留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

全捷联激光制导寻的器测角精度分析与优化

高思远 刘慧 朱明超 张鑫 白杨

高思远, 刘慧, 朱明超, 张鑫, 白杨. 全捷联激光制导寻的器测角精度分析与优化[J]. 红外与激光工程, 2015, 44(7): 2169-2174.
引用本文: 高思远, 刘慧, 朱明超, 张鑫, 白杨. 全捷联激光制导寻的器测角精度分析与优化[J]. 红外与激光工程, 2015, 44(7): 2169-2174.
Gao Siyuan, Liu Hui, Zhu Mingchao, Zhang Xin, Bai Yang. Analysis and optimization of angle measurement accuracy of strap-down laser semi-active guidance seeker[J]. Infrared and Laser Engineering, 2015, 44(7): 2169-2174.
Citation: Gao Siyuan, Liu Hui, Zhu Mingchao, Zhang Xin, Bai Yang. Analysis and optimization of angle measurement accuracy of strap-down laser semi-active guidance seeker[J]. Infrared and Laser Engineering, 2015, 44(7): 2169-2174.

全捷联激光制导寻的器测角精度分析与优化

基金项目: 

中国科学院知识创新工程国防科技创新重要方向项目(YYYJ-1122);中国科学院三期知识创新工程

详细信息
    作者简介:

    高思远(1983-),男,助理研究员,硕士,主要从事嵌入式系统方面的研究。Email:gaosiyuan2008@aliyun.com

  • 中图分类号: TP273

Analysis and optimization of angle measurement accuracy of strap-down laser semi-active guidance seeker

