常帅, 高秀伟, 佟首峰, 宋延嵩, 董岩. 红外辐射式干扰弹能量测量装置研究[J]. 红外与激光工程, 2016, 45(1): 117002-0117002(5). DOI: 10.3788/IRLA201645.0117002
引用本文: 常帅, 高秀伟, 佟首峰, 宋延嵩, 董岩. 红外辐射式干扰弹能量测量装置研究[J]. 红外与激光工程, 2016, 45(1): 117002-0117002(5). DOI: 10.3788/IRLA201645.0117002
Chang Shuai, Gao Xiuwei, Tong Shoufeng, Song Yansong, Dong Yan. Power measurement device of jamming bomb based on infrared radiation[J]. Infrared and Laser Engineering, 2016, 45(1): 117002-0117002(5). DOI: 10.3788/IRLA201645.0117002
Citation: Chang Shuai, Gao Xiuwei, Tong Shoufeng, Song Yansong, Dong Yan. Power measurement device of jamming bomb based on infrared radiation[J]. Infrared and Laser Engineering, 2016, 45(1): 117002-0117002(5). DOI: 10.3788/IRLA201645.0117002

红外辐射式干扰弹能量测量装置研究

Power measurement device of jamming bomb based on infrared radiation

  • 摘要: 为了实现对干扰弹能量及特性的非接触式测量,开展了基于红外辐射式干扰弹能量测量装置研究。首先,针对干扰弹的能量和辐射的波段等特点进行了总结和提炼;接着,确定了用红外辐射能量的量级来表征干扰弹的能量及其特性;然后,在以上的理论基础上,对红外辐射的能量测量进行仿真和研制,包括探测器的选取与应用设计,模拟信号处理和数字信号的处理,采用相关测量方法对能量进行检测以及计算。最后,介绍了红外测量装置的具体实现方法以及优势。实验结果表明:红外辐射能量测量装置的响应时间小于2.5 ms;探测灵敏度优于2.5108 cmHz1/2W-1。基于红外辐射式的能量测量系统成功实现了对1~21 m的长波红外能量的准确测量,且具有较高的灵敏度和较低的相应时间。

     

    Abstract: In order to realize the non-contact measurement of the energy and the characteristics of jamming bomb, the research on energy measurement device based on infrared radiation type jamming bomb was carried out. Firstly, jamming energy and radiation characteristics of the band were summarized; then, the energy and characterization were characterized with infrared radiation energy level; and then, based on the above theory, energy measurement of infrared radiation was simulated and developed, including choosing and apply design of detectors, analogue signal processing and digital signal processing, detecting and calculating energy with relative detecting methods. At last, the specific realization methods and advantages of the infrared measuring device were introduced. The experiment result shows that the response time of the infrared radiation energy measurement device is less than 2.5 ms, and detection sensitivity is better than 2.5108 cmHz1/2W-1. Energy measurement system based on infrared radiation type successfully implements the accurate measurement of long wave infrared energy to the 1-21 m with higher sensitivity and lower response time.

     

/

返回文章
返回