[1]
|
Dai Shixun, Chen Huiguang, Li Maozhong, et al. Chalcogenide glasses and their infrared optical applications[J]. Infrared and Laser Engineering, 2012, 41(4):847-852.(in Chinese) |
[2]
|
Shi Gunagwei, Zhang Xin, Wang Linjie, et al. Application of the new chalcogenide glass in design of low cost thermal imaging systems[J]. Infrared and Laser Engineering, 2011, 40(4):615-619. (in Chinese) |
[3]
|
Wang Jing, Wu Yuehao, Jiang Bo, et al. Application of chalcogenide glass in designing a long wavelength infrared athermalized wide-angle lens[J]. Acta Photonica Sinica, 2016, 45(12):1211003. (in Chinese) |
[4]
|
Lu Yajing, Song Baoan, Dong Wei, et al. Application of chalcogenide glass in car night-vision system[J]. Infrared and Laser Engineering, 2014, 43(9):2815-2818. (in Chinese) |
[5]
|
Ma K J, Chien H H, Huang S W, et al. Contactless molding of arrayed chalcogenide glass lenses[J]. Journal of Non-Crystalline Solids, 2011, 357(2011):2484-2488. |
[6]
|
Chien H H, Kuo C H, Huang S W. Molding of Al2O3-coated chalcogenide glass lenses[J]. Optical Engineering, 2012, 51(3):033401-033407. |
[7]
|
Cogburn G, Symmons A, Mertus L, et al. Molding aspheric lenses for low-cost production versus diamond turned lenses[C]//Proceedings of SPIE, 2010, 7660(20):1-6. |
[8]
|
Cha D H, Kim H J, Park H S, et al. Effect of temperature on the molding of chalcogenide glass lenses for infrared imaging applications[J]. Applied Optics, 2010, 49(9):1607-1613. |
[9]
|
Cha D H, Kim J H, Kim H J. Experimental study of the fabrication of chalcogenide glass lenses by using precision glass molding[J]. Journal of the Korean Physical Society, 2014, 65(10):1675-1681. |
[10]
|
Wang Zhibin, Li Junqi, Zhang Feng, et al. The design of mold with simulation for chalcogenide glass precision molding[J]. Opto-Electronic Engineering, 2016, 43(5):53-58. (in Chinese) |
[11]
|
Zhou Tianfeng, Xie Jiaqing, Liu Yang, et al. Simulation and experimental study on the molding process for microgrooveson optical glass[J]. Opto-Electronic Engineering, 2016, 24(10):446-453. (in Chinese) |
[12]
|
Braunecker B, Hentschel R, Tiziani H. Advanced Optics Using Aspherical Elements Understanding Fiber Optics[M]. Hangzhou:Zhejiang University Press, 2011. (in Chinese) |
[13]
|
Wang Xunsi, Chen Qiong, Fan Xinye, et al. Far infrared spectral studies of Ge-Sb-Se glasses[J]. Acta Photonica Sinica, 2008, 37(1):81-85. (in Chinese) |
[14]
|
Lee J H, Lee W H, Park J K, et al. Thermal properties of ternary Ge-Sb-Se chalcogenide glass for use in molded lens applications[J]. Journal of Non-Crystalline Solids, 2016, 431:41-46. |
[15]
|
Ananthasayanam B, Joseph P F, Joshi D, et al. Final shape of precision molded optics:Part I-Computational approach, material definitions and the effect of lens shape[J]. Journal of Thermal Stresses, 2012, 35(6):550-578. |
[16]
|
Zhou J, Li M J, Hu Y, et al. Numerical evaluation on the curve deviation of the molded glass lens[J]. Journal of Manufacturing Science and Engineering, 2014, 136(051004):1-11. |
[17]
|
Tian Yingliang, Sun Shibing. New Glass Technology[M]. Beijing:China Light Industry Press, 2009. (in Chinese) |
[18]
|
Yan J W, Zhou T F, Masuda J, et al. Modeling high-temperature glass molding process by coupling heat transfer and viscous deformation analysis[J]. Precision Engineering, 2009, 33(2):150-159. |
[19]
|
Aylord S, Ananthasayanam B, Tincher B, et al. Thermal and structural property characterization of commercially moldable glasses[J]. J Am Ceram Soc, 2010, 93(8):2207-2214. |