Abstract: Aiming at the non-interference phase retrieval technique based on Transport of Intensity Equation (TIE), which requires that the light source be monochromatic, and the mechanical error caused by moving CCD or object in the intensity acquisition process, a dispersion phase retrieval technique suitable for the lens model was proposed. The method was based on the phase transformation characteristic of the lens imaging system, and combined the dispersion with the TIE so that different wavelengths of light were imaged at the same position after passing through the lens system, thereby obtaining the focus and defocus intensity images without mechanical movement. Then, phase information of an object was calculated from the TIE by combining the relationship between the defocus amount and the wavelength. In this simulation, the correlation coefficient between the phase recovered by this method and the original phase is 0.970 7, and the RMSE is 0.061 8. At the same time, the phase of the lens array was restored by real experiment. The error between the experimental result and the real parameter is 1.74%, which proves the correctness and effectiveness of the proposed method.