  • 摘要: 为了降低激光制导武器系统成本并保证打击精度, 设计了全捷联激光制导寻的器, 并对影响打击精度的关键技术指标测角精度进行了研究。首先对影响测角精度的主要因素增益控制进行了分析, 通过对四通道可变增益放大器进行增益标定和最小二乘拟合得到增益控制曲线, 接着讨论了离散量控制下增益补偿的方法及误差, 仿真计算得到不同配置模式下增益补偿前和补偿后的光斑重心计算误差。对全捷联激光制导寻的器进行激光照射测角试验, 结果表明, 增益补偿后能够消除系统误差约5.6 mrad, 在中心线性视场范围内, 测角精度达到2 mrad。该系统满足某机载轻型空地导弹对激光制导寻的器测角精度的要求, 为精确末制导提供保障。
  • [1] Wang Kuangbiao. Status quo, key technology and development of laser guided weapon[J]. Infrared and Laser Engineering, 2007, 36(5): 652-655. (in Chinese)
    [2]
    [3]
    [4] Bao Haige. Development of the laser semi-active homing guidance weapons [J]. Ship Electronic Engineering, 2010, 30(5): 21-25. (in Chinese)
    [5] Zhao Xin, Tong Shoufeng, Liu Yunqing, et al. Application research on four-quadrant detector in space laser communication system[J]. Journal of OptoelectronicsLaser, 2010, 21(1): 47-49. (in Chinese)
    [6]
    [7]
    [8] Huang Jipeng, Wang Yanjie, Sun Honghai, et al. Precise position measuring system of laser spots[J]. Optics and Precision Engineering, 2013, 21(4): 842-847. (in Chinese)
    [9] Wei Wenjian, Qin Shiqiao, Zhang Baodong, et al. Design on the optical system of laser semi-active seeking guided hardware-in-the-loop simulation seeker[J]. Infrared and Laser Engineering, 2008, 37(2): 323-325. (in Chinese)
    [10]
    [11] He Hengxiang, Chen Yiqing, Zhao Gang, et al. Analysis of the main parameters of the laser guided system[J]. Infrared and Laser Engineering, 2009, 38(3): 429-432. (in Chinese)
    [12]
    [13] Zhang Lei, Zhang Guoyu, Liu Yunqing. Affecting factor for detection accuracy of four-quadrant detector[J]. Chinese Journal of Lasers, 2012, 39(6): 1-5. (in Chinese)
    [14]
    [15] Zhang Wentao, Zhu Baohua. Research on the laser beam through turbulence atmosphere channel [J]. Journal of University of Electronic Science and Technology of China, 2007, 36(4): 785-787. (in Chinese)
    [16]
    [17] Manojlovic L M, Babaric Z P. Optimization of optical receiver parameters for pulsed laser tracking system[J]. IEEE Transactions on Instrumentation and Measurement, 2009, 58(3): 681-690.
    [18]
    [19] Shen Hao, Qi Zaikang. Fluence of laser spot random flutter on the precision of laser semi-active guidance[J]. Transactions of Beijing Institute of Technology, 2008, 28(2): 109-110. (in Chinese)
    [20]
    [21] Long Pengyi, Wang Xu'an. The research and engineering realization for a certain high precision arithmetic of the target space position[J]. Journal of Projectiles, Rockets,Missiles and Guidance, 2007, 27(1): 13-17. (in Chinese)
    [22]
    [23]
    [24] Chen Yong, Zhu Tianrui, Li Rui. Design and realization of the angle-measurement algorithm of the four-quadrant detector based on the interpolation algorithm[J]. Infrared and Laser Engineering, 2011, 40(3): 545-547. (in Chinese)
    [25] Hu Xianlong, Zhou Shichun. Analysis and research on several angle measurement algorithms based on four quadrant detector[J]. Laser and Infrared, 2007, 37(6): 547-549. (in Chinese)
