邹前进, 陈前荣, 黄振宇, 李华, 黄成功, 亓凤杰, 王彦斌. 激光干扰CCD规律圆形条纹作用机理分析[J]. 红外与激光工程, 2013, 42(8): 2017-2021.
引用本文: 邹前进, 陈前荣, 黄振宇, 李华, 黄成功, 亓凤杰, 王彦斌. 激光干扰CCD规律圆形条纹作用机理分析[J]. 红外与激光工程, 2013, 42(8): 2017-2021.
Zou Qianjin, Chen Qianrong, Huang Zhenyu, Li Hua, Huang Chenggong, Qi Fengjie, Wang Yanbin. Mechanism analysis of regular concentric rings on laser disturbing CCD detector[J]. Infrared and Laser Engineering, 2013, 42(8): 2017-2021.
Citation: Zou Qianjin, Chen Qianrong, Huang Zhenyu, Li Hua, Huang Chenggong, Qi Fengjie, Wang Yanbin. Mechanism analysis of regular concentric rings on laser disturbing CCD detector[J]. Infrared and Laser Engineering, 2013, 42(8): 2017-2021.

激光干扰CCD规律圆形条纹作用机理分析

Mechanism analysis of regular concentric rings on laser disturbing CCD detector

  • 摘要: 在内场31.5 m的距离进行了YAG脉冲激光干扰CCD成像系统实验,首次出现了规律性圆形条纹。通过对实验过程、圆形条纹中心相对强度分布和成像特性结果分析,确定规律性圆形条纹产生的条件稳定,且是光学系统固有的;规律性圆形条纹与干扰亮斑成像特性不同。针对可能产生规律性圆形条纹的多种衍射和干涉,结合圆形条纹中心亮斑大小、圆形条纹位置分布、圆形条纹相对强度分布、成像特性和产生的可能性,进行了理论分析和实验结果对比。研究结果表明:实验中规律性圆形条纹为光学系统胶合透镜上下表面反射激光所产生的等厚干涉条纹。

     

    Abstract: The concentric rings were reported for the first time when 532 nm YAG pulsed laser interfered CCD imaging system at the distance of 31.5 m under infield. According to analysis of experimental process, relative intensity distribution of concentric rings and imaging properties of CCD system, the generation conditions of concentric rings were found to be stable and inherent to the optical system.Meanwhile, the imaging properties of the concentric rings and laser spot were different. Aiming at various diffractions and interferences of the CCD optical system, the theory analysis and contrast of experimental results were done by combining with central spot size, positional distribution, relative intensity distribution, imaging properties and occurring probability of concentric rings in this paper. The results indicate that the concentric rings are formed from equal thickness interference of reflected laser between the top and bottom surface of the optical system cemented lens.

     

/

返回文章
返回