall point of view, the design of tracking and measuring system,blackbody system and large caliber off-axis collimators were explicitly introduced, so the signature measurement system embodied 1 000 mm tracking and measuring facilities,calibration oriented 50-300 ℃ cavity blackbodies as well as 1 100 mm off-axis collimators. Thus the ground-based optical signature measurement system is capable of high-accuracy radiation calibrating and high-accuracy measuring.

HTML

Reference (59)

[1]	Xing Qianglin, Tan Qian, Tang Jia. Overview of optical signature measurement systems of USA[J]. Journal of Spacecraft TTC Technology, 2007, 26(1): 7-12. (in Chinese)
[2]
[3]	邢强林, 谭谦, 唐嘉. 美国光学特性测量技术发展情况及特点[J]. 飞行器测控学报, 2007, 26(1): 7-12.
[4]	Tang Jia, Gao Xin. Calibration method for infrared radiation characteristics measuring system of test range[J]. Infrared and Laser Engineering, 2006, 35(S): 266-270. (in Chinese)
[5]	Jiang Jie, Wang Haoyu, Zhang Guangjun, et al. Optical system design for large FOV attitude angle senor[J].Chinese Journal of Scientific Instrument, 2010, 31(1): 68-72. (in Chinese)
[6]
[7]
[8]	Lang Qi, Zou Xin, Wang Wensheng. Design of catadioptric infrared optical system for tank target tracking and recognition[J]. Chinese Journal of Scientific Instrument, 2009, 30(3): 575- 579. (in Chinese)
[9]	唐嘉, 高昕. 靶场红外辐射特性测量系统标定方法研究[J].红外与激光工程, 2006, 35(S): 266-270.
[10]	Hua Zhenbin,Meng Fanbin. Design of measuring system for object infrared radiation intensity[J]. Electro-optic Echnology Application, 2009, 24(2): 10-12. (in Chinese)
[11]	Han Guangyu. Design of opto-mechanical structure of ground optical measurement system[J]. Journal of Electronic Measurement and Instrument, 2013, 27(1): 45-51. (in Chinese)
[12]
[13]
[14]	Che Chicheng, Li Yingcai, Fan Xuewu, et al. Optical design for off-axis two mirror collimator[J]. Optical Technique, 2008, 37(9): 1793-1796. (in Chinese)
[15]	江洁, 王昊予, 张广军, 等. 一种大视场姿态角传感器的光学系统设计[J]. 仪器仪表学报, 2010, 31(1): 68-72.
[16]	He Xu, Wu Guodong, Han Bing. Study of large-diameter, long focal length collimator assemble technical[J]. Optical Technique, 2009, 35(5): 781-787. (in Chinese)
[17]	Ji Xiaohui, Sun Houhuan, Zhou Bifang, et al. Research and design on wild-view collimator[J]. Optical Instruments, 2007, 29(3): 35-40. (in Chinese)
[18]
[19]
[20]	Tian Hailei, Wang Yuefeng, Zhang Wei. Design of the off-axis parabolic reflective infrared collimator[J]. Infrared Technology, 2007, 29(12): 701-703. (in Chinese)
[21]	郎琪, 邹昕, 王文生. 折反式坦克目标跟踪识别红外光学系统设计[J]. 仪器仪表学报, 2009, 30(3): 575- 579.
[22]	Li Xudong, Feng Aiguo, Zhou Xinni, et al. Radiation characteristics of IR target simulator used in field[J]. Journal of Applied Optics, 2010, 31(2): 252-255. (in Chinese)
[23]
[24]	Tong Jingjing, Liu Wenqing, Gao Minguang, et al. Study of radiation calibration based on airborne FTIR spectrometer[J]. Infrared, 2010, 31(12): 12-15. (in Chinese)
[25]	Sun Zhiyuan, Zhu Wei, Qiao Yanfeng, et al. Atmosphere amending research in infrared radiation characteristic measurement[J]. Laser Infrared, 2010, 40(2): 162-165. (in Chinese)
[26]
[27]	华振斌, 孟凡斌. 红外辐射强度测量系统设计[J]. 光电技术应用, 2009, 24(2): 10-12.
[28]	Lei Ping, Ma Na, Qu Weidong, et al. Modeling and measure error analysis for IR radiation peculiarity of aerial target[J]. Electro-optic Technology Application, 2009, 24(5): 73-76. (in Chinese)
[29]	Lu Yuan, Ling Yongshun, Wu Hanping, et al. Study on passive distance measurement of ground objects by infrared radiation[J]. Infrared Millim Waves, 2004, 23(1): 77-80. (in Chinese)
[30]
[31]
[32]	韩光宇. 地基光学特性测量系统光机结构设计[J]. 电子测量与仪器学报, 2013, 27(1): 45-51.
[33]
[34]
[35]	车驰骋, 李英才, 樊学武, 等. 离轴二镜平行光管的光学设计[J]. 光子学报, 2008, 37(9): 1793-1796.
[36]
[37]
[38]	何煦, 吴国栋, 韩冰. 大口径、长焦距平行光管装调技术研究[J]. 光学技术, 2009, 35(5): 781-787.
[39]
[40]
[41]	吉小辉, 孙后环, 周必方, 等. 大视场平行光管的研究与设计[J]. 光学仪器, 2007, 29(3): 35-40.
[42]
[43]
[44]	田海雷, 汪岳峰, 张伟. 离轴抛物面反射式红外平行光管设计[J]. 红外技术, 2007, 29(12): 701-703.
[45]
[46]
[47]	李旭东, 冯爱国, 周新妮, 等. 外场用红外目标模拟器辐射特性测量研究[J]. 应用光学, 2010, 31(2): 252-255.
[48]
[49]
[50]	童晶晶, 刘文清, 高闽光, 等. 基于机载FTIR的辐射定标研究[J]. 红外, 2010, 31(12): 12-15.
[51]
[52]
[53]	孙志远, 朱玮, 乔彦峰, 等. 红外辐射特性测量中环境影响的修正研究[J]. 激光与红外, 2010, 40(2): 162-165.
[54]
[55]
[56]	雷萍, 马娜, 曲卫东, 等. 空中目标红外辐射特性建模与测量误差分析[J]. 光电技术应用, 2009, 24(5): 73-76.
[57]
[58]
[59]	路远, 凌永顺, 吴汉平, 等. 地面目标的红外被动测距研究[J]. 红外与毫米波学报, 2004, 23(1): 77-80.

Design of ground-based optical radiation signature measurement system

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Related

Proportional views