  • [1] 赵文赫, 白杨杨, 王劲凯, 张立中.  基于双PSD的三维测角传感器精度分析 . 红外与激光工程, 2024, 53(2): 20230543-1-20230543-11. doi: 10.3788/IRLA20230543
    [2] 唐瑞鑫, 段存丽.  基于亚纳秒微片激光器的能量放大器的研究 . 红外与激光工程, 2022, 51(4): 20210200-1-20210200-5. doi: 10.3788/IRLA20210200
    [3] 王宁, 赵柏秦, 王帅, 王震.  PIN探测器和跨阻放大器的光电单片集成 . 红外与激光工程, 2021, 50(9): 20210076-1-20210076-6. doi: 10.3788/IRLA20210076
    [4] 陈林, 吴文龙, 赵军普, 王振国, 柳强.  400 mm口径片状放大器JG2钕玻璃增益与激光输出性能实验研究 . 红外与激光工程, 2021, 50(10): 20200461-1-20200461-6. doi: 10.3788/IRLA20200461
    [5] 杜鑫彪, 陈檬, 任俊杰, 高小强.  1 kHz高倍率亚纳秒全固态激光放大器研究 . 红外与激光工程, 2020, 49(3): 0305001-0305001-5. doi: 10.3788/IRLA202049.0305001
    [6] 王淋正, 邹华, 黄硕, 张航, 赵世宇.  中心开孔型四象限探测器光纤定位闭环控制方法 . 红外与激光工程, 2020, 49(6): 20190466-1-20190466-7. doi: 10.3788/IRLA20190466
    [7] 邱雄, 王仕成, 刘志国, 徐炜波.  激光导引头四象限探测器测角精度的建模研究 . 红外与激光工程, 2020, 49(7): 20190453-1-20190453-7. doi: 10.3788/IRLA20190453
    [8] 张美玲, 邹华, 刘金升, 王淋正.  基于四象限探测器的光纤焦比退化的测量方法 . 红外与激光工程, 2018, 47(6): 617001-0617001(6). doi: 10.3788/IRLA201847.0617001
    [9] 李慧, 梁巍巍, 殷瑞光, 王敏, 许振领, 王彦斌.  干扰和噪声对激光制导性能及精度的影响 . 红外与激光工程, 2017, 46(2): 206005-0206005(8). doi: 10.3788/IRLA201746.0206005
    [10] 唐彦琴, 顾国华, 钱惟贤, 陈钱, 张骏.  四象限探测器基于高斯分布的激光光斑中心定位算法 . 红外与激光工程, 2017, 46(2): 206003-0206003(7). doi: 10.3788/IRLA201746.0206003
    [11] 张伟, 张合, 张祥金.  小型大瞬时视场光学探测系统优化设计 . 红外与激光工程, 2016, 45(5): 518002-0518002(6). doi: 10.3788/IRLA201645.0518002
    [12] 张伟, 张合, 张祥金.  捷联激光制导弹药末段全弹道目标捕获仿真 . 红外与激光工程, 2016, 45(12): 1231001-1231001(6). doi: 10.3788/IRLA201645.1231001
    [13] 刘岩俊, 闫海霞, 王东鹤.  大视场红外光电经纬仪精度标定 . 红外与激光工程, 2015, 44(3): 832-836.
    [14] 叶建森, 施蕊, 田义, 马强, 王欣, 李卓.  激光目标回波模拟器时域特性研究 . 红外与激光工程, 2015, 44(2): 471-476.
    [15] 闫海霞, 刘岩俊, 王东鹤.  光电经纬仪动态误差修正方法 . 红外与激光工程, 2014, 43(9): 3030-3035.
    [16] 李磊, 王建磊, 程小劲, 刘晶, 施翔春, 陈卫标.  低温重复率Yb:YAG 固体激光放大器 . 红外与激光工程, 2013, 42(5): 1170-1173.
    [17] 魏枫林, 母一宁, 尚瑞瑞, 刘泉.  基于四象序列的最大熵原则的光轴对准方法 . 红外与激光工程, 2013, 42(7): 1902-1906.
    [18] 肖韶荣, 周洁, 赵静, 黄新.  温度对激光光斑跟踪不确定度的影响 . 红外与激光工程, 2013, 42(3): 605-610.
    [19] 李永刚, 丁金伟, 刘仲宇, 撖芃芃, 张葆.  光电编码器的传动方式及其传动精度分析 . 红外与激光工程, 2013, 42(11): 3008-3012.
    [20] 梁巍巍, 殷瑞光, 李慧, 赵宏鹏, 张文攀.  激光损伤四象限探测器对制导武器的影响 . 红外与激光工程, 2013, 42(10): 2672-2676.
  • 加载中
计量
  • 文章访问数:  552
  • HTML全文浏览量:  109
  • PDF下载量:  214
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-11-05
  • 修回日期:  2014-12-06
  • 刊出日期:  2015-07-25

全捷联激光制导寻的器测角精度分析与优化

    作者简介:

    高思远(1983-),男,助理研究员,硕士,主要从事嵌入式系统方面的研究。Email:gaosiyuan2008@aliyun.com

基金项目:

中国科学院知识创新工程国防科技创新重要方向项目(YYYJ-1122);中国科学院三期知识创新工程

  • 中图分类号: TP273

摘要: 为了降低激光制导武器系统成本并保证打击精度, 设计了全捷联激光制导寻的器, 并对影响打击精度的关键技术指标测角精度进行了研究。首先对影响测角精度的主要因素增益控制进行了分析, 通过对四通道可变增益放大器进行增益标定和最小二乘拟合得到增益控制曲线, 接着讨论了离散量控制下增益补偿的方法及误差, 仿真计算得到不同配置模式下增益补偿前和补偿后的光斑重心计算误差。对全捷联激光制导寻的器进行激光照射测角试验, 结果表明, 增益补偿后能够消除系统误差约5.6 mrad, 在中心线性视场范围内, 测角精度达到2 mrad。该系统满足某机载轻型空地导弹对激光制导寻的器测角精度的要求, 为精确末制导提供保障。

English Abstract

参考文献 (25)

目录

    /

    返回文章
    返回